kernel/linux.git/arch/mips/include/asm/mips-boards, branch linux-4.16.y

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

irqchip: mips-gic: Move various definitions to the driver

2017-09-04T11:53:14+00:00

Move the definitions of macros used to convert between hardware IRQ numbers & shared or local interrupt numbers into the irqchip driver, which is all that should ever need to care about them. Remove GIC_CPU_TO_VEC_OFFSET() in the process since it's never used. Signed-off-by: Paul Burton Acked-by: Marc Zyngier Cc: Jason Cooper Cc: Thomas Gleixner Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17039/ Signed-off-by: Ralf Baechle

MIPS: SEAD3: Probe EHCI controller using DT

2016-10-04T23:31:20+00:00

Probe the SEAD3 EHCI controller using the generic-ehci driver & device tree rather than platform code, in order to reduce the amount of the latter. Now that no devices probed from platform code require interrupts, remove the retrieval of the IRQ domain & sead3int.h. Signed-off-by: Paul Burton Cc: Rob Herring Cc: Mark Rutland Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14051/ Signed-off-by: Ralf Baechle

MIPS: SEAD3: Probe ethernet controller using DT

2016-10-04T23:31:20+00:00

Probe the smsc911x ethernet controller using device tree rather than platform code, reducing the amount of the latter. Signed-off-by: Paul Burton Cc: Rob Herring Cc: Mark Rutland Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14050/ Signed-off-by: Ralf Baechle

MIPS: SEAD3: Probe UARTs using DT

2016-10-04T23:31:20+00:00

Probe the UARTs on SEAD3 boards using device tree rather than platform code, in order to reduce the amount of the latter. This requires that CONFIG_SERIAL_OF_PLATFORM be enabled, so enable it in sead3_defconfig. The SEAD3 DT shim code is extended to read bootloader environment variables to determine the appropriate UART & mode for kernel console output & set the stdout-path property of the chosen node accordingly. In contrast to the old platform code, which appears to have only ever set "console=ttyS0,38400n8r" with the code in console_config never having an effect, this will honor the "yamontty" environment variable to select between the 2 UARTs on the board and then check the "modetty0" or "modetty1" variable as appropriate to determine the UART configuration. Signed-off-by: Paul Burton Cc: Rob Herring Cc: Mark Rutland Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14048/ Signed-off-by: Ralf Baechle

MIPS: SEAD3: Probe interrupt controllers using DT

2016-10-04T23:31:20+00:00

Probe the CPU interrupt controller & optional Global Interrupt Controller (GIC) using devicetree rather than platform code. Because the bootloader on SEAD3 does not provide a device tree to the kernel & the device tree is always built in, we patch out the GIC node during boot if we detect that a GIC is not present in the system. The appropriate IRQ domain is discovered by platform code setting up device IRQ numbers temporarily. It will be removed by further patches which move the devices towards being probed via device tree. No behavioural change is intended by this patch. Signed-off-by: Paul Burton Cc: Matt Redfearn Cc: Kefeng Wang Cc: Jacek Anaszewski Cc: Rob Herring Cc: Mark Rutland Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14047/ Signed-off-by: Ralf Baechle

MIPS: SEAD3: New header file sead3-addr.h with hardware addresses.

2015-04-01T15:22:07+00:00

Signed-off-by: Ralf Baechle

MIPS: Move gic.h to include/linux/irqchip/mips-gic.h

2014-11-24T06:44:59+00:00

Now that the MIPS GIC irqchip lives in drivers/irqchip/, move its header over to include/linux/irqchip/. Signed-off-by: Andrew Bresticker Cc: Daniel Lezcano Cc: Thomas Gleixner Cc: Jason Cooper Cc: Paul Burton Cc: Qais Yousef Cc: John Crispin Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8129/ Signed-off-by: Ralf Baechle

irqchip: mips-gic: Support local interrupts

2014-11-24T06:44:56+00:00

The MIPS GIC supports 7 local interrupts, 2 of which are the GIC local watchdog and count/compare timer. The remainder are CPU interrupts which may optionally be re-routed through the GIC. GIC hardware IRQs 0-6 are now used for local interrupts while hardware IRQs 7+ are used for external (shared) interrupts. Note that the 5 CPU interrupts may not be re-routable through the GIC. In that case mapping will fail and the vectors reported in C0_IntCtl should be used instead. gic_get_c0_compare_int() and gic_get_c0_perfcount_int() will return the correct IRQ number to use for the C0 timer and perfcounter interrupts based on the routability of those interrupts through the GIC. A separate irq_chip, with callbacks that mask/unmask the local interrupt on all CPUs, is used for the C0 timer and performance counter interrupts since all other platforms do not use the percpu IRQ API for those interrupts. Malta, SEAD-3, and the GIC clockevent driver have been updated to use local interrupts and the R4K clockevent driver has been updated to poll for C0 timer interrupts through the GIC when the GIC is present. Signed-off-by: Andrew Bresticker Acked-by: Jason Cooper Reviewed-by: Qais Yousef Tested-by: Qais Yousef Cc: Thomas Gleixner Cc: Jeffrey Deans Cc: Markos Chandras Cc: Paul Burton Cc: Jonas Gorski Cc: John Crispin Cc: David Daney Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7819/ Signed-off-by: Ralf Baechle

irqchip: mips-gic: Stop using per-platform mapping tables

2014-11-24T06:44:56+00:00

Now that the GIC properly uses IRQ domains, kill off the per-platform routing tables that were used to make the GIC appear transparent. This includes: - removing the mapping tables and the support for applying them, - moving GIC IPI support to the GIC driver, - properly routing the i8259 through the GIC on Malta, and - updating IRQ assignments on SEAD-3 when the GIC is present. Platforms no longer will pass an interrupt mapping table to gic_init. Instead, they will pass the CPU interrupt vector (2 - 7) that they expect the GIC to route interrupts to. Note that in EIC mode this value is ignored and all GIC interrupts are routed to EIC vector 1. Signed-off-by: Andrew Bresticker Acked-by: Jason Cooper Reviewed-by: Qais Yousef Tested-by: Qais Yousef Cc: Thomas Gleixner Cc: Jeffrey Deans Cc: Markos Chandras Cc: Paul Burton Cc: Jonas Gorski Cc: John Crispin Cc: David Daney Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7816/ Signed-off-by: Ralf Baechle