kernel/linux.git/arch/arm64/boot, branch v6.6.132

arm64: dts: imx8mn-tqma8mqnl: fix LDO5 power off

2026-04-02T11:07:29+00:00

commit 8adc841d43ebceabec996c9dcff6e82d3e585268 upstream. Fix SD card removal caused by automatic LDO5 power off after boot To prevent this, add vqmmc regulator for USDHC, using a GPIO-controlled regulator that is supplied by LDO5. Since this is implemented on SoM but used on baseboards with SD-card interface, implement the functionality on SoM part and optionally enable it on baseboards if needed. Signed-off-by: Markus Niebel Signed-off-by: Alexander Stein Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman

Revert "arm64: dts: qcom: sdm845-oneplus: Mark l14a regulator as boot-on"

2026-03-25T10:05:48+00:00

This reverts commit dc62cf0814fa62177bb4ba944c72d9f122568cdc. The backport applied regulator-boot-on to vreg_l12a_1p8 (ldo12) instead of vreg_l14a_1p88 (ldo14) due to identical surrounding context lines. Reported-by: Marco Mattiolo Signed-off-by: Sasha Levin

arm64: dts: rockchip: Fix rk356x PCIe range mappings

2026-03-25T10:05:35+00:00

[ Upstream commit f63ea193a404481f080ca2958f73e9f364682db9 ] The pcie bus address should be mapped 1:1 to the cpu side MMIO address, so that there is no same address allocated from normal system memory. Otherwise it's broken if the same address assigned to the EP for DMA purpose.Fix it to sync with the vendor BSP. Fixes: 568a67e742df ("arm64: dts: rockchip: Fix rk356x PCIe register and range mappings") Fixes: 66b51ea7d70f ("arm64: dts: rockchip: Add rk3568 PCIe2x1 controller") Cc: stable@vger.kernel.org Cc: Andrew Powers-Holmes Signed-off-by: Shawn Lin Link: https://patch.msgid.link/1767600929-195341-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin

arm64: dts: rockchip: Do not enable hdmi_sound node on Pinebook Pro

2026-03-04T12:21:10+00:00

[ Upstream commit b18247f9dab735c9c2d63823d28edc9011e7a1ad ] Remove the redundant enabling of the hdmi_sound node in the Pinebook Pro board dts file, because the HDMI output is unused on this device. [1][2] This change also eliminates the following kernel log warning, which is caused by the unenabled dependent node of hdmi_sound that ultimately results in the node's probe failure: platform hdmi-sound: deferred probe pending: asoc-simple-card: parse error [1] https://files.pine64.org/doc/PinebookPro/pinebookpro_v2.1_mainboard_schematic.pdf [2] https://files.pine64.org/doc/PinebookPro/pinebookpro_schematic_v21a_20220419.pdf Cc: stable@vger.kernel.org Fixes: 5a65505a69884 ("arm64: dts: rockchip: Add initial support for Pinebook Pro") Signed-off-by: Jun Yan Reviewed-by: Peter Robinson Reviewed-by: Dragan Simic Link: https://patch.msgid.link/20260116151253.9223-1-jerrysteve1101@gmail.com Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin

arm64: dts: apple: t8112-j473: Keep the HDMI port powered on

2026-03-04T12:21:05+00:00

[ Upstream commit 3e4e729325131fe6f7473a0673f7d8cdde53f5a0 ] Add the display controller and DPTX phy power-domains to the framebuffer node to keep the framebuffer and display out working after device probing finished. The OS has more control about the display pipeline used for the HDMI output on M2 based devices. The HDMI output is driven by an integrated DisplayPort to HDMI converter (Parade PS190). The DPTX phy is now controlled by the OS and no longer by firmware running on the display co-processor. This allows using the second display controller on the second USB type-c port or tunneling 2 DisplayPort connections over USB4/Thunderbolt. The m1n1 bootloader uses the second display controller to drive the HDMI output. Adjust for this difference compared to the notebooks as well. Fixes: 2d5ce3fbef32 ("arm64: dts: apple: t8112: Initial t8112 (M2) device trees") Cc: stable@vger.kernel.org Signed-off-by: Janne Grunau Link: https://patch.msgid.link/20260108-apple-dt-pmgr-fixes-v1-1-cfdce629c0a8@jannau.net Signed-off-by: Sven Peter Signed-off-by: Sasha Levin

arm64: tegra: smaug: Add usb-role-switch support

2026-03-04T12:20:37+00:00

[ Upstream commit dfa93788dd8b2f9c59adf45ecf592082b1847b7b ] The USB2 port on Smaug is configured for OTG operation but lacked the required 'usb-role-switch' property, leading to a failed probe and a non-functioning USB port. Add the property along with setting the default role to host. Signed-off-by: Diogo Ivo Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

arm64: dts: qcom: sm6115: Add CX_MEM/DBGC GPU regions

2026-03-04T12:19:38+00:00

[ Upstream commit 78c13dac18cf0e6f6cbc6ea85d4f967e6cca9562 ] Describe the GPU register regions, with the former existing but not being used much if at all on this silicon, and the latter containing various debugging levers generally related to dumping the state of the IP upon a crash. Fixes: 11750af256f8 ("arm64: dts: qcom: sm6115: Add GPU nodes") Reported-by: Krzysztof Kozlowski Closes: https://lore.kernel.org/linux-arm-msm/8a64f70b-8034-45e7-86a3-0015cf357132@oss.qualcomm.com/T/#m404f1425c36b61467760f058b696b8910340a063 Signed-off-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Reviewed-by: Akhil P Oommen Link: https://lore.kernel.org/r/20251229-topic-6115_2290_gpu_dbgc-v1-3-4a24d196389c@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

arm64: dts: qcom: sdm845-db845c: specify power for WiFi CH1

2026-03-04T12:19:38+00:00

[ Upstream commit c303e89f7f17c29981d09f8beaaf60937ae8b1f2 ] Specify power supply for the second chain / antenna output of the onboard WiFi chip. Fixes: 3f72e2d3e682 ("arm64: dts: qcom: Add Dragonboard 845c") Reviewed-by: Konrad Dybcio Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20260106-wcn3990-pwrctl-v2-8-0386204328be@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

arm64: dts: qcom: sdm845-db845c: drop CS from SPIO0

2026-03-04T12:19:38+00:00

[ Upstream commit 8bfb696ccdc5bcfad7a45b84c2c8a36757070e19 ] On SDM845 SPI uses hardware-provided chip select, while specifying cs-gpio makes the driver request GPIO pin, which on DB845c conflicts with the normal host controllers pinctrl entry. Drop the cs-gpios property to restore SPI functionality. Fixes: cb29e7106d4e ("arm64: dts: qcom: db845c: Add support for MCP2517FD") Reviewed-by: Konrad Dybcio Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20260106-wcn3990-pwrctl-v2-7-0386204328be@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

arm64: dts: amlogic: g12: assign the MMC A signal clock

2026-03-04T12:19:38+00:00

[ Upstream commit 3c941feaa363f1573a501452391ddf513394c84b ] The amlogic MMC driver operate with the assumption that MMC clock is configured to provide 24MHz. It uses this path for low rates such as 400kHz. Assign the clock to make sure it is properly configured Fixes: 8a6b3ca2d361 ("arm64: dts: meson: g12a: add SDIO controller") Signed-off-by: Jerome Brunet Reviewed-by: Neil Armstrong Link: https://patch.msgid.link/20260114-amlogic-mmc-clocks-followup-v1-6-a999fafbe0aa@baylibre.com Signed-off-by: Neil Armstrong Signed-off-by: Sasha Levin