kernel/linux.git/arch/mips/alchemy/devboards, branch v6.12.80

MIPS: Alchemy: switch to use software nodes for GPIOs

2024-07-03T15:15:17+00:00

Switch to use software nodes/properties to describe GPIOs for the ADS7846 touchscreen and the SPI controller (away from using GPIO lookup tables). This allows removing use of ADS7846 platform data, which will be going away. Signed-off-by: Dmitry Torokhov Reviewed-by: Linus Walleij Signed-off-by: Thomas Bogendoerfer

MIPS: Alchemy: Fix an out-of-bound access in db1550_dev_setup()

2024-01-11T11:50:30+00:00

When calling spi_register_board_info(), Fixes: f869d42e580f ("MIPS: Alchemy: Improved DB1550 support, with audio and serial busses.") Signed-off-by: Christophe JAILLET Signed-off-by: Thomas Bogendoerfer

MIPS: Alchemy: Fix an out-of-bound access in db1200_dev_setup()

2024-01-11T11:50:25+00:00

When calling spi_register_board_info(), we should pass the number of elements in 'db1200_spi_devs', not 'db1200_i2c_devs'. Fixes: 63323ec54a7e ("MIPS: Alchemy: Extended DB1200 board support.") Signed-off-by: Christophe JAILLET Signed-off-by: Thomas Bogendoerfer

MIPS: Alchemy: only build mmc support helpers if au1xmmc is enabled

2023-09-25T09:43:55+00:00

While commit d4a5c59a955b ("mmc: au1xmmc: force non-modular build and remove symbol_get usage") to be built in, it can still build a kernel without MMC support and thuse no mmc_detect_change symbol at all. Add ifdefs to build the mmc support code in the alchemy arch code conditional on mmc support. Fixes: d4a5c59a955b ("mmc: au1xmmc: force non-modular build and remove symbol_get usage") Reported-by: kernel test robot Signed-off-by: Christoph Hellwig Acked-by: Randy Dunlap Tested-by: Randy Dunlap # build-tested Signed-off-by: Thomas Bogendoerfer

mmc: au1xmmc: force non-modular build and remove symbol_get usage

2023-08-02T18:17:35+00:00

au1xmmc is split somewhat awkwardly into the main mmc subsystem driver, and callbacks in platform_data that sit under arch/mips/ and are always built in. The latter than call mmc_detect_change through symbol_get. Remove the use of symbol_get by requiring the driver to be built in. In the future the interrupt handlers for card insert/eject detection should probably be moved into the main driver, and which point it can be built modular again. Signed-off-by: Christoph Hellwig Acked-by: Manuel Lauss Reviewed-by: Arnd Bergmann [mcgrof: squashed in depends on MMC=y suggested by Arnd] Signed-off-by: Luis Chamberlain

Input: ads7846 - Convert to use software nodes

2023-05-24T13:01:30+00:00

The Nokia 770 is using GPIOs from the global numberspace on the CBUS node to pass down to the LCD controller. This regresses when we let the OMAP GPIO driver use dynamic GPIO base. The Nokia 770 now has dynamic allocation of IRQ numbers, so this needs to be fixed for it to work. As this is the only user of LCD MIPID we can easily augment the driver to use a GPIO descriptor instead and resolve the issue. The platform data .shutdown() callback wasn't even used in the code, but we encode a shutdown asserting RESET in the remove() callback for completeness sake. The CBUS also has the ADS7846 touchscreen attached. Populate the devices on the Nokia 770 CBUS I2C using software nodes instead of platform data quirks. This includes the LCD and the ADS7846 touchscreen so the conversion just brings the LCD along with it as software nodes is an all-or-nothing design pattern. The ADS7846 has some limited support for using GPIO descriptors, let's convert it over completely to using device properties and then fix all remaining boardfile users to provide all platform data using software nodes. Dump the of includes and of_match_ptr() in the ADS7846 driver as part of the job. Since we have to move ADS7846 over to obtaining the GPIOs it is using exclusively from descriptors, we provide descriptor tables for the two remaining in-kernel boardfiles using ADS7846: - PXA Spitz - MIPS Alchemy DB1000 development board It was too hard for me to include software node conversion of these two remaining users at this time: the spitz is using a hscync callback in the platform data that would require further GPIO descriptor conversion of the Spitz, and moving the hsync callback down into the driver: it will just become too big of a job, but it can be done separately. The MIPS Alchemy DB1000 is simply something I cannot test, so take the easier approach of just providing some GPIO descriptors in this case as I don't want the patch to grow too intrusive. As we see that several device trees have incorrect polarity flags and just expect to bypass the gpiolib polarity handling, fix up all device trees too, in a separate patch. Suggested-by: Dmitry Torokhov Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base") Acked-by: Dmitry Torokhov Reviewed-by: Dmitry Torokhov Signed-off-by: Linus Walleij

MIPS: Alchemy: devboards: Remove duplicate 'the' in two places.

2022-07-05T09:11:36+00:00

file: ./arch/mips/alchemy/devboards/pm.c line: 20 * sources and configure the timeout after which the the TOYMATCH2 irq changed to * sources and configure the timeout after which the TOYMATCH2 irq Signed-off-by: Jiang Jian Signed-off-by: Thomas Bogendoerfer

Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops

2022-05-07T20:55:48+00:00

Now that we are using oneshot threaded IRQ this method is not used anymore. Signed-off-by: Dmitry Torokhov [arnd: add the db1300 change as well] Cc: Manuel Lauss Signed-off-by: Arnd Bergmann

MIPS: Fix fall-through warnings for Clang

2021-10-13T19:47:42+00:00

Fix the following fallthrough warnings: arch/mips/alchemy/devboards/db1550.c:69:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] case BCSR_WHOAMI_DB1550: ^ arch/mips/alchemy/devboards/db1550.c:69:2: note: insert 'break;' to avoid fall-through case BCSR_WHOAMI_DB1550: ^ break; arch/mips/kernel/uprobes.c:176:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] default: ^ arch/mips/kernel/uprobes.c:176:2: note: insert 'break;' to avoid fall-through default: ^ break; This helps with the ongoing efforts to globally enable -Wimplicit-fallthrough for Clang. Link: https://github.com/KSPP/linux/issues/115 Link: https://lore.kernel.org/linux-mm/202109030839.t2llsvmc-lkp@intel.com/ Link: https://lore.kernel.org/linux-mm/202108271617.MHxFd8aX-lkp@intel.com/ Reported-by: kernel test robot Signed-off-by: Gustavo A. R. Silva

MIPS: Alchemy: Fix spelling contraction "cant" -> "can't"

2021-07-29T09:41:05+00:00

There is a spelling mistake in a pr_warn message. Fix it. Signed-off-by: Colin Ian King Signed-off-by: Thomas Bogendoerfer