kernel/linux.git/arch/powerpc/include/asm, branch v6.18.21

powerpc/uaccess: Fix inline assembly for clang build on PPC32

2026-03-19T15:08:11+00:00

[ Upstream commit 0ee95a1d458630272d0415d0ffa9424fcb606c90 ] Test robot reports the following error with clang-16.0.6: In file included from kernel/rseq.c:75: include/linux/rseq_entry.h:141:3: error: invalid operand for instruction unsafe_get_user(offset, &ucs->post_commit_offset, efault); ^ include/linux/uaccess.h:608:2: note: expanded from macro 'unsafe_get_user' arch_unsafe_get_user(x, ptr, local_label); \ ^ arch/powerpc/include/asm/uaccess.h:518:2: note: expanded from macro 'arch_unsafe_get_user' __get_user_size_goto(__gu_val, __gu_addr, sizeof(*(p)), e); \ ^ arch/powerpc/include/asm/uaccess.h:284:2: note: expanded from macro '__get_user_size_goto' __get_user_size_allowed(x, ptr, size, __gus_retval); \ ^ arch/powerpc/include/asm/uaccess.h:275:10: note: expanded from macro '__get_user_size_allowed' case 8: __get_user_asm2(x, (u64 __user *)ptr, retval); break; \ ^ arch/powerpc/include/asm/uaccess.h:258:4: note: expanded from macro '__get_user_asm2' " li %1+1,0\n" \ ^ :7:5: note: instantiated into assembly here li 31+1,0 ^ 1 error generated. On PPC32, for 64 bits vars a pair of registers is used. Usually the lower register in the pair is the high part and the higher register is the low part. GCC uses r3/r4 ... r11/r12 ... r14/r15 ... r30/r31 In older kernel code inline assembly was using %1 and %1+1 to represent 64 bits values. However here it looks like clang uses r31 as high part, allthough r32 doesn't exist hence the error. Allthoug %1+1 should work, most places now use %L1 instead of %1+1, so let's do the same here. With that change, the build doesn't fail anymore and a disassembly shows clang uses r17/r18 and r31/r14 pair when GCC would have used r16/r17 and r30/r31: Disassembly of section .fixup: 00000000 <.fixup>: 0: 38 a0 ff f2 li r5,-14 4: 3a 20 00 00 li r17,0 8: 3a 40 00 00 li r18,0 c: 48 00 00 00 b c <.fixup+0xc> c: R_PPC_REL24 .text+0xbc 10: 38 a0 ff f2 li r5,-14 14: 3b e0 00 00 li r31,0 18: 39 c0 00 00 li r14,0 1c: 48 00 00 00 b 1c <.fixup+0x1c> 1c: R_PPC_REL24 .text+0x144 Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202602021825.otcItxGi-lkp@intel.com/ Fixes: c20beffeec3c ("powerpc/uaccess: Use flexible addressing with __put_user()/__get_user()") Signed-off-by: Christophe Leroy (CS GROUP) Acked-by: Nathan Chancellor Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/8ca3a657a650e497a96bfe7acde2f637dadab344.1770103646.git.chleroy@kernel.org Signed-off-by: Sasha Levin

powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling

2026-02-26T22:59:08+00:00

[ Upstream commit 815a8d2feb5615ae7f0b5befd206af0b0160614c ] The recent commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device hotplug safe") restructured the EEH driver to improve synchronization with the PCI hotplug layer. However, it inadvertently moved pci_lock_rescan_remove() outside its intended scope in eeh_handle_normal_event(), leading to broken PCI error reporting and improper EEH event triggering. Specifically, eeh_handle_normal_event() acquired pci_lock_rescan_remove() before calling eeh_pe_bus_get(), but eeh_pe_bus_get() itself attempts to acquire the same lock internally, causing nested locking and disrupting normal EEH event handling paths. This patch adds a boolean parameter do_lock to _eeh_pe_bus_get(), with two public wrappers: eeh_pe_bus_get() with locking enabled. eeh_pe_bus_get_nolock() that skips locking. Callers that already hold pci_lock_rescan_remove() now use eeh_pe_bus_get_nolock() to avoid recursive lock acquisition. Additionally, pci_lock_rescan_remove() calls are restored to the correct position—after eeh_pe_bus_get() and immediately before iterating affected PEs and devices. This ensures EEH-triggered PCI removes occur under proper bus rescan locking without recursive lock contention. The eeh_pe_loc_get() function has been split into two functions: eeh_pe_loc_get(struct eeh_pe *pe) which retrieves the loc for given PE. eeh_pe_loc_get_bus(struct pci_bus *bus) which retrieves the location code for given bus. This resolves lockdep warnings such as: [ 84.964298] [ T928] ============================================ [ 84.964304] [ T928] WARNING: possible recursive locking detected [ 84.964311] [ T928] 6.18.0-rc3 #51 Not tainted [ 84.964315] [ T928] -------------------------------------------- [ 84.964320] [ T928] eehd/928 is trying to acquire lock: [ 84.964324] [ T928] c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40 [ 84.964342] [ T928] but task is already holding lock: [ 84.964347] [ T928] c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40 [ 84.964357] [ T928] other info that might help us debug this: [ 84.964363] [ T928] Possible unsafe locking scenario: [ 84.964367] [ T928] CPU0 [ 84.964370] [ T928] ---- [ 84.964373] [ T928] lock(pci_rescan_remove_lock); [ 84.964378] [ T928] lock(pci_rescan_remove_lock); [ 84.964383] [ T928] *** DEADLOCK *** [ 84.964388] [ T928] May be due to missing lock nesting notation [ 84.964393] [ T928] 1 lock held by eehd/928: [ 84.964397] [ T928] #0: c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40 [ 84.964408] [ T928] stack backtrace: [ 84.964414] [ T928] CPU: 2 UID: 0 PID: 928 Comm: eehd Not tainted 6.18.0-rc3 #51 VOLUNTARY [ 84.964417] [ T928] Hardware name: IBM,9080-HEX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_022) hv:phyp pSeries [ 84.964419] [ T928] Call Trace: [ 84.964420] [ T928] [c0000011a7157990] [c000000001705de4] dump_stack_lvl+0xc8/0x130 (unreliable) [ 84.964424] [ T928] [c0000011a71579d0] [c0000000002f66e0] print_deadlock_bug+0x430/0x440 [ 84.964428] [ T928] [c0000011a7157a70] [c0000000002fd0c0] __lock_acquire+0x1530/0x2d80 [ 84.964431] [ T928] [c0000011a7157ba0] [c0000000002fea54] lock_acquire+0x144/0x410 [ 84.964433] [ T928] [c0000011a7157cb0] [c0000011a7157cb0] __mutex_lock+0xf4/0x1050 [ 84.964436] [ T928] [c0000011a7157e00] [c000000000de21d8] pci_lock_rescan_remove+0x28/0x40 [ 84.964439] [ T928] [c0000011a7157e20] [c00000000004ed98] eeh_pe_bus_get+0x48/0xc0 [ 84.964442] [ T928] [c0000011a7157e50] [c000000000050434] eeh_handle_normal_event+0x64/0xa60 [ 84.964446] [ T928] [c0000011a7157f30] [c000000000051de8] eeh_event_handler+0xf8/0x190 [ 84.964450] [ T928] [c0000011a7157f90] [c0000000002747ac] kthread+0x16c/0x180 [ 84.964453] [ T928] [c0000011a7157fe0] [c00000000000ded8] start_kernel_thread+0x14/0x18 Fixes: 1010b4c012b0 ("powerpc/eeh: Make EEH driver device hotplug safe") Signed-off-by: Narayana Murty N Reviewed-by: Sourabh Jain Reviewed-by: Mahesh Salgaonkar Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20251210142559.8874-1-nnmlinux@linux.ibm.com Signed-off-by: Sasha Levin

powerpc/uaccess: Move barrier_nospec() out of allow_read_{from/write}_user()

2026-02-26T22:59:08+00:00

[ Upstream commit 5fbc09eb0b4f4b1a4b33abebacbeee0d29f195e9 ] Commit 74e19ef0ff80 ("uaccess: Add speculation barrier to copy_from_user()") added a redundant barrier_nospec() in copy_from_user(), because powerpc is already calling barrier_nospec() in allow_read_from_user() and allow_read_write_user(). But on other architectures that call to barrier_nospec() was missing. So change powerpc instead of reverting the above commit and having to fix other architectures one by one. This is now possible because barrier_nospec() has also been added in copy_from_user_iter(). Move barrier_nospec() out of allow_read_from_user() and allow_read_write_user(). This will also allow reuse of those functions when implementing masked user access which doesn't require barrier_nospec(). Don't add it back in raw_copy_from_user() as it is already called by copy_from_user() and copy_from_user_iter(). Fixes: 74e19ef0ff80 ("uaccess: Add speculation barrier to copy_from_user()") Signed-off-by: Christophe Leroy Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/f29612105c5fcbc8ceb7303808ddc1a781f0f6b5.1766574657.git.chleroy@kernel.org Signed-off-by: Sasha Levin

powerpc/64s/slb: Fix SLB multihit issue during SLB preload

2026-01-08T09:16:57+00:00

commit 00312419f0863964625d6dcda8183f96849412c6 upstream. On systems using the hash MMU, there is a software SLB preload cache that mirrors the entries loaded into the hardware SLB buffer. This preload cache is subject to periodic eviction — typically after every 256 context switches — to remove old entry. To optimize performance, the kernel skips switch_mmu_context() in switch_mm_irqs_off() when the prev and next mm_struct are the same. However, on hash MMU systems, this can lead to inconsistencies between the hardware SLB and the software preload cache. If an SLB entry for a process is evicted from the software cache on one CPU, and the same process later runs on another CPU without executing switch_mmu_context(), the hardware SLB may retain stale entries. If the kernel then attempts to reload that entry, it can trigger an SLB multi-hit error. The following timeline shows how stale SLB entries are created and can cause a multi-hit error when a process moves between CPUs without a MMU context switch. CPU 0 CPU 1 ----- ----- Process P exec swapper/1 load_elf_binary begin_new_exc activate_mm switch_mm_irqs_off switch_mmu_context switch_slb /* * This invalidates all * the entries in the HW * and setup the new HW * SLB entries as per the * preload cache. */ context_switch sched_migrate_task migrates process P to cpu-1 Process swapper/0 context switch (to process P) (uses mm_struct of Process P) switch_mm_irqs_off() switch_slb load_slb++ /* * load_slb becomes 0 here * and we evict an entry from * the preload cache with * preload_age(). We still * keep HW SLB and preload * cache in sync, that is * because all HW SLB entries * anyways gets evicted in * switch_slb during SLBIA. * We then only add those * entries back in HW SLB, * which are currently * present in preload_cache * (after eviction). */ load_elf_binary continues... setup_new_exec() slb_setup_new_exec() sched_switch event sched_migrate_task migrates process P to cpu-0 context_switch from swapper/0 to Process P switch_mm_irqs_off() /* * Since both prev and next mm struct are same we don't call * switch_mmu_context(). This will cause the HW SLB and SW preload * cache to go out of sync in preload_new_slb_context. Because there * was an SLB entry which was evicted from both HW and preload cache * on cpu-1. Now later in preload_new_slb_context(), when we will try * to add the same preload entry again, we will add this to the SW * preload cache and then will add it to the HW SLB. Since on cpu-0 * this entry was never invalidated, hence adding this entry to the HW * SLB will cause a SLB multi-hit error. */ load_elf_binary continues... START_THREAD start_thread preload_new_slb_context /* * This tries to add a new EA to preload cache which was earlier * evicted from both cpu-1 HW SLB and preload cache. This caused the * HW SLB of cpu-0 to go out of sync with the SW preload cache. The * reason for this was, that when we context switched back on CPU-0, * we should have ideally called switch_mmu_context() which will * bring the HW SLB entries on CPU-0 in sync with SW preload cache * entries by setting up the mmu context properly. But we didn't do * that since the prev mm_struct running on cpu-0 was same as the * next mm_struct (which is true for swapper / kernel threads). So * now when we try to add this new entry into the HW SLB of cpu-0, * we hit a SLB multi-hit error. */ WARNING: CPU: 0 PID: 1810970 at arch/powerpc/mm/book3s64/slb.c:62 assert_slb_presence+0x2c/0x50(48 results) 02:47:29 [20157/42149] Modules linked in: CPU: 0 UID: 0 PID: 1810970 Comm: dd Not tainted 6.16.0-rc3-dirty #12 VOLUNTARY Hardware name: IBM pSeries (emulated by qemu) POWER8 (architected) 0x4d0200 0xf000004 of:SLOF,HEAD hv:linux,kvm pSeries NIP: c00000000015426c LR: c0000000001543b4 CTR: 0000000000000000 REGS: c0000000497c77e0 TRAP: 0700 Not tainted (6.16.0-rc3-dirty) MSR: 8000000002823033 CR: 28888482 XER: 00000000 CFAR: c0000000001543b0 IRQMASK: 3 <...> NIP [c00000000015426c] assert_slb_presence+0x2c/0x50 LR [c0000000001543b4] slb_insert_entry+0x124/0x390 Call Trace: 0x7fffceb5ffff (unreliable) preload_new_slb_context+0x100/0x1a0 start_thread+0x26c/0x420 load_elf_binary+0x1b04/0x1c40 bprm_execve+0x358/0x680 do_execveat_common+0x1f8/0x240 sys_execve+0x58/0x70 system_call_exception+0x114/0x300 system_call_common+0x160/0x2c4 >From the above analysis, during early exec the hardware SLB is cleared, and entries from the software preload cache are reloaded into hardware by switch_slb. However, preload_new_slb_context and slb_setup_new_exec also attempt to load some of the same entries, which can trigger a multi-hit. In most cases, these additional preloads simply hit existing entries and add nothing new. Removing these functions avoids redundant preloads and eliminates the multi-hit issue. This patch removes these two functions. We tested process switching performance using the context_switch benchmark on POWER9/hash, and observed no regression. Without this patch: 129041 ops/sec With this patch: 129341 ops/sec We also measured SLB faults during boot, and the counts are essentially the same with and without this patch. SLB faults without this patch: 19727 SLB faults with this patch: 19786 Fixes: 5434ae74629a ("powerpc/64s/hash: Add a SLB preload cache") cc: stable@vger.kernel.org Suggested-by: Nicholas Piggin Signed-off-by: Donet Tom Signed-off-by: Ritesh Harjani (IBM) Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/0ac694ae683494fe8cadbd911a1a5018d5d3c541.1761834163.git.ritesh.list@gmail.com Signed-off-by: Greg Kroah-Hartman

powerpc, mm: Fix mprotect on book3s 32-bit

2026-01-08T09:16:57+00:00

commit 78fc63ffa7813e33681839bb33826c24195f0eb7 upstream. On 32-bit book3s with hash-MMUs, tlb_flush() was a no-op. This was unnoticed because all uses until recently were for unmaps, and thus handled by __tlb_remove_tlb_entry(). After commit 4a18419f71cd ("mm/mprotect: use mmu_gather") in kernel 5.19, tlb_gather_mmu() started being used for mprotect as well. This caused mprotect to simply not work on these machines: int *ptr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); *ptr = 1; // force HPTE to be created mprotect(ptr, 4096, PROT_READ); *ptr = 2; // should segfault, but succeeds Fixed by making tlb_flush() actually flush TLB pages. This finally agrees with the behaviour of boot3s64's tlb_flush(). Fixes: 4a18419f71cd ("mm/mprotect: use mmu_gather") Cc: stable@vger.kernel.org Reviewed-by: Christophe Leroy Reviewed-by: Ritesh Harjani (IBM) Signed-off-by: Dave Vasilevsky Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20251116-vasi-mprotect-g3-v3-1-59a9bd33ba00@vasilevsky.ca Signed-off-by: Greg Kroah-Hartman

crash: let architecture decide crash memory export to iomem_resource

2026-01-02T11:57:11+00:00

commit adc15829fb73e402903b7030729263b6ee4a7232 upstream. With the generic crashkernel reservation, the kernel emits the following warning on powerpc: WARNING: CPU: 0 PID: 1 at arch/powerpc/mm/mem.c:341 add_system_ram_resources+0xfc/0x180 Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-auto-12607-g5472d60c129f #1 VOLUNTARY Hardware name: IBM,9080-HEX Power11 (architected) 0x820200 0xf000007 of:IBM,FW1110.01 (NH1110_069) hv:phyp pSeries NIP: c00000000201de3c LR: c00000000201de34 CTR: 0000000000000000 REGS: c000000127cef8a0 TRAP: 0700 Not tainted (6.17.0-auto-12607-g5472d60c129f) MSR: 8000000002029033 CR: 84000840 XER: 20040010 CFAR: c00000000017eed0 IRQMASK: 0 GPR00: c00000000201de34 c000000127cefb40 c0000000016a8100 0000000000000001 GPR04: c00000012005aa00 0000000020000000 c000000002b705c8 0000000000000000 GPR08: 000000007fffffff fffffffffffffff0 c000000002db8100 000000011fffffff GPR12: c00000000201dd40 c000000002ff0000 c0000000000112bc 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c0000000015a3808 GPR24: c00000000200468c c000000001699888 0000000000000106 c0000000020d1950 GPR28: c0000000014683f8 0000000081000200 c0000000015c1868 c000000002b9f710 NIP [c00000000201de3c] add_system_ram_resources+0xfc/0x180 LR [c00000000201de34] add_system_ram_resources+0xf4/0x180 Call Trace: add_system_ram_resources+0xf4/0x180 (unreliable) do_one_initcall+0x60/0x36c do_initcalls+0x120/0x220 kernel_init_freeable+0x23c/0x390 kernel_init+0x34/0x26c ret_from_kernel_user_thread+0x14/0x1c This warning occurs due to a conflict between crashkernel and System RAM iomem resources. The generic crashkernel reservation adds the crashkernel memory range to /proc/iomem during early initialization. Later, all memblock ranges are added to /proc/iomem as System RAM. If the crashkernel region overlaps with any memblock range, it causes a conflict while adding those memblock regions as iomem resources, triggering the above warning. The conflicting memblock regions are then omitted from /proc/iomem. For example, if the following crashkernel region is added to /proc/iomem: 20000000-11fffffff : Crash kernel then the following memblock regions System RAM regions fail to be inserted: 00000000-7fffffff : System RAM 80000000-257fffffff : System RAM Fix this by not adding the crashkernel memory to /proc/iomem on powerpc. Introduce an architecture hook to let each architecture decide whether to export the crashkernel region to /proc/iomem. For more info checkout commit c40dd2f766440 ("powerpc: Add System RAM to /proc/iomem") and commit bce074bdbc36 ("powerpc: insert System RAM resource to prevent crashkernel conflict") Note: Before switching to the generic crashkernel reservation, powerpc never exported the crashkernel region to /proc/iomem. Link: https://lkml.kernel.org/r/20251016142831.144515-1-sourabhjain@linux.ibm.com Fixes: e3185ee438c2 ("powerpc/crash: use generic crashkernel reservation"). Signed-off-by: Sourabh Jain Reported-by: Venkat Rao Bagalkote Closes: https://lore.kernel.org/all/90937fe0-2e76-4c82-b27e-7b8a7fe3ac69@linux.ibm.com/ Tested-by: Venkat Rao Bagalkote Cc: Baoquan he Cc: Hari Bathini Cc: Madhavan Srinivasan Cc: Mahesh Salgaonkar Cc: Michael Ellerman Cc: Ritesh Harjani (IBM) Cc: Vivek Goyal Cc: Dave Young Cc: Mike Rapoport Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2025-10-06T19:37:34+00:00

Pull x86 kvm updates from Paolo Bonzini: "Generic: - Rework almost all of KVM's exports to expose symbols only to KVM's x86 vendor modules (kvm-{amd,intel}.ko and PPC's kvm-{pr,hv}.ko x86: - Rework almost all of KVM x86's exports to expose symbols only to KVM's vendor modules, i.e. to kvm-{amd,intel}.ko - Add support for virtualizing Control-flow Enforcement Technology (CET) on Intel (Shadow Stacks and Indirect Branch Tracking) and AMD (Shadow Stacks). It is worth noting that while SHSTK and IBT can be enabled separately in CPUID, it is not really possible to virtualize them separately. Therefore, Intel processors will really allow both SHSTK and IBT under the hood if either is made visible in the guest's CPUID. The alternative would be to intercept XSAVES/XRSTORS, which is not feasible for performance reasons - Fix a variety of fuzzing WARNs all caused by checking L1 intercepts when completing userspace I/O. KVM has already committed to allowing L2 to to perform I/O at that point - Emulate PERF_CNTR_GLOBAL_STATUS_SET for PerfMonV2 guests, as the MSR is supposed to exist for v2 PMUs - Allow Centaur CPU leaves (base 0xC000_0000) for Zhaoxin CPUs - Add support for the immediate forms of RDMSR and WRMSRNS, sans full emulator support (KVM should never need to emulate the MSRs outside of forced emulation and other contrived testing scenarios) - Clean up the MSR APIs in preparation for CET and FRED virtualization, as well as mediated vPMU support - Clean up a pile of PMU code in anticipation of adding support for mediated vPMUs - Reject in-kernel IOAPIC/PIT for TDX VMs, as KVM can't obtain EOI vmexits needed to faithfully emulate an I/O APIC for such guests - Many cleanups and minor fixes - Recover possible NX huge pages within the TDP MMU under read lock to reduce guest jitter when restoring NX huge pages - Return -EAGAIN during prefault if userspace concurrently deletes/moves the relevant memslot, to fix an issue where prefaulting could deadlock with the memslot update x86 (AMD): - Enable AVIC by default for Zen4+ if x2AVIC (and other prereqs) is supported - Require a minimum GHCB version of 2 when starting SEV-SNP guests via KVM_SEV_INIT2 so that invalid GHCB versions result in immediate errors instead of latent guest failures - Add support for SEV-SNP's CipherText Hiding, an opt-in feature that prevents unauthorized CPU accesses from reading the ciphertext of SNP guest private memory, e.g. to attempt an offline attack. This feature splits the shared SEV-ES/SEV-SNP ASID space into separate ranges for SEV-ES and SEV-SNP guests, therefore a new module parameter is needed to control the number of ASIDs that can be used for VMs with CipherText Hiding vs. how many can be used to run SEV-ES guests - Add support for Secure TSC for SEV-SNP guests, which prevents the untrusted host from tampering with the guest's TSC frequency, while still allowing the the VMM to configure the guest's TSC frequency prior to launch - Validate the XCR0 provided by the guest (via the GHCB) to avoid bugs resulting from bogus XCR0 values - Save an SEV guest's policy if and only if LAUNCH_START fully succeeds to avoid leaving behind stale state (thankfully not consumed in KVM) - Explicitly reject non-positive effective lengths during SNP's LAUNCH_UPDATE instead of subtly relying on guest_memfd to deal with them - Reload the pre-VMRUN TSC_AUX on #VMEXIT for SEV-ES guests, not the host's desired TSC_AUX, to fix a bug where KVM was keeping a different vCPU's TSC_AUX in the host MSR until return to userspace KVM (Intel): - Preparation for FRED support - Don't retry in TDX's anti-zero-step mitigation if the target memslot is invalid, i.e. is being deleted or moved, to fix a deadlock scenario similar to the aforementioned prefaulting case - Misc bugfixes and minor cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (142 commits) KVM: x86: Export KVM-internal symbols for sub-modules only KVM: x86: Drop pointless exports of kvm_arch_xxx() hooks KVM: x86: Move kvm_intr_is_single_vcpu() to lapic.c KVM: Export KVM-internal symbols for sub-modules only KVM: s390/vfio-ap: Use kvm_is_gpa_in_memslot() instead of open coded equivalent KVM: VMX: Make CR4.CET a guest owned bit KVM: selftests: Verify MSRs are (not) in save/restore list when (un)supported KVM: selftests: Add coverage for KVM-defined registers in MSRs test KVM: selftests: Add KVM_{G,S}ET_ONE_REG coverage to MSRs test KVM: selftests: Extend MSRs test to validate vCPUs without supported features KVM: selftests: Add support for MSR_IA32_{S,U}_CET to MSRs test KVM: selftests: Add an MSR test to exercise guest/host and read/write KVM: x86: Define AMD's #HV, #VC, and #SX exception vectors KVM: x86: Define Control Protection Exception (#CP) vector KVM: x86: Add human friendly formatting for #XM, and #VE KVM: SVM: Enable shadow stack virtualization for SVM KVM: SEV: Synchronize MSR_IA32_XSS from the GHCB when it's valid KVM: SVM: Pass through shadow stack MSRs as appropriate KVM: SVM: Update dump_vmcb with shadow stack save area additions KVM: nSVM: Save/load CET Shadow Stack state to/from vmcb12/vmcb02 ...

Merge tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2025-10-03T01:18:33+00:00

Pull MM updates from Andrew Morton: - "mm, swap: improve cluster scan strategy" from Kairui Song improves performance and reduces the failure rate of swap cluster allocation - "support large align and nid in Rust allocators" from Vitaly Wool permits Rust allocators to set NUMA node and large alignment when perforning slub and vmalloc reallocs - "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend DAMOS_STAT's handling of the DAMON operations sets for virtual address spaces for ops-level DAMOS filters - "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren Baghdasaryan reduces mmap_lock contention during reads of /proc/pid/maps - "mm/mincore: minor clean up for swap cache checking" from Kairui Song performs some cleanup in the swap code - "mm: vm_normal_page*() improvements" from David Hildenbrand provides code cleanup in the pagemap code - "add persistent huge zero folio support" from Pankaj Raghav provides a block layer speedup by optionalls making the huge_zero_pagepersistent, instead of releasing it when its refcount falls to zero - "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to the recently added Kexec Handover feature - "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo Stoakes turns mm_struct.flags into a bitmap. To end the constant struggle with space shortage on 32-bit conflicting with 64-bit's needs - "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap code - "selftests/mm: Fix false positives and skip unsupported tests" from Donet Tom fixes a few things in our selftests code - "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised" from David Hildenbrand "allows individual processes to opt-out of THP=always into THP=madvise, without affecting other workloads on the system". It's a long story - the [1/N] changelog spells out the considerations - "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on the memdesc project. Please see https://kernelnewbies.org/MatthewWilcox/Memdescs and https://blogs.oracle.com/linux/post/introducing-memdesc - "Tiny optimization for large read operations" from Chi Zhiling improves the efficiency of the pagecache read path - "Better split_huge_page_test result check" from Zi Yan improves our folio splitting selftest code - "test that rmap behaves as expected" from Wei Yang adds some rmap selftests - "remove write_cache_pages()" from Christoph Hellwig removes that function and converts its two remaining callers - "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD selftests issues - "introduce kernel file mapped folios" from Boris Burkov introduces the concept of "kernel file pages". Using these permits btrfs to account its metadata pages to the root cgroup, rather than to the cgroups of random inappropriate tasks - "mm/pageblock: improve readability of some pageblock handling" from Wei Yang provides some readability improvements to the page allocator code - "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON to understand arm32 highmem - "tools: testing: Use existing atomic.h for vma/maple tests" from Brendan Jackman performs some code cleanups and deduplication under tools/testing/ - "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes a couple of 32-bit issues in tools/testing/radix-tree.c - "kasan: unify kasan_enabled() and remove arch-specific implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific initialization code into a common arch-neutral implementation - "mm: remove zpool" from Johannes Weiner removes zspool - an indirection layer which now only redirects to a single thing (zsmalloc) - "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a couple of cleanups in the fork code - "mm: remove nth_page()" from David Hildenbrand makes rather a lot of adjustments at various nth_page() callsites, eventually permitting the removal of that undesirable helper function - "introduce kasan.write_only option in hw-tags" from Yeoreum Yun creates a KASAN read-only mode for ARM, using that architecture's memory tagging feature. It is felt that a read-only mode KASAN is suitable for use in production systems rather than debug-only - "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does some tidying in the hugetlb folio allocation code - "mm: establish const-correctness for pointer parameters" from Max Kellermann makes quite a number of the MM API functions more accurate about the constness of their arguments. This was getting in the way of subsystems (in this case CEPH) when they attempt to improving their own const/non-const accuracy - "Cleanup free_pages() misuse" from Vishal Moola fixes a number of code sites which were confused over when to use free_pages() vs __free_pages() - "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the mapletree code accessible to Rust. Required by nouveau and by its forthcoming successor: the new Rust Nova driver - "selftests/mm: split_huge_page_test: split_pte_mapped_thp improvements" from David Hildenbrand adds a fix and some cleanups to the thp selftesting code - "mm, swap: introduce swap table as swap cache (phase I)" from Chris Li and Kairui Song is the first step along the path to implementing "swap tables" - a new approach to swap allocation and state tracking which is expected to yield speed and space improvements. This patchset itself yields a 5-20% performance benefit in some situations - "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc layer to clean up the ptdesc code a little - "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some issues in our 5-level pagetable selftesting code - "Minor fixes for memory allocation profiling" from Suren Baghdasaryan addresses a couple of minor issues in relatively new memory allocation profiling feature - "Small cleanups" from Matthew Wilcox has a few cleanups in preparation for more memdesc work - "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from Quanmin Yan makes some changes to DAMON in furtherance of supporting arm highmem - "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad Anjum adds that compiler check to selftests code and fixes the fallout, by removing dead code - "Improvements to Victim Process Thawing and OOM Reaper Traversal Order" from zhongjinji makes a number of improvements in the OOM killer: mainly thawing a more appropriate group of victim threads so they can release resources - "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park is a bunch of small and unrelated fixups for DAMON - "mm/damon: define and use DAMON initialization check function" from SeongJae Park implement reliability and maintainability improvements to a recently-added bug fix - "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from SeongJae Park provides additional transparency to userspace clients of the DAMON_STAT information - "Expand scope of khugepaged anonymous collapse" from Dev Jain removes some constraints on khubepaged's collapsing of anon VMAs. It also increases the success rate of MADV_COLLAPSE against an anon vma - "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()" from Lorenzo Stoakes moves us further towards removal of file_operations.mmap(). This patchset concentrates upon clearing up the treatment of stacked filesystems - "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau provides some fixes and improvements to mlock's tracking of large folios. /proc/meminfo's "Mlocked" field became more accurate - "mm/ksm: Fix incorrect accounting of KSM counters during fork" from Donet Tom fixes several user-visible KSM stats inaccuracies across forks and adds selftest code to verify these counters - "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses some potential but presently benign issues in KSM's mm_slot handling * tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits) mm: swap: check for stable address space before operating on the VMA mm: convert folio_page() back to a macro mm/khugepaged: use start_addr/addr for improved readability hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list alloc_tag: fix boot failure due to NULL pointer dereference mm: silence data-race in update_hiwater_rss mm/memory-failure: don't select MEMORY_ISOLATION mm/khugepaged: remove definition of struct khugepaged_mm_slot mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL hugetlb: increase number of reserving hugepages via cmdline selftests/mm: add fork inheritance test for ksm_merging_pages counter mm/ksm: fix incorrect KSM counter handling in mm_struct during fork drivers/base/node: fix double free in register_one_node() mm: remove PMD alignment constraint in execmem_vmalloc() mm/memory_hotplug: fix typo 'esecially' -> 'especially' mm/rmap: improve mlock tracking for large folios mm/filemap: map entire large folio faultaround mm/fault: try to map the entire file folio in finish_fault() mm/rmap: mlock large folios in try_to_unmap_one() mm/rmap: fix a mlock race condition in folio_referenced_one() ...

Merge tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

2025-10-02T17:16:56+00:00

Pull block updates from Jens Axboe: - NVMe pull request via Keith: - FC target fixes (Daniel) - Authentication fixes and updates (Martin, Chris) - Admin controller handling (Kamaljit) - Target lockdep assertions (Max) - Keep-alive updates for discovery (Alastair) - Suspend quirk (Georg) - MD pull request via Yu: - Add support for a lockless bitmap. A key feature for the new bitmap are that the IO fastpath is lockless. If a user issues lots of write IO to the same bitmap bit in a short time, only the first write has additional overhead to update bitmap bit, no additional overhead for the following writes. By supporting only resync or recover written data, means in the case creating new array or replacing with a new disk, there is no need to do a full disk resync/recovery. - Switch ->getgeo() and ->bios_param() to using struct gendisk rather than struct block_device. - Rust block changes via Andreas. This series adds configuration via configfs and remote completion to the rnull driver. The series also includes a set of changes to the rust block device driver API: a few cleanup patches, and a few features supporting the rnull changes. The series removes the raw buffer formatting logic from `kernel::block` and improves the logic available in `kernel::string` to support the same use as the removed logic. - floppy arch cleanups - Reduce the number of dereferencing needed for ublk commands - Restrict supported sockets for nbd. Mostly done to eliminate a class of issues perpetually reported by syzbot, by using nonsensical socket setups. - A few s390 dasd block fixes - Fix a few issues around atomic writes - Improve DMA interation for integrity requests - Improve how iovecs are treated with regards to O_DIRECT aligment constraints. We used to require each segment to adhere to the constraints, now only the request as a whole needs to. - Clean up and improve p2p support, enabling use of p2p for metadata payloads - Improve locking of request lookup, using SRCU where appropriate - Use page references properly for brd, avoiding very long RCU sections - Fix ordering of recursively submitted IOs - Clean up and improve updating nr_requests for a live device - Various fixes and cleanups * tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits) s390/dasd: enforce dma_alignment to ensure proper buffer validation s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request ublk: remove redundant zone op check in ublk_setup_iod() nvme: Use non zero KATO for persistent discovery connections nvmet: add safety check for subsys lock nvme-core: use nvme_is_io_ctrl() for I/O controller check nvme-core: do ioccsz/iorcsz validation only for I/O controllers nvme-core: add method to check for an I/O controller blk-cgroup: fix possible deadlock while configuring policy blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path blk-mq: Fix more tag iteration function documentation selftests: ublk: fix behavior when fio is not installed ublk: don't access ublk_queue in ublk_unmap_io() ublk: pass ublk_io to __ublk_complete_rq() ublk: don't access ublk_queue in ublk_need_complete_req() ublk: don't access ublk_queue in ublk_check_commit_and_fetch() ublk: don't pass ublk_queue to ublk_fetch() ublk: don't access ublk_queue in ublk_config_io_buf() ublk: don't access ublk_queue in ublk_check_fetch_buf() ublk: pass q_id and tag to __ublk_check_and_get_req() ...

Merge tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux

2025-10-02T03:58:51+00:00

Pull Kbuild updates from Nathan Chancellor: - Extend modules.builtin.modinfo to include module aliases from MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such as kmod) can verify that a particular module alias will be handled by a builtin module - Bump the minimum version of LLVM for building the kernel to 15.0.0 - Upgrade several userspace API checks in headers_check.pl to errors - Unify and consolidate CONFIG_WERROR / W=e handling - Turn assembler and linker warnings into errors with CONFIG_WERROR / W=e - Respect CONFIG_WERROR / W=e when building userspace programs (userprogs) - Enable -Werror unconditionally when building host programs (hostprogs) - Support copy_file_range() and data segment alignment in gen_init_cpio to improve performance on filesystems that support reflinks such as btrfs and XFS - Miscellaneous small changes to scripts and configuration files * tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (47 commits) modpost: Initialize builtin_modname to stop SIGSEGVs Documentation: kbuild: note CONFIG_DEBUG_EFI in reproducible builds kbuild: vmlinux.unstripped should always depend on .vmlinux.export.o modpost: Create modalias for builtin modules modpost: Add modname to mod_device_table alias scsi: Always define blogic_pci_tbl structure kbuild: extract modules.builtin.modinfo from vmlinux.unstripped kbuild: keep .modinfo section in vmlinux.unstripped kbuild: always create intermediate vmlinux.unstripped s390: vmlinux.lds.S: Reorder sections KMSAN: Remove tautological checks objtool: Drop noinstr hack for KCSAN_WEAK_MEMORY lib/Kconfig.debug: Drop CLANG_VERSION check from DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT riscv: Remove ld.lld version checks from many TOOLCHAIN_HAS configs riscv: Unconditionally use linker relaxation riscv: Remove version check for LTO_CLANG selects powerpc: Drop unnecessary initializations in __copy_inst_from_kernel_nofault() mips: Unconditionally select ARCH_HAS_CURRENT_STACK_POINTER arm64: Remove tautological LLVM Kconfig conditions ARM: Clean up definition of ARM_HAS_GROUP_RELOCS ...