kernel/linux.git/arch/parisc/include/asm, branch v6.1.168

parisc: Increase initial mapping to 64 MB with KALLSYMS

2026-03-25T10:03:09+00:00

commit 8e732934fb81282be41602550e7e07baf265e972 upstream. The 32MB initial kernel mapping can become too small when CONFIG_KALLSYMS is used. Increase the mapping to 64 MB in this case. Signed-off-by: Helge Deller Cc: # v6.0+ Signed-off-by: Greg Kroah-Hartman

parisc: Revise __get_user() to probe user read access

2025-08-28T14:26:08+00:00

commit 89f686a0fb6e473a876a9a60a13aec67a62b9a7e upstream. Because of the way read access support is implemented, read access interruptions are only triggered at privilege levels 2 and 3. The kernel executes at privilege level 0, so __get_user() never triggers a read access interruption (code 26). Thus, it is currently possible for user code to access a read protected address via a system call. Fix this by probing read access rights at privilege level 3 (PRIV_USER) and setting __gu_err to -EFAULT (-14) if access isn't allowed. Note the cmpiclr instruction does a 32-bit compare because COND macro doesn't work inside asm. Signed-off-by: John David Anglin Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # v5.12+ Signed-off-by: Greg Kroah-Hartman

parisc: Check region is readable by user in raw_copy_from_user()

2025-08-28T14:26:08+00:00

commit 91428ca9320edbab1211851d82429d33b9cd73ef upstream. Because of the way the _PAGE_READ is handled in the parisc PTE, an access interruption is not generated when the kernel reads from a region where the _PAGE_READ is zero. The current code was written assuming read access faults would also occur in the kernel. This change adds user access checks to raw_copy_from_user(). The prober_user() define checks whether user code has read access to a virtual address. Note that page faults are not handled in the exception support for the probe instruction. For this reason, we precede the probe by a ldb access check. Signed-off-by: John David Anglin Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # v5.12+ Signed-off-by: Greg Kroah-Hartman

parisc: fix a possible DMA corruption

2024-11-22T14:37:35+00:00

commit 7ae04ba36b381bffe2471eff3a93edced843240f upstream. ARCH_DMA_MINALIGN was defined as 16 - this is too small - it may be possible that two unrelated 16-byte allocations share a cache line. If one of these allocations is written using DMA and the other is written using cached write, the value that was written with DMA may be corrupted. This commit changes ARCH_DMA_MINALIGN to be 128 on PA20 and 32 on PA1.1 - that's the largest possible cache line size. As different parisc microarchitectures have different cache line size, we define arch_slab_minalign(), cache_line_size() and dma_get_cache_alignment() so that the kernel may tune slab cache parameters dynamically, based on the detected cache line size. Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Bin Lan Signed-off-by: Greg Kroah-Hartman

mm: remove kern_addr_valid() completely

2024-11-08T15:26:39+00:00

[ Upstream commit e025ab842ec35225b1a8e163d1f311beb9e38ce9 ] Most architectures (except arm64/x86/sparc) simply return 1 for kern_addr_valid(), which is only used in read_kcore(), and it calls copy_from_kernel_nofault() which could check whether the address is a valid kernel address. So as there is no need for kern_addr_valid(), let's remove it. Link: https://lkml.kernel.org/r/20221018074014.185687-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang Acked-by: Geert Uytterhoeven [m68k] Acked-by: Heiko Carstens [s390] Acked-by: Christoph Hellwig Acked-by: Helge Deller [parisc] Acked-by: Michael Ellerman [powerpc] Acked-by: Guo Ren [csky] Acked-by: Catalin Marinas [arm64] Cc: Alexander Gordeev Cc: Andy Lutomirski Cc: Anton Ivanov Cc: Cc: Borislav Petkov Cc: Christian Borntraeger Cc: Christophe Leroy Cc: Chris Zankel Cc: Dave Hansen Cc: David S. Miller Cc: Dinh Nguyen Cc: Greg Ungerer Cc: H. Peter Anvin Cc: Huacai Chen Cc: Ingo Molnar Cc: Ivan Kokshaysky Cc: James Bottomley Cc: Johannes Berg Cc: Jonas Bonn Cc: Matt Turner Cc: Max Filippov Cc: Michal Simek Cc: Nicholas Piggin Cc: Palmer Dabbelt Cc: Paul Walmsley Cc: Peter Zijlstra Cc: Richard Henderson Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Stefan Kristiansson Cc: Sven Schnelle Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Vasily Gorbik Cc: Vineet Gupta Cc: Will Deacon Cc: Xuerui Wang Cc: Yoshinori Sato Signed-off-by: Andrew Morton Stable-dep-of: 3d5854d75e31 ("fs/proc/kcore.c: allow translation of physical memory addresses") Signed-off-by: Sasha Levin

parisc: Define sigset_t in parisc uapi header

2024-06-16T11:41:41+00:00

commit 487fa28fa8b60417642ac58e8beda6e2509d18f9 upstream. The util-linux debian package fails to build on parisc, because sigset_t isn't defined in asm/signal.h when included from userspace. Move the sigset_t type from internal header to the uapi header to fix the build. Link: https://buildd.debian.org/status/fetch.php?pkg=util-linux&arch=hppa&ver=2.40-7&stamp=1714163443&raw=0 Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Greg Kroah-Hartman

parisc: Define HAVE_ARCH_HUGETLB_UNMAPPED_AREA

2024-06-16T11:41:40+00:00

commit d4a599910193b85f76c100e30d8551c8794f8c2a upstream. Define the HAVE_ARCH_HUGETLB_UNMAPPED_AREA macro like other platforms do in their page.h files to avoid this compile warning: arch/parisc/mm/hugetlbpage.c:25:1: warning: no previous prototype for 'hugetlb_get_unmapped_area' [-Wmissing-prototypes] Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # 6.0+ Reported-by: John David Anglin Tested-by: John David Anglin Signed-off-by: Greg Kroah-Hartman

parisc: Strip upper 32 bit of sum in csum_ipv6_magic for 64-bit builds

2024-04-03T13:19:28+00:00

[ Upstream commit 0568b6f0d863643db2edcc7be31165740c89fa82 ] IPv6 checksum tests with unaligned addresses on 64-bit builds result in unexpected failures. Expected expected == csum_result, but expected == 46591 (0xb5ff) csum_result == 46381 (0xb52d) with alignment offset 1 Oddly enough, the problem disappeared after adding test code into the beginning of csum_ipv6_magic(). As it turns out, the 'sum' parameter of csum_ipv6_magic() is declared as __wsum, which is a 32-bit variable. However, it is treated as 64-bit variable in the 64-bit assembler code. Tests showed that the upper 32 bit of the register used to pass the variable are _not_ cleared when entering the function. This can result in checksum calculation errors. Clearing the upper 32 bit of 'sum' as first operation in the assembler code fixes the problem. Acked-by: Helge Deller Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck Signed-off-by: Helge Deller Signed-off-by: Sasha Levin

parisc: Fix csum_ipv6_magic on 64-bit systems

2024-04-03T13:19:28+00:00

[ Upstream commit 4b75b12d70506e31fc02356bbca60f8d5ca012d0 ] hppa 64-bit systems calculates the IPv6 checksum using 64-bit add operations. The last add folds protocol and length fields into the 64-bit result. While unlikely, this operation can overflow. The overflow can be triggered with a code sequence such as the following. /* try to trigger massive overflows */ memset(tmp_buf, 0xff, sizeof(struct in6_addr)); csum_result = csum_ipv6_magic((struct in6_addr *)tmp_buf, (struct in6_addr *)tmp_buf, 0xffff, 0xff, 0xffffffff); Fix the problem by adding any overflows from the final add operation into the calculated checksum. Fortunately, we can do this without additional cost by replacing the add operation used to fold the checksum into 32 bit with "add,dc" to add in the missing carry. Cc: Palmer Dabbelt Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck Reviewed-by: Charlie Jenkins Tested-by: Guenter Roeck Signed-off-by: Helge Deller Signed-off-by: Sasha Levin

parisc: Fix csum_ipv6_magic on 32-bit systems

2024-04-03T13:19:28+00:00

[ Upstream commit 4408ba75e4ba80c91fde7e10bccccf388f5c09be ] Calculating the IPv6 checksum on 32-bit systems missed overflows when adding the proto+len fields into the checksum. This results in the following unit test failure. # test_csum_ipv6_magic: ASSERTION FAILED at lib/checksum_kunit.c:506 Expected ( u64)csum_result == ( u64)expected, but ( u64)csum_result == 46722 (0xb682) ( u64)expected == 46721 (0xb681) not ok 5 test_csum_ipv6_magic This is probably rarely seen in the real world because proto+len are usually small values which will rarely result in overflows when calculating the checksum. However, the unit test code uses large values for the length field, causing the test to fail. Fix the problem by adding the missing carry into the final checksum. Cc: Palmer Dabbelt Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck Tested-by: Charlie Jenkins Reviewed-by: Charlie Jenkins Signed-off-by: Helge Deller Signed-off-by: Sasha Levin