kernel/linux.git/arch/openrisc/include, branch v5.10.257

openrisc: define arch-specific version of nop()

2026-03-04T12:20:01+00:00

[ Upstream commit 0dfffa5479d6260d04d021f69203b1926f73d889 ] When compiling a driver written for MIPS on OpenRISC that uses the nop() function, it fails due to the following error: drivers/watchdog/pic32-wdt.c: Assembler messages: drivers/watchdog/pic32-wdt.c:125: Error: unrecognized instruction `nop' The driver currently uses the generic version of nop() from include/asm-generic/barrier.h: #ifndef nop #define nop() asm volatile ("nop") #endif Let's fix this on OpenRISC by defining an architecture-specific version of nop(). This was tested by performing an allmodconfig openrisc cross compile on an aarch64 host. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202601180236.BVy480We-lkp@intel.com/ Signed-off-by: Brian Masney Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin

openrisc: add support for TIF_NOTIFY_SIGNAL

2023-01-04T10:39:20+00:00

[ Upstream commit e181c0aa2e532af2b17128fbde699f8578cc0562 ] Wire up TIF_NOTIFY_SIGNAL handling for openrisc. Cc: openrisc@lists.librecores.org Acked-by: Stafford Horne Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

openrisc: start CPU timer early in boot

2022-06-09T08:20:55+00:00

[ Upstream commit 516dd4aacd67a0f27da94f3fe63fe0f4dbab6e2b ] In order to measure the boot process, the timer should be switched on as early in boot as possible. As well, the commit defines the get_cycles macro, like the previous patches in this series, so that generic code is aware that it's implemented by the platform, as is done on other archs. Cc: Thomas Gleixner Cc: Arnd Bergmann Cc: Jonas Bonn Cc: Stefan Kristiansson Acked-by: Stafford Horne Reported-by: Guenter Roeck Signed-off-by: Jason A. Donenfeld Signed-off-by: Sasha Levin

openrisc: Add clone3 ABI wrapper

2022-01-27T09:54:06+00:00

[ Upstream commit 433fe39f674d58bc7a3e8254a5d2ffc290b7e04e ] Like fork and clone the clone3 syscall needs a wrapper to save callee saved registers, which is required by the OpenRISC ABI. This came up after auditing code following a discussion with Rob Landley and Arnd Bergmann [0]. Tested with the clone3 kselftests and there were no issues. [0] https://lore.kernel.org/all/41206fc7-f8ce-98aa-3718-ba3e1431e320@landley.net/T/#m9c0cdb2703813b9df4da04cf6b30de1f1aa89944 Fixes: 07e83dfbe16c ("openrisc: Enable the clone3 syscall") Cc: Rob Landley Cc: Arnd Bergmann Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin

openrisc: Define memory barrier mb

2021-06-03T07:00:44+00:00

[ Upstream commit 8b549c18ae81dbc36fb11e4aa08b8378c599ca95 ] This came up in the discussion of the requirements of qspinlock on an architecture. OpenRISC uses qspinlock, but it was noticed that the memmory barrier was not defined. Peter defined it in the mail thread writing: As near as I can tell this should do. The arch spec only lists this one instruction and the text makes it sound like a completion barrier. This is correct so applying this patch. Signed-off-by: Peter Zijlstra [shorne@gmail.com:Turned the mail into a patch] Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin

openrisc: Fix issue with get_user for 64-bit values

2020-09-12T08:26:00+00:00

A build failure was raised by kbuild with the following error. drivers/android/binder.c: Assembler messages: drivers/android/binder.c:3861: Error: unrecognized keyword/register name `l.lwz ?ap,4(r24)' drivers/android/binder.c:3866: Error: unrecognized keyword/register name `l.addi ?ap,r0,0' The issue is with 64-bit get_user() calls on openrisc. I traced this to a problem where in the internally in the get_user macros there is a cast to long __gu_val this causes GCC to think the get_user call is 32-bit. This binder code is really long and GCC allocates register r30, which triggers the issue. The 64-bit get_user asm tries to get the 64-bit pair register, which for r30 overflows the general register names and returns the dummy register ?ap. The fix here is to move the temporary variables into the asm macros. We use a 32-bit __gu_tmp for 32-bit and smaller macro and a 64-bit tmp in the 64-bit macro. The cast in the 64-bit macro has a trick of casting through __typeof__((x)-(x)) which avoids the below warning. This was barrowed from riscv. arch/openrisc/include/asm/uaccess.h:240:8: warning: cast to pointer from integer of different size I tested this in a small unit test to check reading between 64-bit and 32-bit pointers to 64-bit and 32-bit values in all combinations. Also I ran make C=1 to confirm no new sparse warnings came up. It all looks clean to me. Link: https://lore.kernel.org/lkml/202008200453.ohnhqkjQ%25lkp@intel.com/ Signed-off-by: Stafford Horne Reviewed-by: Luc Van Oostenryck

Merge tag 'for-linus' of git://github.com/openrisc/linux

2020-08-14T21:04:53+00:00

Pull OpenRISC updates from Stafford Horne: "A few patches all over the place during this cycle, mostly bug and sparse warning fixes for OpenRISC, but a few enhancements too. Note, there are 2 non OpenRISC specific fixups. Non OpenRISC fixes: - In init we need to align the init_task correctly to fix an issue with MUTEX_FLAGS, reviewed by Peter Z. No one picked this up so I kept it on my tree. - In asm-generic/io.h I fixed up some sparse warnings, OK'd by Arnd. Arnd asked to merge it via my tree. OpenRISC fixes: - Many fixes for OpenRISC sprase warnings. - Add support OpenRISC SMP tlb flushing rather than always flushing the entire TLB on every CPU. - Fix bug when dumping stack via /proc/xxx/stack of user threads" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: uaccess: Add user address space check to access_ok openrisc: signal: Fix sparse address space warnings openrisc: uaccess: Remove unused macro __addr_ok openrisc: uaccess: Use static inline function in access_ok openrisc: uaccess: Fix sparse address space warnings openrisc: io: Fixup defines and move include to the end asm-generic/io.h: Fix sparse warnings on big-endian architectures openrisc: Implement proper SMP tlb flushing openrisc: Fix oops caused when dumping stack openrisc: Add support for external initrd images init: Align init_task to avoid conflict with MUTEX_FLAGS openrisc: fix __user in raw_copy_to_user()'s prototype

uaccess: remove segment_eq

2020-08-12T17:57:58+00:00

segment_eq is only used to implement uaccess_kernel. Just open code uaccess_kernel in the arch uaccess headers and remove one layer of indirection. Signed-off-by: Christoph Hellwig Signed-off-by: Andrew Morton Acked-by: Linus Torvalds Acked-by: Greentime Hu Acked-by: Geert Uytterhoeven Cc: Nick Hu Cc: Vincent Chen Cc: Paul Walmsley Cc: Palmer Dabbelt Link: http://lkml.kernel.org/r/20200710135706.537715-5-hch@lst.de Signed-off-by: Linus Torvalds

openrisc: uaccess: Add user address space check to access_ok

2020-08-08T22:57:21+00:00

Now that __user annotations are fixed for openrisc uaccess api's we can add checking to the access_ok macro. This patch adds the __chk_user_ptr check, on normal builds the added check is a nop. Signed-off-by: Stafford Horne Reviewed-by: Luc Van Oostenryck

openrisc: uaccess: Remove unused macro __addr_ok

2020-08-08T22:57:09+00:00

Since commit b48b2c3e5043 ("openrisc: use generic strnlen_user() function") the macro __addr_ok is no longer used. It is safe to remove so this patch removes it. Signed-off-by: Stafford Horne