kernel/linux.git/arch/mips/dec, branch linux-5.9.y

MIPS: DEC: Restore bootmem reservation for firmware working memory area

2020-11-05T10:51:43+00:00

commit cf3af0a4d3b62ab48e0b90180ea161d0f5d4953f upstream. Fix a crash on DEC platforms starting with: VFS: Mounted root (nfs filesystem) on device 0:11. Freeing unused PROM memory: 124k freed BUG: Bad page state in process swapper pfn:00001 page:(ptrval) refcount:0 mapcount:-128 mapping:00000000 index:0x1 pfn:0x1 flags: 0x0() raw: 00000000 00000100 00000122 00000000 00000001 00000000 ffffff7f 00000000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.9.0-00858-g865c50e1d279 #1 Stack : 8065dc48 0000000b 8065d2b8 9bc27dcc 80645bfc 9bc259a4 806a1b97 80703124 80710000 8064a900 00000001 80099574 806b116c 1000ec00 9bc27d88 806a6f30 00000000 00000000 80645bfc 00000000 31232039 80706ba4 2e392e35 8039f348 2d383538 00000070 0000000a 35363867 00000000 806c2830 80710000 806b0000 80710000 8064a900 00000001 81000000 00000000 00000000 8035af2c 80700000 ... Call Trace: [<8004bc5c>] show_stack+0x34/0x104 [<8015675c>] bad_page+0xfc/0x128 [<80157714>] free_pcppages_bulk+0x1f4/0x5dc [<801591cc>] free_unref_page+0xc0/0x130 [<8015cb04>] free_reserved_area+0x144/0x1d8 [<805abd78>] kernel_init+0x20/0x100 [<80046070>] ret_from_kernel_thread+0x14/0x1c Disabling lock debugging due to kernel taint caused by an attempt to free bootmem space that as from commit b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") has not been anymore reserved due to the removal of generic MIPS arch code that used to reserve all the memory from the beginning of RAM up to the kernel load address. This memory does need to be reserved on DEC platforms however as it is used by REX firmware as working area, as per the TURBOchannel firmware specification[1]: Table 2-2 REX Memory Regions ------------------------------------------------------------------------- Starting Ending Region Address Address Use ------------------------------------------------------------------------- 0 0xa0000000 0xa000ffff Restart block, exception vectors, REX stack and bss 1 0xa0010000 0xa0017fff Keyboard or tty drivers 2 0xa0018000 0xa001f3ff 1) CRT driver 3 0xa0020000 0xa002ffff boot, cnfg, init and t objects 4 0xa0020000 0xa002ffff 64KB scratch space ------------------------------------------------------------------------- 1) Note that the last 3 Kbytes of region 2 are reserved for backward compatibility with previous system software. ------------------------------------------------------------------------- (this table uses KSEG2 unmapped virtual addresses, which in the MIPS architecture are offset from physical addresses by a fixed value of 0xa0000000 and therefore the regions referred do correspond to the beginning of the physical address space) and we call into the firmware on several occasions throughout the bootstrap process. It is believed that pre-REX firmware used with non-TURBOchannel DEC platforms has the same requirements, as hinted by note #1 cited. Recreate the discarded reservation then, in DEC platform code, removing the crash. References: [1] "TURBOchannel Firmware Specification", On-line version, EK-TCAAD-FS-004, Digital Equipment Corporation, January 1993, Chapter 2 "System Module Firmware", p. 2-5 Signed-off-by: Maciej W. Rozycki Fixes: b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Greg Kroah-Hartman Signed-off-by: Thomas Bogendoerfer

MIPS: Only include the platform file needed

2020-05-12T22:17:18+00:00

Instead of including all Platform files, we simply include the needed one and avoid clashes with makefile variables. Signed-off-by: Thomas Bogendoerfer

MIPS: asm: Rename some macros to avoid build errors

2020-05-07T11:20:05+00:00

Use ASM_ prefix to rename some macros (PANIC and PRINT), in order to avoid build errors (all users are updated as well): 1, PANIC conflicts with drivers/scsi/smartpqi/smartpqi_init.c 2, PRINT conflicts with net/netfilter/nf_conntrack_h323_asn1.c and net/ mac80211/debugfs_sta.c Fixes: d339cd02b888eb8 ("MIPS: Move unaligned load/store helpers to inst.h") Reported-by: kbuild test robot Signed-off-by: Huacai Chen Signed-off-by: Thomas Bogendoerfer

MIPS: Use fallthrough for arch/mips

2020-05-07T09:55:47+00:00

Convert the various /* fallthrough */ comments to the pseudo-keyword fallthrough; Done via script: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/ Signed-off-by: Liangliang Huang Reviewed-by: Huacai Chen Signed-off-by: Thomas Bogendoerfer

MIPS: pass non-NULL dev_id on shared request_irq()

2020-03-16T15:04:49+00:00

Recently all usages of setup_irq() was replaced by request_irq(). request_irq() does a few sanity checks that were not done in setup_irq(), if they fail irq registration will fail. One of the check is to ensure that non-NULL dev_id is passed in the case of shared irq. This caused malta on qemu to hang. Fix it by passing handler as dev_id to all request_irq()'s that are shared. For sni, instead of passing non-NULL dev_id, remove shared irq flags. Fixes: ac8fd122e070 ("MIPS: Replace setup_irq() by request_irq()") Reported-by: Nathan Chancellor Suggested-by: Thomas Bogendoerfer Signed-off-by: afzal mohammed Tested-by: Guenter Roeck Tested-by: Nathan Chancellor Signed-off-by: Thomas Bogendoerfer

MIPS: Replace setup_irq() by request_irq()

2020-03-05T15:47:35+00:00

request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). remove_irq() has been replaced by free_irq() as well. There were build error's during previous version, couple of which was reported by kbuild test robot of which one was reported by Thomas Bogendoerfer as well. There were a few more issues including build errors, those also have been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed Signed-off-by: Thomas Bogendoerfer

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

mm: remove include/linux/bootmem.h

2018-10-31T15:54:16+00:00

Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include @@ @@ - #include + #include [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport Signed-off-by: Stephen Rothwell Acked-by: Michal Hocko Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Kroah-Hartman Cc: Guan Xuetao Cc: Ingo Molnar Cc: "James E.J. Bottomley" Cc: Jonas Bonn Cc: Jonathan Corbet Cc: Ley Foon Tan Cc: Mark Salter Cc: Martin Schwidefsky Cc: Matt Turner Cc: Michael Ellerman Cc: Michal Simek Cc: Palmer Dabbelt Cc: Paul Burton Cc: Richard Kuo Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Serge Semin Cc: Thomas Gleixner Cc: Tony Luck Cc: Vineet Gupta Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

MIPS: Convert update_persistent_clock() to update_persistent_clock64()

2018-05-14T22:58:23+00:00

Since struct timespec is not y2038 safe on 32bit machines, this patch converts update_persistent_clock() to update_persistent_clock64() using struct timespec64. The rtc_mips_set_time() and rtc_mips_set_mmss() interfaces were using 'unsigned long' type that is not y2038 safe on 32bit machines, moreover there is only one platform implementing rtc_mips_set_time() and two platforms implementing rtc_mips_set_mmss(), so we can just make them each implement update_persistent_clock64() directly, to get that helper out of the common mips code by removing rtc_mips_set_time() and rtc_mips_set_mmss() interfaces. Signed-off-by: Baolin Wang Acked-by: Arnd Bergmann Cc: Ralf Baechle Cc: Huacai Chen Cc: Paul Burton Cc: linux-mips@linux-mips.org Signed-off-by: James Hogan