kernel/linux.git/arch/mips/bmips, branch v5.10.257

mips: bmips: BCM6358: make sure CBR is correctly set

2024-07-05T07:12:37+00:00

[ Upstream commit ce5cdd3b05216b704a704f466fb4c2dff3778caf ] It was discovered that some device have CBR address set to 0 causing kernel panic when arch_sync_dma_for_cpu_all is called. This was notice in situation where the system is booted from TP1 and BMIPS_GET_CBR() returns 0 instead of a valid address and !!(read_c0_brcm_cmt_local() & (1 << 31)); not failing. The current check whether RAC flush should be disabled or not are not enough hence lets check if CBR is a valid address or not. Fixes: ab327f8acdf8 ("mips: bmips: BCM6358: disable RAC flush for TP1") Signed-off-by: Christian Marangi Acked-by: Florian Fainelli Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin

mips: bmips: BCM6358: disable RAC flush for TP1

2023-04-05T09:23:46+00:00

[ Upstream commit ab327f8acdf8d06601fbf058859a539a9422afff ] RAC flush causes kernel panics on BCM6358 with EHCI/OHCI when booting from TP1: [ 3.881739] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 3.895011] Reserved instruction in kernel code[#1]: [ 3.900113] CPU: 0 PID: 1 Comm: init Not tainted 5.10.16 #0 [ 3.905829] $ 0 : 00000000 10008700 00000000 77d94060 [ 3.911238] $ 4 : 7fd1f088 00000000 81431cac 81431ca0 [ 3.916641] $ 8 : 00000000 ffffefff 8075cd34 00000000 [ 3.922043] $12 : 806f8d40 f3e812b7 00000000 000d9aaa [ 3.927446] $16 : 7fd1f068 7fd1f080 7ff559b8 81428470 [ 3.932848] $20 : 00000000 00000000 55590000 77d70000 [ 3.938251] $24 : 00000018 00000010 [ 3.943655] $28 : 81430000 81431e60 81431f28 800157fc [ 3.949058] Hi : 00000000 [ 3.952013] Lo : 00000000 [ 3.955019] epc : 80015808 setup_sigcontext+0x54/0x24c [ 3.960464] ra : 800157fc setup_sigcontext+0x48/0x24c [ 3.965913] Status: 10008703 KERNEL EXL IE [ 3.970216] Cause : 00800028 (ExcCode 0a) [ 3.974340] PrId : 0002a010 (Broadcom BMIPS4350) [ 3.979170] Modules linked in: ohci_platform ohci_hcd fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug usbcore nls_base usb_common [ 3.992907] Process init (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=77e22ec8) [ 4.000776] Stack : 81431ef4 7fd1f080 81431f28 81428470 7fd1f068 81431edc 7ff559b8 81428470 [ 4.009467] 81431f28 7fd1f080 55590000 77d70000 77d5498c 80015c70 806f0000 8063ae74 [ 4.018149] 08100002 81431f28 0000000a 08100002 81431f28 0000000a 77d6b418 00000003 [ 4.026831] ffffffff 80016414 80080734 81431ecc 81431ecc 00000001 00000000 04000000 [ 4.035512] 77d54874 00000000 00000000 00000000 00000000 00000012 00000002 00000000 [ 4.044196] ... [ 4.046706] Call Trace: [ 4.049238] [<80015808>] setup_sigcontext+0x54/0x24c [ 4.054356] [<80015c70>] setup_frame+0xdc/0x124 [ 4.059015] [<80016414>] do_notify_resume+0x1dc/0x288 [ 4.064207] [<80011b50>] work_notifysig+0x10/0x18 [ 4.069036] [ 4.070538] Code: 8fc300b4 00001025 26240008 ac830004 3c048063 0c0228aa 24846a00 26240010 [ 4.080686] [ 4.082517] ---[ end trace 22a8edb41f5f983b ]--- [ 4.087374] Kernel panic - not syncing: Fatal exception [ 4.092753] Rebooting in 1 seconds.. Because the bootloader (CFE) is not initializing the Read-ahead cache properly on the second thread (TP1). Since the RAC was not initialized properly, we should avoid flushing it at the risk of corrupting the instruction stream as seen in the trace above. Fixes: d59098a0e9cb ("MIPS: bmips: use generic dma noncoherent ops") Signed-off-by: Álvaro Fernández Rojas Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin

MIPS: Use address-of operator on section symbols

2022-05-15T18:00:08+00:00

commit d422c6c0644bccbb1ebeefffa51f35cec3019517 upstream. When building xway_defconfig with clang: arch/mips/lantiq/prom.c:82:23: error: array comparison always evaluates to true [-Werror,-Wtautological-compare] else if (__dtb_start != __dtb_end) ^ 1 error generated. These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the resulting assembly with either clang/ld.lld or gcc/ld (tested with diff + objdump -Dr). Do the same thing across the entire MIPS subsystem to ensure there are no more warnings around this type of comparison. Link: https://github.com/ClangBuiltLinux/linux/issues/1232 Signed-off-by: Nathan Chancellor Acked-by: Florian Fainelli Signed-off-by: Thomas Bogendoerfer Cc: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

dma-direct: rename and cleanup __phys_to_dma

2020-09-11T07:14:43+00:00

The __phys_to_dma vs phys_to_dma distinction isn't exactly obvious. Try to improve the situation by renaming __phys_to_dma to phys_to_dma_unencryped, and not forcing architectures that want to override phys_to_dma to actually provide __phys_to_dma. Signed-off-by: Christoph Hellwig Reviewed-by: Robin Murphy

dma-direct: remove __dma_to_phys

2020-09-11T07:14:25+00:00

There is no harm in just always clearing the SME encryption bit, while significantly simplifying the interface. Signed-off-by: Christoph Hellwig Reviewed-by: Robin Murphy

MIPS: Only include the platform file needed

2020-05-12T22:17:18+00:00

Instead of including all Platform files, we simply include the needed one and avoid clashes with makefile variables. Signed-off-by: Thomas Bogendoerfer

MIPS: BMIPS: Replace by

2020-02-19T18:36:02+00:00

The Broadcom BMIPS platform code is not a clock provider, and just needs to call of_clk_init(). Hence it can include instead of . Signed-off-by: Geert Uytterhoeven Acked-by: Florian Fainelli Reviewed-by: Philippe Mathieu-Daudé Reviewed-by: Stephen Boyd Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: Paul Cercueil Cc: James Hartley Cc: John Crispin Cc: linux-mips@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-clk@vger.kernel.org Cc: linux-kernel@vger.kernel.org

dma-mapping: drop the dev argument to arch_sync_dma_for_*

2019-11-20T19:31:38+00:00

These are pure cache maintainance routines, so drop the unused struct device argument. Signed-off-by: Christoph Hellwig Suggested-by: Daniel Vetter

docs: arm: convert docs to ReST and rename to *.rst

2019-07-15T12:20:24+00:00

Converts ARM the text files to ReST, preparing them to be an architecture book. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab Reviewed-by Corentin Labbe # For sun4i-ss

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman