kernel/linux.git/arch/mips/include/asm/mach-malta, branch linux-4.4.y

MIPS: Malta: Setup RAM regions via DT

2015-11-11T07:35:47+00:00

Move memory configuration to be performed via device tree for the Malta board. This moves more Malta specific code to malta-dtshim.c, leaving the rest of the mti-malta code a little more board-agnostic. This will be useful to share more code between boards, with the device tree providing the board specifics as intended. Since we can't rely upon Malta boards running a bootloader capable of handling devictrees & filling in the required information, a piece of shim code (malta_dt_shim) is added to consume the (e)memsize variables provided as part of the bootloader environment (or on the kernel command line) then generate the DT memory node using the provided values. Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: Kumar Gala Cc: linux-kernel@vger.kernel.org Cc: Ian Campbell Cc: Rob Herring Cc: James Hogan Cc: Pawel Moll Cc: Markos Chandras Cc: Mark Rutland Patchwork: https://patchwork.linux-mips.org/patch/11222/ Signed-off-by: Ralf Baechle

irqchip: mips-gic: Probe for number of external interrupts

2014-11-24T06:44:56+00:00

Instead of requiring platforms to define the correct GIC_NUM_INTRS, use the value reported in GIC_SH_CONFIG. Signed-off-by: Andrew Bresticker Acked-by: Jason Cooper Reviewed-by: Qais Yousef Tested-by: Qais Yousef Cc: Thomas Gleixner Cc: Jeffrey Deans Cc: Markos Chandras Cc: Paul Burton Cc: Jonas Gorski Cc: John Crispin Cc: David Daney Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7817/ Signed-off-by: Ralf Baechle

MIPS: Malta: EVA: Rename 'eva_entry' to 'platform_eva_init'

2014-08-19T16:24:41+00:00

Rename 'eva_entry' to 'platform_eva_init' as required by the new 'eva_init' macro in the eva.h header. Since this macro is now used in a platform dependent way, it must not depend on its caller so move the t1 register initialization inside this macro. Also set the .reorder assembler option in case the caller may have previously set .noreorder. This may allow a few assembler optimizations. Finally include missing headers and document the register usage for this macro. Reviewed-by: Paul Burton Signed-off-by: Markos Chandras Patchwork: http://patchwork.linux-mips.org/patch/7423/ Signed-off-by: James Hogan

MIPS: GIC: Move GIC_NUM_INTRS into platform irq.h

2014-08-01T22:06:40+00:00

The value of GIC_NUM_INTRS is platform-specific. Using a default value from gic.h will result in incorrect behaviour on some systems, so require a suitable definition to be present in the platform's irq.h. Signed-off-by: Jeffrey Deans Signed-off-by: Markos Chandras Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7373/ Signed-off-by: Ralf Baechle

MIPS: Malta: add suspend state entry code

2014-05-30T19:01:09+00:00

This patch introduces code which will enter a suspend state via the PIIX4. This can only be done when PCI support is enabled since it requires access to PCI I/O space and the generation of a special cycle on the PCI bus. In cases where PCI is disabled the mips_pm_suspend function will simply always return an error. Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6905/ Signed-off-by: Ralf Baechle

MIPS: MT: Remove SMTC support

2014-05-23T22:07:01+00:00

Nobody is maintaining SMTC anymore and there also seems to be no userbase. Which is a pity - the SMTC technology primarily developed by Kevin D. Kissell is an ingenious demonstration for the MT ASE's power and elegance. Based on Markos Chandras patch https://patchwork.linux-mips.org/patch/6719/ which while very similar did no longer apply cleanly when I tried to merge it plus some additional post-SMTC cleanup - SMTC was a feature as tricky to remove as it was to merge once upon a time. Signed-off-by: Ralf Baechle

MIPS: malta: Add support for SMP EVA

2014-03-26T22:09:20+00:00

Allow secondary cores to program their segment control registers during smp bootstrap code. This enables EVA on Malta SMP configurations Signed-off-by: Markos Chandras

MIPS: malta: spaces.h: Add spaces.h file for Malta (EVA)

2014-03-26T22:09:19+00:00

Add a spaces.h file for Malta to override certain memory macros when operating in EVA mode. Signed-off-by: Markos Chandras

MIPS: malta: Configure Segment Control registers for EVA boot

2014-03-26T22:09:19+00:00

The Malta board aliases 0x80000000 - 0xffffffff to 0x00000000 - 0x7fffffff ignoring the 256 MB IO hole in 0x10000000. The physical memory is shifted to 0x80000000 so up to 2GB can be used. Kuseg is expanded to 3GB (due to board limitations only 2GB can be accessed) and lowmem (kernel space) is expanded to 2GB. The Segment Control registers are programmed as follows: Virtual memory Physical memory Mapping 0x00000000 - 0x7fffffff 0x80000000 - 0xfffffffff MUSUK (kuseg) 0x80000000 - 0x9fffffff 0x00000000 - 0x1ffffffff MUSUK (kseg0) 0xa0000000 - 0xbf000000 0x00000000 - 0x1ffffffff MUSUK (kseg1) 0xc0000000 - 0xdfffffff - MK (kseg2) 0xe0000000 - 0xffffffff - MK (kseg3) The location of exception vectors remain the same since 0xbfc00000 (traditional exception base) still maps to 0x1fc00000 physical. Signed-off-by: Markos Chandras

MIPS: Whitespace cleanup.

2013-02-01T09:00:22+00:00

Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle