kernel/linux.git/arch/arm64, branch linux-5.9.y

arm64: tegra: Disable the ACONNECT for Jetson TX2

2020-12-16T09:58:33+00:00

[ Upstream commit fb319496935b7475a863a00c76895e8bb3216704 ] Commit ff4c371d2bc0 ("arm64: defconfig: Build ADMA and ACONNECT driver") enable the Tegra ADMA and ACONNECT drivers and this is causing resume from system suspend to fail on Jetson TX2. Resume is failing because the ACONNECT driver is being resumed before the BPMP driver, and the ACONNECT driver is attempting to power on a power-domain that is provided by the BPMP. While a proper fix for the resume sequencing problem is identified, disable the ACONNECT for Jetson TX2 temporarily to avoid breaking system suspend. Please note that ACONNECT driver is used by the Audio Processing Engine (APE) on Tegra, but because there is no mainline support for APE on Jetson TX2 currently, disabling the ACONNECT does not disable any useful feature at the moment. Signed-off-by: Jon Hunter Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

sched/idle: Fix arch_cpu_idle() vs tracing

2020-12-16T09:58:32+00:00

[ Upstream commit 58c644ba512cfbc2e39b758dd979edd1d6d00e27 ] We call arch_cpu_idle() with RCU disabled, but then use local_irq_{en,dis}able(), which invokes tracing, which relies on RCU. Switch all arch_cpu_idle() implementations to use raw_local_irq_{en,dis}able() and carefully manage the lockdep,rcu,tracing state like we do in entry. (XXX: we really should change arch_cpu_idle() to not return with interrupts enabled) Reported-by: Sven Schnelle Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Mark Rutland Tested-by: Mark Rutland Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org Signed-off-by: Sasha Levin

arm64: dts: broadcom: clear the warnings caused by empty dma-ranges

2020-12-16T09:58:30+00:00

[ Upstream commit 2013a4b684b6eb614ee5c9a3c07b0ae6f5ca96d9 ] The scripts/dtc/checks.c requires that the node have empty "dma-ranges" property must have the same "#address-cells" and "#size-cells" values as the parent node. Otherwise, the following warnings is reported: arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi:7.3-14: Warning \ (dma_ranges_format): /usb:dma-ranges: empty "dma-ranges" property but \ its #address-cells (1) differs from / (2) arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi:7.3-14: Warning \ (dma_ranges_format): /usb:dma-ranges: empty "dma-ranges" property but \ its #size-cells (1) differs from / (2) Arnd Bergmann figured out why it's necessary: Also note that the #address-cells=<1> means that any device under this bus is assumed to only support 32-bit addressing, and DMA will have to go through a slow swiotlb in the absence of an IOMMU. Suggested-by: Arnd Bergmann Signed-off-by: Zhen Lei Link: https://lore.kernel.org/r/20201016090833.1892-2-thunder.leizhen@huawei.com' Acked-by: Florian Fainelli Signed-off-by: Arnd Bergmann Signed-off-by: Sasha Levin

arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.

2020-12-16T09:58:30+00:00

[ Upstream commit 7327c8b98e2e14c47021eea14d1ab268086a6408 ] After patch [1] SD-card becomes mmc1 and eMMC becomes mmc2. Correct trigger of LEDs accordingly. [1] https://patchwork.kernel.org/patch/11881427 Signed-off-by: Markus Reichl Link: https://lore.kernel.org/r/20201104192933.1001-1-m.reichl@fivetechno.de Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin

arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.

2020-12-16T09:58:30+00:00

[ Upstream commit 0011c6d182774fc781fb9e115ebe8baa356029ae ] Recently introduced async probe on mmc devices can shuffle block IDs. Pin them to fixed values to ease booting in environments where UUIDs are not practical. Use newly introduced aliases for mmcblk devices from [1]. [1] https://patchwork.kernel.org/patch/11747669/ Signed-off-by: Markus Reichl Reviewed-by: Douglas Anderson Link: https://lore.kernel.org/r/20201104162356.1251-1-m.reichl@fivetechno.de Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin

arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance

2020-12-16T09:58:29+00:00

[ Upstream commit 01fe332800d0d2f94337b45c1973f4cf28ae6195 ] This fixes a poweroff issue when this is supposed to happen via PSCI. Signed-off-by: Maciej Matuszczyk Link: https://lore.kernel.org/r/20201023181629.119727-1-maccraft123mc@gmail.com Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin

arm64: tegra: Wrong AON HSP reg property size

2020-12-02T07:51:58+00:00

[ Upstream commit 1741e18737948c140ccc4cc643e8126d95ee6e79 ] The AON HSP node's "reg" property size 0xa0000 will overlap with other resources. This patch fixes that wrong value with correct size 0x90000. Reviewed-by: Mikko Perttunen Signed-off-by: Dipen Patel Fixes: a38570c22e9d ("arm64: tegra: Add nodes for TCU on Tegra194") Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()

2020-12-02T07:51:47+00:00

commit ff1712f953e27f0b0718762ec17d0adb15c9fd0b upstream. With hardware dirty bit management, calling pte_wrprotect() on a writable, dirty PTE will lose the dirty state and return a read-only, clean entry. Move the logic from ptep_set_wrprotect() into pte_wrprotect() to ensure that the dirty bit is preserved for writable entries, as this is required for soft-dirty bit management if we enable it in the future. Cc: Fixes: 2f4b829c625e ("arm64: Add support for hardware updates of the access and dirty pte bits") Reviewed-by: Catalin Marinas Link: https://lore.kernel.org/r/20201120143557.6715-3-will@kernel.org Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

arm64: pgtable: Fix pte_accessible()

2020-12-02T07:51:47+00:00

commit 07509e10dcc77627f8b6a57381e878fe269958d3 upstream. pte_accessible() is used by ptep_clear_flush() to figure out whether TLB invalidation is necessary when unmapping pages for reclaim. Although our implementation is correct according to the architecture, returning true only for valid, young ptes in the absence of racing page-table modifications, this is in fact flawed due to lazy invalidation of old ptes in ptep_clear_flush_young() where we elide the expensive DSB instruction for completing the TLB invalidation. Rather than penalise the aging path, adjust pte_accessible() to return true for any valid pte, even if the access flag is cleared. Cc: Fixes: 76c714be0e5e ("arm64: pgtable: implement pte_accessible()") Reported-by: Yu Zhao Acked-by: Yu Zhao Reviewed-by: Minchan Kim Reviewed-by: Catalin Marinas Link: https://lore.kernel.org/r/20201120143557.6715-2-will@kernel.org Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1

2020-12-02T07:51:47+00:00

commit f24a2acc15bcc7bbd295f9759efc873b88fbe429 upstream. USB host mode is broken on the OTG port of Jetson TX1 platform because the USB_VBUS_EN0 regulator (regulator@11) is being overwritten by the vdd-cam-1v2 regulator. This commit rearranges USB_VBUS_EN0 to be regulator@14. Fixes: 257c8047be44 ("arm64: tegra: jetson-tx1: Add camera supplies") Cc: stable@vger.kernel.org Signed-off-by: JC Kuo Reviewed-by: Jon Hunter Signed-off-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman