kernel/linux.git/arch/m68k/atari, branch linux-5.9.y

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

mm: don't include asm/pgtable.h if linux/mm.h is already included

2020-06-09T16:39:13+00:00

Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include in the files that include . The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include ") ; do sed -i -e '/include / d' $f done Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Brian Cain Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Ley Foon Tan Cc: Mark Salter Cc: Matthew Wilcox Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Mike Rapoport Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Tony Luck Cc: Vincent Chen Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds

m68k/atari: Convert Falcon IDE drivers to platform drivers

2019-11-18T09:18:59+00:00

Autoloading of Falcon IDE driver modules requires converting these drivers to platform drivers. Add platform device for Falcon IDE interface in Atari platform setup code. Use this in the pata_falcon driver in place of the simple platform device set up on the fly. Convert falconide driver to use the same platform device that is used by pata_falcon also. (With the introduction of a platform device for the Atari Falcon IDE interface, the old Falcon IDE driver no longer loads (resource already claimed by the platform device)). Tested (as built-in driver) on my Atari Falcon. Signed-off-by: Michael Schmitz Acked-by: Bartlomiej Zolnierkiewicz Link: https://lore.kernel.org/r/1573008449-8226-1-git-send-email-schmitzmic@gmail.com Signed-off-by: Geert Uytterhoeven

m68k: atari: Rename shifter to shifter_st to avoid conflict

2019-08-19T11:24:10+00:00

When test-compiling the BCM2835 pin control driver on m68k: In file included from arch/m68k/include/asm/io_mm.h:32:0, from arch/m68k/include/asm/io.h:8, from include/linux/io.h:13, from include/linux/irq.h:20, from include/linux/gpio/driver.h:7, from drivers/pinctrl/bcm/pinctrl-bcm2835.c:17: drivers/pinctrl/bcm/pinctrl-bcm2835.c: In function 'bcm2711_pull_config_set': arch/m68k/include/asm/atarihw.h:190:22: error: expected identifier or '(' before 'volatile' # define shifter ((*(volatile struct SHIFTER *)SHF_BAS)) "shifter" is a too generic name for a global definition. As the corresponding definition for Atari TT is already called "shifter_tt", fix this by renaming the definition for Atari ST to "shifter_st". Reported-by: kbuild test robot Suggested-by: Michael Schmitz Signed-off-by: Geert Uytterhoeven Reviewed-by: Linus Walleij

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

m68k: atari: Convert to clocksource API

2019-03-25T09:22:24+00:00

Add a platform clocksource by adapting the existing arch_gettimeoffset implementation. Normally the MFP timer C interrupt flag would be used to check for timer counter wrap-around. Unfortunately, that flag gets cleared by the MFP itself (due to automatic End-of-Interrupt mode). This means that mfp_timer_c_handler() and atari_read_clk() must race when accounting for counter wrap-around. That problem is avoided by effectively stopping the clock when it might otherwise jump backwards (due to interrupt latency). Note that this may affect clock accuracy. After the timer interrupt is asserted, wait for the counter to be reloaded so that atari_read_clk() will not see the intermediate state as that would cause the clock to jump backwards. Signed-off-by: Finn Thain Acked-by: Linus Walleij Tested-by: Michael Schmitz Signed-off-by: Geert Uytterhoeven

m68k: Drop ARCH_USES_GETTIMEOFFSET

2019-03-25T09:22:24+00:00

The functions that implement arch_gettimeoffset are re-used by new clocksource drivers in subsequent patches. Signed-off-by: Finn Thain Acked-by: Linus Walleij Signed-off-by: Geert Uytterhoeven

m68k: Call timer_interrupt() with interrupts disabled

2019-03-25T09:22:24+00:00

Some platforms execute their timer handler with the interrupt priority level set below 6. That means the handler could be interrupted by another driver and this could lead to re-entry of the timer core. Avoid this by use of local_irq_save/restore for timer interrupt dispatch. This provides mutual exclusion around the timer interrupt flag access which is needed later in this series for the clocksource conversion. Reported-by: Thomas Gleixner Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1811131407120.2697@nanos.tec.linutronix.de Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven

treewide: add checks for the return value of memblock_alloc*()

2019-03-12T17:04:02+00:00

Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport Signed-off-by: Anders Roxell Reviewed-by: Guo Ren [c-sky] Acked-by: Paul Burton [MIPS] Acked-by: Heiko Carstens [s390] Reviewed-by: Juergen Gross [Xen] Reviewed-by: Geert Uytterhoeven [m68k] Acked-by: Max Filippov [xtensa] Cc: Catalin Marinas Cc: Christophe Leroy Cc: Christoph Hellwig Cc: "David S. Miller" Cc: Dennis Zhou Cc: Greentime Hu Cc: Greg Kroah-Hartman Cc: Guan Xuetao Cc: Guo Ren Cc: Mark Salter Cc: Matt Turner Cc: Michael Ellerman Cc: Michal Simek Cc: Petr Mladek Cc: Richard Weinberger Cc: Rich Felker Cc: Rob Herring Cc: Rob Herring Cc: Russell King Cc: Stafford Horne Cc: Tony Luck Cc: Vineet Gupta Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2019-03-06T22:18:59+00:00

Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver patch pull request for 5.1-rc1. The largest thing by far is the new habanalabs driver for their AI accelerator chip. For now it is in the drivers/misc directory but will probably move to a new directory soon along with other drivers of this type. Other than that, just the usual set of individual driver updates and fixes. There's an "odd" merge in here from the DRM tree that they asked me to do as the MEI driver is starting to interact with the i915 driver, and it needed some coordination. All of those patches have been properly acked by the relevant subsystem maintainers. All of these have been in linux-next with no reported issues, most for quite some time" * tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits) habanalabs: adjust Kconfig to fix build errors habanalabs: use %px instead of %p in error print habanalabs: use do_div for 64-bit divisions intel_th: gth: Fix an off-by-one in output unassigning habanalabs: fix little-endian<->cpu conversion warnings habanalabs: use NULL to initialize array of pointers habanalabs: fix little-endian<->cpu conversion warnings habanalabs: soft-reset device if context-switch fails habanalabs: print pointer using %p habanalabs: fix memory leak with CBs with unaligned size habanalabs: return correct error code on MMU mapping failure habanalabs: add comments in uapi/misc/habanalabs.h habanalabs: extend QMAN0 job timeout habanalabs: set DMA0 completion to SOB 1007 habanalabs: fix validation of WREG32 to DMA completion habanalabs: fix mmu cache registers init habanalabs: disable CPU access on timeouts habanalabs: add MMU DRAM default page mapping habanalabs: Dissociate RAZWI info from event types misc/habanalabs: adjust Kconfig to fix build errors ...