kernel/linux.git/arch/mips/ar7/platform.c, branch linux-4.16.y

MIPS: AR7: ensure the port type's FCR value is used

2018-01-10T10:34:56+00:00

Since commit aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers"), the port's default FCR value isn't used in serial8250_do_set_termios anymore, but copied over once in serial8250_config_port and then modified as needed. Unfortunately, serial8250_config_port will never be called if the port is shared between kernel and userspace, and the port's flag doesn't have UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well. This causes garbled output from userspace: [ 5.220000] random: procd urandom read with 49 bits of entropy available ers [kee Fix this by forcing it to be configured on boot, resulting in the expected output: [ 5.250000] random: procd urandom read with 50 bits of entropy available Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level Fixes: aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers") Signed-off-by: Jonas Gorski Cc: Greg Kroah-Hartman Cc: Yoshihiro YUNOMAE Cc: Florian Fainelli Cc: Nicolas Schichan Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17544/ Signed-off-by: Ralf Baechle

MIPS: AR7: Ensure that serial ports are properly set up

2017-11-08T14:57:55+00:00

Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is never copied, resulting in a dead port. Fixes: 154615d55459 ("MIPS: AR7: Use correct UART port type") Signed-off-by: Oswald Buddenhagen [jonas.gorski: add Fixes tag] Signed-off-by: Jonas Gorski Reviewed-by: Florian Fainelli Cc: Ralf Baechle Cc: Greg Kroah-Hartman Cc: Yoshihiro YUNOMAE Cc: Nicolas Schichan Cc: Oswald Buddenhagen Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Cc: Patchwork: https://patchwork.linux-mips.org/patch/17543/ Signed-off-by: James Hogan

MIPS: AR7: Defer registration of GPIO

2017-11-08T12:44:26+00:00

When called from prom init code, ar7_gpio_init() will fail as it will call gpiochip_add() which relies on a working kmalloc() to alloc the gpio_desc array and kmalloc is not useable yet at prom init time. Move ar7_gpio_init() to ar7_register_devices() (a device_initcall) where kmalloc works. Fixes: 14e85c0e69d5 ("gpio: remove gpio_descs global array") Signed-off-by: Jonas Gorski Reviewed-by: Florian Fainelli Cc: Ralf Baechle Cc: Greg Kroah-Hartman Cc: Yoshihiro YUNOMAE Cc: Nicolas Schichan Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Cc: # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/17542/ Signed-off-by: James Hogan

MIPS: Audit and remove any unnecessary uses of module.h

2017-02-14T09:00:25+00:00

Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of some code where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h might have been the implicit source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace/add as needed. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Build coverage of all the mips defconfigs revealed the module.h header was masking a couple of implicit include instances, so we add the appropriate headers there. Signed-off-by: Paul Gortmaker Cc: David Daney Cc: John Crispin Cc: Ralf Baechle Cc: "Steven J. Hill" Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15131/ [james.hogan@imgtec.com: Preserve sort order where it already exists] Signed-off-by: James Hogan

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2015-09-03T23:55:55+00:00

Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.3 for MIPS. Here's the summary: Three fixes that didn't make 4.2-stable: - a -Os build might compile the kernel using the MIPS16 instruction set but the R2 optimized inline functions in are implemented using 32-bit wide instructions which is invalid. - a build error in pgtable-bits.h for a particular kernel configuration. - accessing registers of the CM GCR might have been compiled to use 64 bit accesses but these registers are onl 32 bit wide. And also a few new bits: - move the ATH79 GPIO driver to drivers/gpio - the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h, change ATH79 accordingly. - fix definition of pgprot_writecombine - add an implementation of dma_map_ops.mmap - fix alignment of quiet build output for vmlinuz link - BCM47xx: Use kmemdup rather than duplicating its implementation - Netlogic: Fix 0x0x prefixes of constants. - merge Bjorn Helgaas' series to remove most of the weak keywords from function declarations. - CP0 and CP1 registers are best considered treated as unsigned values to avoid large values from becoming negative values. - improve support for the MIPS GIC timer. - enable common clock framework for Malta and SEAD3. - a number of improvments and fixes to dump_tlb(). - document the MIPS TLB dump functionality in Magic SysRq. - Cavium Octeon CN68XX improvments. - NetLogic improvments. - irq: Use access helper irq_data_get_affinity_mask. - handle MSA unaligned accesses. - a number of R6-related math-emu fixes. - support for I6400. - improvments to MSA support. - add uprobes support. - move from deprecated __initcall to arch_initcall. - remove finish_arch_switch(). - IRQ cleanups by Thomas Gleixner. - migrate to new 'set-state' interface. - random small cleanups" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits) MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16. MIPS: Fix alignment of quiet build output for vmlinuz link MIPS: math-emu: Remove unused handle_dsemul function declaration MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction MIPS: inst.h: Add new MIPS R6 FPU opcodes MIPS: Octeon: Fix management port MII address on Kontron S1901 MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation STAGING: Octeon: Use common helpers for determining interface and port MIPS: Octeon: Support interfaces 4 and 5 MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports MIPS: Octeon: Initialize CN68XX PKO STAGING: Octeon: Support CN68XX style WQE ...

MIPS: Remove all the uses of custom gpio.h

2015-09-03T10:08:02+00:00

Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS machines, and each machine type provides its own gpio.h. However only a handful really implement the GPIO API, most just forward everythings to gpiolib. The Alchemy machine is notable as it provides a system to allow implementing the GPIO API at the board level. But it is not used by any board currently supported, so it can also be removed. For most machine types we can just remove the custom gpio.h, as well as the custom wrappers if some exists. Some of the code found in the wrappers must be moved to the respective GPIO driver. A few more fixes are need in some drivers as they rely on linux/gpio.h to provides some machine specific definitions, or used asm/gpio.h instead of linux/gpio.h for the gpio API. Signed-off-by: Alban Bedel Reviewed-by: Linus Walleij Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens Cc: Rafał Miłecki Cc: Bartlomiej Zolnierkiewicz Cc: Tejun Heo Cc: Alexandre Courbot Cc: Dmitry Torokhov Cc: Florian Fainelli Cc: Manuel Lauss Cc: Joe Perches Cc: Daniel Walter Cc: Sergey Ryazanov Cc: Huacai Chen Cc: James Hartley Cc: Andrew Bresticker Cc: Paul Burton Cc: Jiri Kosina Cc: Bjorn Helgaas Cc: Wolfram Sang Cc: Randy Dunlap Cc: Varka Bhadram Cc: Masanari Iida Cc: Tomi Valkeinen Cc: Michael Buesch Cc: abdoulaye berthe Cc: linux-kernel@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: netdev@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10828/ Signed-off-by: Ralf Baechle

phy: fixed_phy: Add gpio to determine link up/down.

2015-08-31T21:48:02+00:00

An SFP module may have a link up/down status pin which can be connection to a GPIO line of the host. Add support for reading such an GPIO in the fixed_phy driver. Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

MIPS: AR7: Replace mac address parsing

2015-04-02T11:54:22+00:00

Replace sscanf() with mac_pton(). [ralf@linux-mips.org: Resolved conflict.] Signed-off-by: Daniel Walter Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7151/ Signed-off-by: Ralf Baechle

mips: Convert pr_warning to pr_warn

2014-11-24T06:44:51+00:00

Use the much more common pr_warn instead of pr_warning with the goal of removing pr_warning eventually. Other miscellanea: o Coalesce formats o Realign arguments Signed-off-by: Joe Perches Cc: linux-mips Cc: LKML Patchwork: https://patchwork.linux-mips.org/patch/7935/ Signed-off-by: Ralf Baechle

MIPS: Whitespace cleanup.

2013-02-01T09:00:22+00:00

Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle