kernel/linux.git/arch/arm64/boot, branch v6.18.33

arm64: dts: meson-gxl-p230: fix ethernet PHY interrupt number

2026-05-23T11:07:02+00:00

[ Upstream commit 174a0ef3b33434f475c87e66f37980e39b73805a ] Correct the interrupt number assigned to the Realtek PHY in the p230 following the same logic as commit 3106507e1004 ("ARM64: dts: meson-gxm: fix q200 interrupt number"),as reported in [PATCH 0/2] Ethernet PHY interrupt improvements [1]. [1] https://lore.kernel.org/all/20171202214037.17017-1-martin.blumenstingl@googlemail.com/ Fixes: b94d22d94ad2 ("ARM64: dts: meson-gx: add external PHY interrupt on some platforms") Signed-off-by: Jun Yan Reviewed-by: Martin Blumenstingl Link: https://patch.msgid.link/20260330145111.115318-1-jerrysteve1101@gmail.com Signed-off-by: Neil Armstrong Signed-off-by: Sasha Levin

arm64: dts: amlogic: meson-axg: Add missing cache information to cpu0

2026-05-23T11:07:02+00:00

[ Upstream commit 918273be0885362a9a00615b46e03f15f8b55667 ] Add missing L1 data and instruction cache parameters to the CPU node 0 for the Cortex-A53 caches on the Meson AXG SoC. Fixes: 3b6ad2a43367 ("arm64: dts: amlogic: Add cache information to the Amlogic AXG SoCS") Signed-off-by: Anand Moon Link: https://patch.msgid.link/20260219103548.18392-1-linux.amoon@gmail.com Signed-off-by: Neil Armstrong Signed-off-by: Sasha Levin

arm64: dts: marvell: armada-37xx: use 'usb2-phy' in USB3 controller's phy-names

2026-05-23T11:06:59+00:00

[ Upstream commit 0fef19844624f8bc07651b4d26088d8940affba3 ] Instead of the generic 'usb2-phy' name, the Armada 37xx device trees are using a custom 'usb2-utmi-otg-phy' name for the USB2 PHY in the USB3 controller node. Since commit 53a2d95df836 ("usb: core: add phy notify connect and disconnect"), this triggers a bug [1] in the USB core which causes double use of the USB3 PHY. Change the PHY name to 'usb2-phy' in the SoC and in the uDPU specific dtsi files in order to avoid triggering the bug and also to keep the names in line with the ones used by other platforms. Link: https://lore.kernel.org/r/20260330-usb-avoid-usb3-phy-double-use-v1-1-d2113aecb535@gmail.com # [1] Fixes: 53a2d95df836 ("usb: core: add phy notify connect and disconnect") Signed-off-by: Gabor Juhos Signed-off-by: Gregory CLEMENT Signed-off-by: Sasha Levin

arm64: dts: imx8mm-tqma8mqml: Correct PAD settings for PMIC_nINT

2026-05-23T11:06:59+00:00

[ Upstream commit 42a9f5a16328ed78a88e0498556965b6c6ec515c ] With commit 5d0efaf47ee90 ("regulator: pca9450: Correct interrupt type"), there might be interrupt storm for this board. Need to set PAD PUE and PU together to make pull up work properly. Fixes: dfcd1b6f7620e ("arm64: dts: freescale: add initial device tree for TQMa8MQML with i.MX8MM") Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Sasha Levin

arm64: dts: imx8mn-tqma8mqnl: Correct PAD settings for PMIC_nINT

2026-05-23T11:06:59+00:00

[ Upstream commit 0fb37990774113afd943eaa91323679388584b6d ] With commit 5d0efaf47ee90 ("regulator: pca9450: Correct interrupt type"), there might be interrupt storm for this board. Need to set PAD PUE and PU together to make pull up work properly. Fixes: 3e56e354db6d3 ("arm64: dts: freescale: add initial device tree for TQMa8MQNL with i.MX8MN") Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Sasha Levin

arm64: dts: imx8mm-emtop-som: Correct PAD settings for PMIC_nINT

2026-05-23T11:06:59+00:00

[ Upstream commit 721dec3ee9ff5231d13a412ff87df63b966d137b ] With commit 5d0efaf47ee90 ("regulator: pca9450: Correct interrupt type"), there might be interrupt storm for this board. Need to set PAD PUE and PU together to make pull up work properly. While at here, also correct interrupt type as IRQ_TYPE_LEVEL_LOW. Fixes: cbd3ef64eb9d1 ("arm64: dts: Add support for Emtop SoM & Baseboard") Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Sasha Levin

arm64: dts: imx8mp-data-modul-edm-sbc: Correct PAD settings for PMIC_nINT

2026-05-23T11:06:58+00:00

[ Upstream commit 8ff145577e93f312ff398cb950ee3bd44835f5be ] PMIC_nINT is low level triggered, but the current PAD settings is PE=0,PUE=0,FSEL_1_FAST_SLEW_RATE=1,SION=1. So PAD needs to be configured as PULL UP with PULL Enable, no need SION. Correct it. Fixes: 562d222f23f0f ("arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC") Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Sasha Levin

arm64: dts: imx8mp-dhcom-som: Correct PAD settings for PMIC_nINT

2026-05-23T11:06:58+00:00

[ Upstream commit f9ed5afc988da3e22543725e35be6addbb0497bc ] PMIC_nINT is low level triggered, but the current PAD settings is PE=0,PUE=0,FSEL_1_FAST_SLEW_RATE=1,SION=1. So PAD needs to be configured as PULL UP with PULL Enable, no need SION. Correct it. Fixes: 8d6712695bc8e ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2") Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Sasha Levin

arm64: dts: imx8mp-ultra-mach-sbc: Correct PAD settings for PMIC_nINT

2026-05-23T11:06:58+00:00

[ Upstream commit daaf41ee72fb5fad936e7051a015cccae9b33937 ] With commit 5d0efaf47ee90 ("regulator: pca9450: Correct interrupt type"), there might be interrupt storm for this board. Need to set PAD PUE and PU together to make pull up work properly. Fixes: d1c1400bd3b8b ("arm64: dts: imx8mp: Add initial support for Ultratronik imx8mp-ultra-mach-sbc board") Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Sasha Levin

arm64: dts: imx8mp-sr-som: Correct PAD settings for PMIC_nINT

2026-05-23T11:06:58+00:00

[ Upstream commit 695a476275cfb9c798a696aeaa43967701d5c78a ] With commit 5d0efaf47ee90 ("regulator: pca9450: Correct interrupt type"), there might be interrupt storm for this board. Need to set PAD PUE and PU together to make pull up work properly. Fixes: a009c0c66ecb4 ("arm64: dts: add description for solidrun imx8mp som and cubox-m") Signed-off-by: Peng Fan Reviewed-by: Josua Mayer Signed-off-by: Frank Li Signed-off-by: Sasha Levin