kernel/linux.git/arch/m68k/coldfire, branch linux-4.16.y

m68k: set dma and coherent masks for platform FEC ethernets

2018-05-30T06:17:26+00:00

[ Upstream commit f61e64310b75733d782e930d1fb404b84699eed6 ] As of commit 205e1b7f51e4 ("dma-mapping: warn when there is no coherent_dma_mask") the Freescale FEC driver is issuing the following warning on driver initialization on ColdFire systems: WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 0x40159e20 Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc7-dirty #4 Stack from 41833dd8: 41833dd8 40259c53 40025534 40279e26 00000003 00000000 4004e514 41827000 400255de 40244e42 00000204 40159e20 00000009 00000000 00000000 4024531d 40159e20 40244e42 00000204 00000000 00000000 00000000 00000007 00000000 00000000 40279e26 4028d040 40226576 4003ae88 40279e26 418273f6 41833ef8 7fffffff 418273f2 41867028 4003c9a2 4180ac6c 00000004 41833f8c 4013e71c 40279e1c 40279e26 40226c16 4013ced2 40279e26 40279e58 4028d040 00000000 Call Trace: [<40025534>] 0x40025534 [<4004e514>] 0x4004e514 [<400255de>] 0x400255de [<40159e20>] 0x40159e20 [<40159e20>] 0x40159e20 It is not fatal, the driver and the system continue to function normally. As per the warning the coherent_dma_mask is not set on this device. There is nothing special about the DMA memory coherency on this hardware so we can just set the mask to 32bits in the platform data for the FEC ethernet devices. Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

m68k: add Sysam stmark2 open board support

2017-11-07T03:27:38+00:00

Add support for Sysam stmark2 board, an open hardware embedded Linux board, see http://sysam.it/cff_stmark2.html for any info. Signed-off-by: Angelo Dureghello Signed-off-by: Greg Ungerer

m68k: coldfire: add dspi0 module support

2017-11-07T03:27:32+00:00

This patch adds initial module base address and irq for dspi0. It also defines the dspi0 clock to be used by the Freescale driver. Signed-off-by: Angelo Dureghello Signed-off-by: Greg Ungerer

m68k: move coldfire MMU initialization code

2017-11-05T22:25:20+00:00

The M54[78]x ColdFire parts are not the only members of the ColdFire family that have an MMU. But currently some of the early MMU initialization code is inside the startup code specific to only the ColdFire M54[78]x parts. Move that early ColdFire MMU init code so that it is run for other ColdFire parts running with MMU enabled. Specifically this means that the MMU initialization code will now also be run for the ColdFire M5441x parts when running with MMU enabled. The code move meant that the extern definition for the mmu_context_init() function had to be moved as well. To make it clear that is ColdFire specific I have renamed that with a "cf_" in front of it and put its extern definition in the mcfmmu.h (which is already included by the setup code). Reported-by: Angelo Dureghello Tested-by: Angelo Dureghello Signed-off-by: Greg Ungerer

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

2017-09-11T04:07:39+00:00

Pull m68knommu updates from Greg Ungerer: "Only two changes. One removes unused code, the other makes local clock code arguments consistent with generic clock code" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: remove dead code m68k: allow NULL clock for clk_get_rate

m68knommu: remove dead code

2017-08-28T00:40:30+00:00

As CONFIG_RTC_DRV_M5441x doesn't exist because the driver never made it upstream, there is no device to register. Remove code that is never compiled and init_BSP() as it doesn't do anything. Signed-off-by: Alexandre Belloni Signed-off-by: Greg Ungerer

m68k: allow NULL clock for clk_get_rate

2017-08-28T00:40:30+00:00

Make the behaviour of clk_get_rate consistent with common clk's clk_get_rate by accepting NULL clocks as parameter. Some device drivers rely on this, and will cause an OOPS otherwise. Fixes: facdf0ed4f59 ("m68knommu: introduce basic clk infrastructure") Cc: Greg Ungerer Cc: Geert Uytterhoeven Cc: linux-m68k@lists.linux-m68k.org Cc: linux-kernel@vger.kernel.org Reported-by: Mathias Kresin Signed-off-by: Jonas Gorski Signed-off-by: Greg Ungerer

m68k/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks

2017-08-03T21:26:29+00:00

The pci_fixup_irqs() function allocates IRQs for all PCI devices present in a system; those PCI devices possibly belong to different PCI bus trees (and possibly rooted at different host bridges) and may well be enabled (ie probed and bound to a driver) by the time pci_fixup_irqs() is called when probing a given host bridge driver. Furthermore, current kernel code relying on pci_fixup_irqs() to assign legacy PCI IRQs to devices does not work at all for hotplugged devices in that the code carrying out the IRQ fixup is called at host bridge driver probe time, which just cannot take into account devices hotplugged after the system has booted. The introduction of map/swizzle function hooks in struct pci_host_bridge allows us to define per-bridge map/swizzle functions that can be used at device probe time in PCI core code to allocate IRQs for a given device (through pci_assign_irq()). Convert PCI host bridge initialization code to the pci_scan_root_bus_bridge() API (that allows to pass a struct pci_host_bridge with initialized map/swizzle pointers) and remove the pci_fixup_irqs() call from arch code. Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Cc: Geert Uytterhoeven

m68k: coldfire: move inline before return type

2017-07-12T23:26:04+00:00

Make the code like the rest of the kernel. Link: http://lkml.kernel.org/r/14db9c166d5b68efa77e337cfe49bb9b29bca3f7.1499284835.git.joe@perches.com Signed-off-by: Joe Perches Acked-by: Greg Ungerer Cc: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds