kernel/linux.git/arch/m68k/mac/macints.c, branch v6.18.22

m68k: Add common forward declaration for show_registers()

2022-07-12T08:48:21+00:00

There are several forward declarations for show_registers() in C source files. Replace these by a single common forward declaration in , and include where needed. Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Vivier Link: https://lore.kernel.org/r/d5b6a7f9af3e82f0ccb67edac09d9ee45d457932.1657114791.git.geert@linux-m68k.org

m68k: mac: Remove forward declaration for mac_nmi_handler()

2022-07-12T08:48:21+00:00

Move mac_nmi_handler() before its caller, so its forward declaration can be dropped. While at it, make the function static, and absorb the variable in_nmi, which is only used inside the function. Signed-off-by: Geert Uytterhoeven Reviewed-by: Finn Thain Link: https://lore.kernel.org/r/fa48394ecba7c29a2da354d13c1017b37237f25b.1657114783.git.geert@linux-m68k.org

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:34+00:00

We are going to split out of , which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder file that just maps to to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

m68k/mac: Clean up interrupt debug macros and printk statements

2017-02-09T13:18:19+00:00

Mac interrupt code has been debugged. The Penguin deficiencies that still cause unhandled interrupts aren't fixable here. Besides, interrupts are fast and frequent and these printk statements were never really useful IMO. Remove them. Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven

m68k/mac: Remove SHUTUP_SONIC interrupt hack

2017-02-09T13:18:19+00:00

In macints.c there is some startup code which disables the SONIC interrupt in an attempt to avoid an unhandled slot interrupt, which would be fatal. This only works on those machines where the SONIC device is on-board. When the mac_sonic driver is built-in, there's little point in doing this, because the device will be initialized a few seconds later anyway. But when mac_sonic is a module, the window for an unhandled interrupt is longer. Either way, we've already run the gauntlet for 5 or 10 seconds by the time we get around to disabling this particular device. It's only by sheer luck that we got this far. Really, this is too little too late. The general problem of unhandled early interrupts also affects other devices on other models. There are better ways to resolve this problem. 1) When using the Penguin bootloader, boot Mac OS with extensions disabled (by holding down the shift key at startup or by use of the Extensions Manager control panel). The Penguin docs already contain this advice, as it is always effective. 2) Have the Penguin bootloader disable the device. It already attempts to disable slot interrupts. But since some hardware cannot mask slot interrupts, Penguin should probably close the relevant device drivers. 3) Use Emile instead of Penguin. AFAIK the boot ROM never enables network device interrupts and hence they don't need to be disabled. Remove this hack. It requires maintenance and it doesn't solve the problem. It improves the odds for a few models, but so does setting CONFIG_MAC_SONIC=y. Signed-off-by: Finn Thain Reviewed-by: Laurent Vivier Signed-off-by: Geert Uytterhoeven

m68k/mac: Improve NMI handler

2017-02-09T13:18:18+00:00

mac_nmi_handler() is useless in its present form and locks up my PowerBook 180. Let's throw out the dead code and make it do something useful: print a register dump and a stack trace. mac_debug_handler() is also dead code. Remove it along with its static data. Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven

m68k/mac: Kill psc_present

2015-11-23T08:58:30+00:00

The presence of the Apple Peripheral System Controller (PSC) can be tested for by just checking its base address pointer. Signed-off-by: Geert Uytterhoeven

m68k/mac: oss irq fixes

2011-12-10T18:52:47+00:00

The IOP driver calls into the OSS driver to enable its IRQ. This undesirable coupling between drivers only exists because the OSS driver doesn't correctly handle all of its machspec IRQs. Fix OSS handling of enable/disable for VIA1 IRQs (8 thru 15) which includes MAC_IRQ_ADB. Back when I implemented pmac_zilog support I redefined IRQ_MAC_SCC incorrectly. Change this to a machspec IRQ so that it works on OSS. Clean up the unused OSS audio IRQ and OSS_IRQLEV_* cruft that only confuses things. Fix the OSS description in macints.c and remove an obsolete comment. Don't enable the VIA1 irq before registering the handler. Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven

m68k/mac: fix nubus slot irq disable and shutdown

2011-12-10T18:52:47+00:00

Improve NuBus slot interrupt handling code and documentation. This patch fixes the NuBus NIC (mac8390) in my Quadra 700. Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven