kernel/linux.git/arch/mips/include/asm/mach-ath79, branch linux-4.4.y

MIPS: ath79: fix ar933x uart parity mode

2019-08-04T07:34:36+00:00

[ Upstream commit db13a5ba2732755cf13320f3987b77cf2a71e790 ] While trying to get the uart with parity working I found setting even parity enabled odd parity insted. Fix the register settings to match the datasheet of AR9331. A similar patch was created by 8devices, but not sent upstream. https://github.com/8devices/openwrt-8devices/commit/77c5586ade3bb72cda010afad3f209ed0c98ea7c Signed-off-by: Stefan Hellermann Signed-off-by: Paul Burton Cc: linux-mips@vger.kernel.org Signed-off-by: Sasha Levin

MIPS: ath79: fix system restart

2018-09-26T06:35:05+00:00

[ Upstream commit f8a7bfe1cb2c1ebfa07775c9c8ac0ad3ba8e5ff5 ] This patch disables irq on reboot to fix hang issues that were observed due to pending interrupts. Signed-off-by: Felix Fietkau Signed-off-by: John Crispin Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/19913/ Cc: James Hogan Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset

2018-05-30T05:49:12+00:00

[ Upstream commit 05454c1bde91fb013c0431801001da82947e6b5a ] According to the QCA u-boot source the "PCIE Phase Lock Loop Configuration (PCIE_PLL_CONFIG)" register is for all SoCs except the QCA955X and QCA956X at offset 0x10. Since the PCIE PLL config register is only defined for the AR724x fix only this value. The value is wrong since the day it was added and isn't used by any driver yet. Signed-off-by: Mathias Kresin Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16048/ Signed-off-by: James Hogan Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

MIPS: Remove all the uses of custom gpio.h

2015-09-03T10:08:02+00:00

Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS machines, and each machine type provides its own gpio.h. However only a handful really implement the GPIO API, most just forward everythings to gpiolib. The Alchemy machine is notable as it provides a system to allow implementing the GPIO API at the board level. But it is not used by any board currently supported, so it can also be removed. For most machine types we can just remove the custom gpio.h, as well as the custom wrappers if some exists. Some of the code found in the wrappers must be moved to the respective GPIO driver. A few more fixes are need in some drivers as they rely on linux/gpio.h to provides some machine specific definitions, or used asm/gpio.h instead of linux/gpio.h for the gpio API. Signed-off-by: Alban Bedel Reviewed-by: Linus Walleij Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens Cc: Rafał Miłecki Cc: Bartlomiej Zolnierkiewicz Cc: Tejun Heo Cc: Alexandre Courbot Cc: Dmitry Torokhov Cc: Florian Fainelli Cc: Manuel Lauss Cc: Joe Perches Cc: Daniel Walter Cc: Sergey Ryazanov Cc: Huacai Chen Cc: James Hartley Cc: Andrew Bresticker Cc: Paul Burton Cc: Jiri Kosina Cc: Bjorn Helgaas Cc: Wolfram Sang Cc: Randy Dunlap Cc: Varka Bhadram Cc: Masanari Iida Cc: Tomi Valkeinen Cc: Michael Buesch Cc: abdoulaye berthe Cc: linux-kernel@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: netdev@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10828/ Signed-off-by: Ralf Baechle

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2015-06-27T19:44:34+00:00

Pull MIPS updates from Ralf Baechle: - Improvements to the tlb_dump code - KVM fixes - Add support for appended DTB - Minor improvements to the R12000 support - Minor improvements to the R12000 support - Various platform improvments for BCM47xx - The usual pile of minor cleanups - A number of BPF fixes and improvments - Some improvments to the support for R3000 and DECstations - Some improvments to the ATH79 platform support - A major patchset for the JZ4740 SOC adding support for the CI20 platform - Add support for the Pistachio SOC - Minor BMIPS/BCM63xx platform support improvments. - Avoid "SYNC 0" as memory barrier when unlocking spinlocks - Add support for the XWR-1750 board. - Paul's __cpuinit/__cpuinitdata cleanups. - New Malta CPU board support large memory so enable ZONE_DMA32. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits) MIPS: spinlock: Adjust arch_spin_lock back-off time MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA MIPS: BCM47xx: Simplify handling SPROM revisions MIPS: Cobalt Don't use module_init in non-modular MTD registration. MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/ MIPS: use for_each_sg() MIPS: BCM47xx: Don't select BCMA_HOST_PCI MIPS: BCM47xx: Add helper variable for storing NVRAM length MIPS: IRQ/IP27: Move IRQ allocation API to platform code. MIPS: Replace smp_mb with release barrier function in unlocks. MIPS: i8259: DT support MIPS: Malta: Basic DT plumbing MIPS: include errno.h for ENODEV in mips-cm.h MIPS: Define GCR_GIC_STATUS register fields MIPS: BPF: Introduce BPF ASM helpers MIPS: BPF: Use BPF register names to describe the ABI MIPS: BPF: Move register definition to the BPF header MIPS: net: BPF: Replace RSIZE with SZREG MIPS: BPF: Free up some callee-saved registers MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers ...

MIPS: ath79: Improve the DDR controller interface

2015-06-21T19:53:51+00:00

The DDR controller need to be used by the IRQ controller to flush the write buffer of some devices before running the IRQ handler. It is also used by the PCI controller to setup the PCI memory windows. The current interface used to access the DDR controller doesn't provides any useful abstraction and simply rely on a shared global pointer. Replace this by a simple API to setup the PCI memory windows and use the write buffer flush independently of the SoC type. That remove the need for the shared global pointer, simplify the IRQ handler code. [ralf@linux-mips.org: Folded in Alban Bedel's follup fix.] Signed-off-by: Alban Bedel Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker Cc: Qais Yousef Cc: Wolfram Sang Cc: Sergey Ryazanov Cc: Gabor Juhos Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9773/ Patchwork: http://patchwork.linux-mips.org/patch/10543/ Signed-off-by: Ralf Baechle

MIPS: ath79: Correctly name the defines for the PLL_FB register

2015-06-21T19:53:49+00:00

This register is named PLL_FB and is not a divider but a multiplier. To make things less confusing rename the ARxxxx_PLL_DIV_SHIFT and ARxxxx_PLL_DIV_MASK macros to ARxxxx_PLL_FB_SHIFT and ARxxxx_PLL_FB_MASK. Signed-off-by: Alban Bedel Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker Cc: Qais Yousef Cc: Wolfram Sang Cc: Sergey Ryazanov Cc: Gabor Juhos Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9772/ Signed-off-by: Ralf Baechle

spi: spi-ath79: Add device tree support

2015-04-27T14:44:56+00:00

Set the OF node of the spi controller and use the generic GPIO based chip select instead of the custom controller data. As the controller data isn't used by any board just drop it. Signed-off-by: Alban Bedel Signed-off-by: Mark Brown

MIPS: Create a common

2015-03-31T09:59:40+00:00

11 platforms require at least one of these workarounds to be enabled; 22 platforms do not. In the latter case we can fall back to a generic version. Note that this also deletes an orphaned reference to RM9000_CDEX_SMP_WAR. Suggested-by: Arnd Bergmann Signed-off-by: Kevin Cernekee Signed-off-by: Andrew Bresticker Reviewed-by: James Hogan Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Ezequiel Garcia Cc: James Hartley Cc: James Hogan Patchwork: https://patchwork.linux-mips.org/patch/9567/ Signed-off-by: Ralf Baechle

mips: delete non-required instances of include

2014-01-24T21:39:56+00:00

None of these files are actually using any __init type directives and hence don't need to include . Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker Signed-off-by: John Crispin Patchwork: http://patchwork.linux-mips.org/patch/6320/