kernel/linux.git/arch/mips/netlogic, branch linux-5.9.y

MIPS: Only include the platform file needed

2020-05-12T22:17:18+00:00

Instead of including all Platform files, we simply include the needed one and avoid clashes with makefile variables. Signed-off-by: Thomas Bogendoerfer

MIPS: Netlogic: remove unneeded semicolon in fmn_message_handler()

2020-04-19T14:05:19+00:00

Fix the following coccicheck warning: arch/mips/netlogic/xlr/fmn.c:106:2-3: Unneeded semicolon Reported-by: Hulk Robot Signed-off-by: Jason Yan Signed-off-by: Thomas Bogendoerfer

MIPS: Replace setup_irq() by request_irq()

2020-03-05T15:47:35+00:00

request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). remove_irq() has been replaced by free_irq() as well. There were build error's during previous version, couple of which was reported by kbuild test robot of which one was reported by Thomas Bogendoerfer as well. There were a few more issues including build errors, those also have been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed Signed-off-by: Thomas Bogendoerfer

MIPS: xlp: Drop boot_mem_map

2019-08-23T13:47:21+00:00

Simply replace with memblock functions. Signed-off-by: Jiaxun Yang Signed-off-by: Paul Burton Cc: linux-mips@vger.kernel.org Cc: yasha.che3@gmail.com Cc: aurelien@aurel32.net Cc: sfr@canb.auug.org.au Cc: fancer.lancer@gmail.com Cc: matt.redfearn@mips.com Cc: chenhc@lemote.com

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

mm: remove include/linux/bootmem.h

2018-10-31T15:54:16+00:00

Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include @@ @@ - #include + #include [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport Signed-off-by: Stephen Rothwell Acked-by: Michal Hocko Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Kroah-Hartman Cc: Guan Xuetao Cc: Ingo Molnar Cc: "James E.J. Bottomley" Cc: Jonas Bonn Cc: Jonathan Corbet Cc: Ley Foon Tan Cc: Mark Salter Cc: Martin Schwidefsky Cc: Matt Turner Cc: Michael Ellerman Cc: Michal Simek Cc: Palmer Dabbelt Cc: Paul Burton Cc: Richard Kuo Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Serge Semin Cc: Thomas Gleixner Cc: Tony Luck Cc: Vineet Gupta Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'mips_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2018-10-26T21:43:48+00:00

Pull MIPS updates from Paul Burton: - kexec support for the generic MIPS platform when running on a CPU including the MIPS Coherence Manager & related hardware. - Improvements to the definition of memory barriers used around MMIO accesses, and fixes in their use. - Switch to CONFIG_NO_BOOTMEM from Mike Rapoport, finally dropping reliance on the old bootmem code. - A number of fixes & improvements for Loongson 3 systems. - DT & config updates for the Microsemi Ocelot platform. - Workaround to enable USB power on the Netgear WNDR3400v3. - Various cleanups & fixes. * tag 'mips_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (51 commits) MIPS: Cleanup DSP ASE detection MIPS: dts: Change upper case to lower case MIPS: generic: Add Network, SPI and I2C to ocelot_defconfig MIPS: Loongson-3: Fix BRIDGE irq delivery problem MIPS: Loongson-3: Fix CPU UART irq delivery problem MIPS: Remove unused PREF, PREFE & PREFX macros MIPS: lib: Use kernel_pref & user_pref in memcpy() MIPS: Remove unused CAT macro MIPS: Add kernel_pref & user_pref helpers MIPS: Remove unused TTABLE macro MIPS: Remove unused PIC macros MIPS: Remove unused MOVN & MOVZ macros MIPS: Provide actually relaxed MMIO accessors MIPS: Enforce strong ordering for MMIO accessors MIPS: Correct `mmiowb' barrier for `wbflush' platforms MIPS: Define MMIO ordering barriers MIPS: mscc: add PCB120 to the ocelot fitImage MIPS: mscc: add DT for Ocelot PCB120 MIPS: memset: Limit excessive `noreorder' assembly mode use MIPS: memset: Fix CPU_DADDI_WORKAROUNDS `small_fixup' regression ...

mtd: rawnand: Move platform_nand_xxx definitions out of rawnand.h

2018-10-03T09:12:25+00:00

platform_nand_xxx definitions are just used by the plat_nand driver. Let's move those definitions out of the core/driver-agnostic rawnand.h header. Signed-off-by: Boris Brezillon Signed-off-by: Miquel Raynal

mtd: rawnand: plat_nand: Pass a nand_chip object to all platform_nand_ctrl hooks

2018-10-03T09:12:25+00:00

Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. In order to do that, we first need to update the platform_nand_ctrl hooks to take a nand_chip object instead of an mtd_info. We add temporary plat_nand_xxx() wrappers to the do the mtd -> chip conversion, but those will be dropped when patching nand_chip hooks to take a nand_chip object. Signed-off-by: Boris Brezillon Reviewed-by: Alexander Sverdlin Acked-by: Alexander Sverdlin Acked-by: Robert Jarzmik Acked-by: Krzysztof Halasa Acked-by: Paul Burton Signed-off-by: Miquel Raynal

MIPS: Convert to using %pOFn instead of device_node.name

2018-08-28T16:53:24+00:00

In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/20315/ Cc: Ralf Baechle Cc: James Hogan Cc: John Crispin Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org