kernel/linux.git/arch/powerpc/include/asm/kvm_ppc.h, branch linux-4.16.y

Merge tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2018-02-10T21:16:35+00:00

Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ...

KVM: PPC: Book3S: Add MMIO emulation for VMX instructions

2018-02-09T05:51:51+00:00

This patch provides the MMIO load/store vector indexed X-Form emulation. Instructions implemented: lvx: the quadword in storage addressed by the result of EA & 0xffff_ffff_ffff_fff0 is loaded into VRT. stvx: the contents of VRS are stored into the quadword in storage addressed by the result of EA & 0xffff_ffff_ffff_fff0. Reported-by: Gopesh Kumar Chaudhary Reported-by: Balamuruhan S Signed-off-by: Jose Ricardo Ziviani Signed-off-by: Paul Mackerras

powerpc/64: Rename soft_enabled to irq_soft_mask

2018-01-19T11:37:01+00:00

Rename the paca->soft_enabled to paca->irq_soft_mask as it is no longer used as a flag for interrupt state, but a mask. Signed-off-by: Madhavan Srinivasan Signed-off-by: Michael Ellerman

powerpc/64: Move set_soft_enabled() and rename

2018-01-19T11:36:58+00:00

Move set_soft_enabled() from powerpc/kernel/irq.c to asm/hw_irq.c, to encourage updates to paca->soft_enabled done via these access function. Add "memory" clobber to hint compiler since paca->soft_enabled memory is the target here. Renaming it as soft_enabled_set() will make namespaces works better as prefix than a postfix when new soft_enabled manipulation functions are introduced. Reviewed-by: Nicholas Piggin Signed-off-by: Madhavan Srinivasan Signed-off-by: Michael Ellerman

powerpc/64: Add #defines for paca->soft_enabled flags

2018-01-19T11:36:56+00:00

Two #defines IRQS_ENABLED and IRQS_DISABLED are added to be used when updating paca->soft_enabled. Replace the hardcoded values used when updating paca->soft_enabled with IRQ_(EN|DIS)ABLED #define. No logic change. Reviewed-by: Nicholas Piggin Signed-off-by: Madhavan Srinivasan Signed-off-by: Michael Ellerman

KVM: PPC: Book3S HV: Fix migration and HPT resizing of HPT guests on radix hosts

2017-11-23T03:17:54+00:00

This fixes two errors that prevent a guest using the HPT MMU from successfully migrating to a POWER9 host in radix MMU mode, or resizing its HPT when running on a radix host. The first bug was that commit 8dc6cca556e4 ("KVM: PPC: Book3S HV: Don't rely on host's page size information", 2017-09-11) missed two uses of hpte_base_page_size(), one in the HPT rehashing code and one in kvm_htab_write() (which is used on the destination side in migrating a HPT guest). Instead we use kvmppc_hpte_base_page_shift(). Having the shift count means that we can use left and right shifts instead of multiplication and division in a few places. Along the way, this adds a check in kvm_htab_write() to ensure that the page size encoding in the incoming HPTEs is recognized, and if not return an EINVAL error to userspace. The second bug was that kvm_htab_write was performing some but not all of the functions of kvmhv_setup_mmu(), resulting in the destination VM being left in radix mode as far as the hardware is concerned. The simplest fix for now is make kvm_htab_write() call kvmppc_setup_partition_table() like kvmppc_hv_setup_htab_rma() does. In future it would be better to refactor the code more extensively to remove the duplication. Fixes: 8dc6cca556e4 ("KVM: PPC: Book3S HV: Don't rely on host's page size information") Fixes: 7a84084c6054 ("KVM: PPC: Book3S HV: Set partition table rather than SDR1 on POWER9") Reported-by: Suraj Jitindar Singh Tested-by: Suraj Jitindar Singh Signed-off-by: Paul Mackerras

KVM: PPC: Book3S HV: Add infrastructure for running HPT guests on radix host

2017-11-01T04:36:28+00:00

This sets up the machinery for switching a guest between HPT (hashed page table) and radix MMU modes, so that in future we can run a HPT guest on a radix host on POWER9 machines. * The KVM_PPC_CONFIGURE_V3_MMU ioctl can now specify either HPT or radix mode, on a radix host. * The KVM_CAP_PPC_MMU_HASH_V3 capability now returns 1 on POWER9 with HV KVM on a radix host. * The KVM_PPC_GET_SMMU_INFO returns information about the HPT MMU on a radix host. * The KVM_PPC_ALLOCATE_HTAB ioctl on a radix host will switch the guest to HPT mode and allocate a HPT. * For simplicity, we now allocate the rmap array for each memslot, even on a radix host, since it will be needed if the guest switches to HPT mode. * Since we cannot yet run a HPT guest on a radix host, the KVM_RUN ioctl will return an EINVAL error in that case. Signed-off-by: Paul Mackerras

KVM: PPC: Book3S HV: Allow userspace to set the desired SMT mode

2017-06-19T04:34:20+00:00

This allows userspace to set the desired virtual SMT (simultaneous multithreading) mode for a VM, that is, the number of VCPUs that get assigned to each virtual core. Previously, the virtual SMT mode was fixed to the number of threads per subcore, and if userspace wanted to have fewer vcpus per vcore, then it would achieve that by using a sparse CPU numbering. This had the disadvantage that the vcpu numbers can get quite large, particularly for SMT1 guests on a POWER8 with 8 threads per core. With this patch, userspace can set its desired virtual SMT mode and then use contiguous vcpu numbering. On POWER8, where the threading mode is "strict", the virtual SMT mode must be less than or equal to the number of threads per subcore. On POWER9, which implements a "loose" threading mode, the virtual SMT mode can be any power of 2 between 1 and 8, even though there is effectively one thread per subcore, since the threads are independent and can all be in different partitions. Signed-off-by: Paul Mackerras

Merge remote-tracking branch 'remotes/powerpc/topic/xive' into kvm-ppc-next

2017-04-27T22:23:16+00:00

This merges in the powerpc topic/xive branch to bring in the code for the in-kernel XICS interrupt controller emulation to use the new XIVE (eXternal Interrupt Virtualization Engine) hardware in the POWER9 chip directly, rather than via a XICS emulation in firmware. Signed-off-by: Paul Mackerras

KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller

2017-04-27T11:37:29+00:00

This patch makes KVM capable of using the XIVE interrupt controller to provide the standard PAPR "XICS" style hypercalls. It is necessary for proper operations when the host uses XIVE natively. This has been lightly tested on an actual system, including PCI pass-through with a TG3 device. Signed-off-by: Benjamin Herrenschmidt [mpe: Cleanup pr_xxx(), unsplit pr_xxx() strings, etc., fix build failures by adding KVM_XIVE which depends on KVM_XICS and XIVE, and adding empty stubs for the kvm_xive_xxx() routines, fixup subject, integrate fixes from Paul for building PR=y HV=n] Signed-off-by: Michael Ellerman