kernel/linux.git/arch/powerpc/include/asm/irq.h, branch linux-4.4.y

powerpc: Remove stale function prototypes

2014-09-25T13:14:43+00:00

There were a number of prototypes for functions that no longer exist. Remove them. Signed-off-by: Anton Blanchard Signed-off-by: Michael Ellerman

powerpc/irq: Run softirqs off the top of the irq stack

2013-09-25T04:15:36+00:00

Nowadays, irq_exit() calls __do_softirq() pretty much directly instead of calling do_softirq() which switches to the decicated softirq stack. This has lead to observed stack overflows on powerpc since we call irq_enter() and irq_exit() outside of the scope that switches to the irq stack. This fixes it by moving the stack switching up a level, making irq_enter() and irq_exit() run off the irq stack. Signed-off-by: Benjamin Herrenschmidt

powerpc/irqdomain: Fix broken NR_IRQ references

2012-04-30T00:45:26+00:00

The switch from using irq_map to irq_alloc_desc*() for managing irq number allocations introduced new bugs in some of the powerpc interrupt code. Several functions rely on the value of NR_IRQS to determine the maximum irq number that could get allocated. However, with sparse_irq and using irq_alloc_desc*() the maximum possible irq number is now specified with 'nr_irqs' which may be a number larger than NR_IRQS. This has caused breakage on powermac when CONFIG_NR_IRQS is set to 32. This patch removes most of the direct references to NR_IRQS in the powerpc code and replaces them with either a nr_irqs reference or by using the common for_each_irq_desc() macro. The powerpc-specific for_each_irq() macro is removed at the same time. Also, the Cell axon_msi driver is refactored to remove the global build assumption on the size of NR_IRQS and instead add a limit to the maximum irq number when calling irq_domain_add_nomap(). Signed-off-by: Grant Likely Signed-off-by: Benjamin Herrenschmidt

irq: Kill pointless irqd_to_hw export

2012-04-11T04:39:17+00:00

It makes no sense to export this trivial function. Make it a static inline instead. This patch also drops virq_to_hw from arch/c6x since it is unused by that architecture. v2: Move irq_hw_number_t into types.h to fix ARM build failure Signed-off-by: Grant Likely Acked-by: Thomas Gleixner Cc: Benjamin Herrenschmidt

powerpc: Remove NO_IRQ_IGNORE

2012-03-28T00:32:01+00:00

Now that legacy iSeries is gone, this is no longer used. Signed-off-by: Stephen Rothwell Signed-off-by: Benjamin Herrenschmidt

irq_domain: Add support for base irq and hwirq in legacy mappings

2012-02-16T13:11:23+00:00

Add support for a legacy mapping where irq = (hwirq - first_hwirq + first_irq) so that a controller driver can allocate a fixed range of irq_descs and use a simple calculation to translate back and forth between linux and hw irq numbers. This is needed to use an irq_domain with many of the ARM interrupt controller drivers that manage their own irq_desc allocations. Ultimately the goal is to migrate those drivers to use the linear revmap, but doing it this way allows each driver to be converted separately which makes the migration path easier. This patch generalizes the IRQ_DOMAIN_MAP_LEGACY method to use (first_irq-first_hwirq) as the offset between hwirq and linux irq number, and adds checks to make sure that the hwirq number does not exceed range assigned to the controller. Signed-off-by: Grant Likely Cc: Rob Herring Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Milton Miller Tested-by: Olof Johansson

irq_domain: Move irq_domain code from powerpc to kernel/irq

2012-02-16T08:37:49+00:00

This patch only moves the code. It doesn't make any changes, and the code is still only compiled for powerpc. Follow-on patches will generalize the code for other architectures. Signed-off-by: Grant Likely Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Milton Miller Tested-by: Olof Johansson

irq_domain/powerpc: Eliminate virq_is_host()

2012-02-16T08:36:46+00:00

There is only one user, and it is trivial to open-code. Signed-off-by: Grant Likely Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Milton Miller Tested-by: Olof Johansson

irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead

2012-02-14T21:06:51+00:00

This patch drops the powerpc-specific irq_map table and replaces it with directly using the irq_alloc_desc()/irq_free_desc() interfaces for allocating and freeing irq_desc structures. This patch is a preparation step for generalizing the powerpc-specific virq infrastructure to become irq_domains. As part of this change, the irq_big_lock is changed to a mutex from a raw spinlock. There is no longer any need to use a spin lock since the irq_desc allocation code is now responsible for the critical section of finding an unused range of irq numbers. The radix lookup table is also changed to store the irq_data pointer instead of the irq_map entry since the irq_map is removed. This should end up being functionally equivalent since only allocated irq_descs are ever added to the radix tree. v5: - Really don't ever allocate virq 0. The previous version could still do it if hint == 0 - Respect irq_virq_count setting for NOMAP. Some NOMAP domains cannot use virq values above irq_virq_count. - Use numa_node_id() when allocating irq_descs. Ideally the API should obtain that value from the caller, but that touches a lot of call sites so will be deferred to a follow-on patch. - Fix irq_find_mapping() to include irq numbers lower than NUM_ISA_INTERRUPTS. With the switch to irq_alloc_desc*(), the lowest possible allocated irq is now returned by arch_probe_nr_irqs(). v4: - Fix incorrect access to irq_data structure in debugfs code - Don't ever allocate virq 0 Signed-off-by: Grant Likely Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Milton Miller Tested-by: Olof Johansson

irq_domain/powerpc: Use common irq_domain structure instead of irq_host

2012-02-14T21:06:50+00:00

This patch drops the powerpc-specific irq_host structures and uses the common irq_domain strucutres defined in linux/irqdomain.h. It also fixes all the users to use the new structure names. Renaming irq_host to irq_domain has been discussed for a long time, and this patch is a step in the process of generalizing the powerpc virq code to be usable by all architecture. An astute reader will notice that this patch actually removes the irq_host structure instead of renaming it. This is because the irq_domain structure already exists in include/linux/irqdomain.h and has the needed data members. Signed-off-by: Grant Likely Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Milton Miller Tested-by: Olof Johansson