kernel/linux.git/arch/powerpc/lib, branch v6.19.11

powerpc/qspinlock: Add spinlock contention tracepoint

2025-09-01T08:08:12+00:00

Add a lock contention tracepoint in the queued spinlock slowpath. Also add the __lockfunc annotation so that in_lock_functions() works as expected. Signed-off-by: Nysal Jan K.A. Reviewed-by: Shrikanth Hegde Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20250731061856.1858898-1-nysal@linux.ibm.com

Merge tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux

2025-07-29T00:58:52+00:00

Pull crypto library updates from Eric Biggers: "This is the main crypto library pull request for 6.17. The main focus this cycle is on reorganizing the SHA-1 and SHA-2 code, providing high-quality library APIs for SHA-1 and SHA-2 including HMAC support, and establishing conventions for lib/crypto/ going forward: - Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares most of the SHA-512 code) into lib/crypto/. This includes both the generic and architecture-optimized code. Greatly simplify how the architecture-optimized code is integrated. Add an easy-to-use library API for each SHA variant, including HMAC support. Finally, reimplement the crypto_shash support on top of the library API. - Apply the same reorganization to the SHA-256 code (and also SHA-224 which shares most of the SHA-256 code). This is a somewhat smaller change, due to my earlier work on SHA-256. But this brings in all the same additional improvements that I made for SHA-1 and SHA-512. There are also some smaller changes: - Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For these algorithms it's just a move, not a full reorganization yet. - Fix the MIPS chacha-core.S to build with the clang assembler. - Fix the Poly1305 functions to work in all contexts. - Fix a performance regression in the x86_64 Poly1305 code. - Clean up the x86_64 SHA-NI optimized SHA-1 assembly code. Note that since the new organization of the SHA code is much simpler, the diffstat of this pull request is negative, despite the addition of new fully-documented library APIs for multiple SHA and HMAC-SHA variants. These APIs will allow further simplifications across the kernel as users start using them instead of the old-school crypto API. (I've already written a lot of such conversion patches, removing over 1000 more lines of code. But most of those will target 6.18 or later)" * tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (67 commits) lib/crypto: arm64/sha512-ce: Drop compatibility macros for older binutils lib/crypto: x86/sha1-ni: Convert to use rounds macros lib/crypto: x86/sha1-ni: Minor optimizations and cleanup crypto: sha1 - Remove sha1_base.h lib/crypto: x86/sha1: Migrate optimized code into library lib/crypto: sparc/sha1: Migrate optimized code into library lib/crypto: s390/sha1: Migrate optimized code into library lib/crypto: powerpc/sha1: Migrate optimized code into library lib/crypto: mips/sha1: Migrate optimized code into library lib/crypto: arm64/sha1: Migrate optimized code into library lib/crypto: arm/sha1: Migrate optimized code into library crypto: sha1 - Use same state format as legacy drivers crypto: sha1 - Wrap library and add HMAC support lib/crypto: sha1: Add HMAC support lib/crypto: sha1: Add SHA-1 library functions lib/crypto: sha1: Rename sha1_init() to sha1_init_raw() crypto: x86/sha1 - Rename conflicting symbol lib/crypto: sha2: Add hmac_sha*_init_usingrawkey() lib/crypto: arm/poly1305: Remove unneeded empty weak function lib/crypto: x86/poly1305: Fix performance regression on short messages ...

lib/crc: powerpc: Migrate optimized CRC code into lib/crc/

2025-06-30T16:31:57+00:00

Move the powerpc-optimized CRC code from arch/powerpc/lib/crc* into its new location in lib/crc/powerpc/, and wire it up in the new way. This new way of organizing the CRC code eliminates the need to artificially split the code for each CRC variant into separate arch and generic modules, enabling better inlining and dead code elimination. For more details, see "lib/crc: Prepare for arch-optimized code in subdirs of lib/crc/". Reviewed-by: "Martin K. Petersen" Acked-by: Ingo Molnar Acked-by: "Jason A. Donenfeld" Link: https://lore.kernel.org/r/20250607200454.73587-8-ebiggers@kernel.org Signed-off-by: Eric Biggers

lib/crypto: powerpc: Move arch/powerpc/lib/crypto/ into lib/crypto/

2025-06-30T16:26:20+00:00

Move the contents of arch/powerpc/lib/crypto/ into lib/crypto/powerpc/. The new code organization makes a lot more sense for how this code actually works and is developed. In particular, it makes it possible to build each algorithm as a single module, with better inlining and dead code elimination. For a more detailed explanation, see the patchset which did this for the CRC library code: https://lore.kernel.org/r/20250607200454.73587-1-ebiggers@kernel.org/. Also see the patchset which did this for SHA-512: https://lore.kernel.org/linux-crypto/20250616014019.415791-1-ebiggers@kernel.org/ This is just a preparatory commit, which does the move to get the files into their new location but keeps them building the same way as before. Later commits will make the actual improvements to the way the arch-optimized code is integrated for each algorithm. Acked-by: Ard Biesheuvel Reviewed-by: Martin K. Petersen Reviewed-by: Sohil Mehta Link: https://lore.kernel.org/r/20250619191908.134235-5-ebiggers@kernel.org Signed-off-by: Eric Biggers

Merge tag 'powerpc-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2025-05-26T21:38:57+00:00

Pull powerpc updates from Madhavan Srinivasan: - Support for dynamic preemption - Migrate powerpc boards GPIO driver to new setter API - Added new PMU for KVM host-wide measurement - Enhancement to htmdump driver to support more functions - Added character device for couple RTAS supported APIs - Minor fixes and cleanup Thanks to Amit Machhiwal, Athira Rajeev, Bagas Sanjaya, Bartosz Golaszewski, Christophe Leroy, Eddie James, Gaurav Batra, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Jiri Slaby (SUSE), Linus Walleij, Michal Suchanek, Naveen N Rao (AMD), Nilay Shroff, Ricardo B. Marlière, Ritesh Harjani (IBM), Sathvika Vasireddy, Shrikanth Hegde, Stephen Rothwell, Sourabh Jain, Thorsten Blum, Vaibhav Jain, Venkat Rao Bagalkote, and Viktor Malik. * tag 'powerpc-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (52 commits) MAINTAINERS: powerpc: Remove myself as a reviewer powerpc/iommu: Use str_disabled_enabled() helper powerpc/powermac: Use str_enabled_disabled() and str_on_off() helpers powerpc/mm/fault: Use str_write_read() helper function powerpc: Replace strcpy() with strscpy() in proc_ppc64_init() powerpc/pseries/iommu: Fix kmemleak in TCE table userspace view powerpc/kernel: Fix ppc_save_regs inclusion in build powerpc: Transliterate author name and remove FIXME powerpc/pseries/htmdump: Include header file to get is_kvm_guest() definition KVM: PPC: Book3S HV: Fix IRQ map warnings with XICS on pSeries KVM Guest powerpc/8xx: Reduce alignment constraint for kernel memory powerpc/boot: Fix build with gcc 15 powerpc/pseries/htmdump: Add documentation for H_HTM debugfs interface powerpc/pseries/htmdump: Add htm capabilities support to htmdump module powerpc/pseries/htmdump: Add htm flags support to htmdump module powerpc/pseries/htmdump: Add htm setup support to htmdump module powerpc/pseries/htmdump: Add htm info support to htmdump module powerpc/pseries/htmdump: Add htm status support to htmdump module powerpc/pseries/htmdump: Add htm start support to htmdump module powerpc/pseries/htmdump: Add htm configure support to htmdump module ...

Merge tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2025-05-26T20:47:28+00:00

Pull crypto updates from Herbert Xu: "API: - Fix memcpy_sglist to handle partially overlapping SG lists - Use memcpy_sglist to replace null skcipher - Rename CRYPTO_TESTS to CRYPTO_BENCHMARK - Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS - Hide CRYPTO_MANAGER - Add delayed freeing of driver crypto_alg structures Compression: - Allocate large buffers on first use instead of initialisation in scomp - Drop destination linearisation buffer in scomp - Move scomp stream allocation into acomp - Add acomp scatter-gather walker - Remove request chaining - Add optional async request allocation Hashing: - Remove request chaining - Add optional async request allocation - Move partial block handling into API - Add ahash support to hmac - Fix shash documentation to disallow usage in hard IRQs Algorithms: - Remove unnecessary SIMD fallback code on x86 and arm/arm64 - Drop avx10_256 xts(aes)/ctr(aes) on x86 - Improve avx-512 optimisations for xts(aes) - Move chacha arch implementations into lib/crypto - Move poly1305 into lib/crypto and drop unused Crypto API algorithm - Disable powerpc/poly1305 as it has no SIMD fallback - Move sha256 arch implementations into lib/crypto - Convert deflate to acomp - Set block size correctly in cbcmac Drivers: - Do not use sg_dma_len before mapping in sun8i-ss - Fix warm-reboot failure by making shutdown do more work in qat - Add locking in zynqmp-sha - Remove cavium/zip - Add support for PCI device 0x17D8 to ccp - Add qat_6xxx support in qat - Add support for RK3576 in rockchip-rng - Add support for i.MX8QM in caam Others: - Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up - Add new SEV/SNP platform shutdown API in ccp" * tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (382 commits) x86/fpu: Fix irq_fpu_usable() to return false during CPU onlining crypto: qat - add missing header inclusion crypto: api - Redo lookup on EEXIST Revert "crypto: testmgr - Add hash export format testing" crypto: marvell/cesa - Do not chain submitted requests crypto: powerpc/poly1305 - add depends on BROKEN for now Revert "crypto: powerpc/poly1305 - Add SIMD fallback" crypto: ccp - Add missing tee info reg for teev2 crypto: ccp - Add missing bootloader info reg for pspv5 crypto: sun8i-ce - move fallback ahash_request to the end of the struct crypto: octeontx2 - Use dynamic allocated memory region for lmtst crypto: octeontx2 - Initialize cptlfs device info once crypto: xts - Only add ecb if it is not already there crypto: lrw - Only add ecb if it is not already there crypto: testmgr - Add hash export format testing crypto: testmgr - Use ahash for generic tfm crypto: hmac - Add ahash support crypto: testmgr - Ignore EEXIST on shash allocation crypto: algapi - Add driver template support to crypto_inst_setname crypto: shash - Set reqsize in shash_alg ...

crypto: powerpc/poly1305 - add depends on BROKEN for now

2025-05-20T22:53:56+00:00

As discussed in the thread containing https://lore.kernel.org/linux-crypto/20250510053308.GB505731@sol/, the Power10-optimized Poly1305 code is currently not safe to call in softirq context. Disable it for now. It can be re-enabled once it is fixed. Fixes: ba8f8624fde2 ("crypto: poly1305-p10 - Glue code for optmized Poly1305 implementation for ppc64le") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu

Revert "crypto: powerpc/poly1305 - Add SIMD fallback"

2025-05-20T22:53:36+00:00

This reverts commit c66d7ebbe2fa14e41913adb421090a7426f59786. Link: https://lore.kernel.org/all/02c22854-eebf-4ad1-b89e-8c2b65ab8236@csgroup.eu/ Signed-off-by: Herbert Xu

crypto: powerpc/poly1305 - Add SIMD fallback

2025-05-14T09:45:22+00:00

Add a SIMD fallback path for poly1305-p10 by converting the 2^64 based hash state into a 2^44 base. In order to ensure that the generic fallback is actually 2^44, add ARCH_SUPPORTS_INT128 to powerpc and make poly1305-p10 depend on it. Fixes: ba8f8624fde2 ("crypto: poly1305-p10 - Glue code for optmized Poly1305 implementation for ppc64le") Signed-off-by: Herbert Xu

crypto: lib/chacha - add array bounds to function prototypes

2025-05-12T05:32:53+00:00

Add explicit array bounds to the function prototypes for the parameters that didn't already get handled by the conversion to use chacha_state: - chacha_block_*(): Change 'u8 *out' or 'u8 *stream' to u8 out[CHACHA_BLOCK_SIZE]. - hchacha_block_*(): Change 'u32 *out' or 'u32 *stream' to u32 out[HCHACHA_OUT_WORDS]. - chacha_init(): Change 'const u32 *key' to 'const u32 key[CHACHA_KEY_WORDS]'. Change 'const u8 *iv' to 'const u8 iv[CHACHA_IV_SIZE]'. No functional changes. This just makes it clear when fixed-size arrays are expected. Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu