kernel/linux.git/arch/arm64/boot, branch v6.12.92

arm64: dts: meson-gxl-p230: fix ethernet PHY interrupt number

2026-05-23T11:04:50+00:00

[ Upstream commit 174a0ef3b33434f475c87e66f37980e39b73805a ] Correct the interrupt number assigned to the Realtek PHY in the p230 following the same logic as commit 3106507e1004 ("ARM64: dts: meson-gxm: fix q200 interrupt number"),as reported in [PATCH 0/2] Ethernet PHY interrupt improvements [1]. [1] https://lore.kernel.org/all/20171202214037.17017-1-martin.blumenstingl@googlemail.com/ Fixes: b94d22d94ad2 ("ARM64: dts: meson-gx: add external PHY interrupt on some platforms") Signed-off-by: Jun Yan Reviewed-by: Martin Blumenstingl Link: https://patch.msgid.link/20260330145111.115318-1-jerrysteve1101@gmail.com Signed-off-by: Neil Armstrong Signed-off-by: Sasha Levin

arm64: dts: marvell: armada-37xx: use 'usb2-phy' in USB3 controller's phy-names

2026-05-23T11:04:47+00:00

[ Upstream commit 0fef19844624f8bc07651b4d26088d8940affba3 ] Instead of the generic 'usb2-phy' name, the Armada 37xx device trees are using a custom 'usb2-utmi-otg-phy' name for the USB2 PHY in the USB3 controller node. Since commit 53a2d95df836 ("usb: core: add phy notify connect and disconnect"), this triggers a bug [1] in the USB core which causes double use of the USB3 PHY. Change the PHY name to 'usb2-phy' in the SoC and in the uDPU specific dtsi files in order to avoid triggering the bug and also to keep the names in line with the ones used by other platforms. Link: https://lore.kernel.org/r/20260330-usb-avoid-usb3-phy-double-use-v1-1-d2113aecb535@gmail.com # [1] Fixes: 53a2d95df836 ("usb: core: add phy notify connect and disconnect") Signed-off-by: Gabor Juhos Signed-off-by: Gregory CLEMENT Signed-off-by: Sasha Levin

arm64: dts: imx8mm-tqma8mqml: Correct PAD settings for PMIC_nINT

2026-05-23T11:04:47+00:00

[ Upstream commit 42a9f5a16328ed78a88e0498556965b6c6ec515c ] With commit 5d0efaf47ee90 ("regulator: pca9450: Correct interrupt type"), there might be interrupt storm for this board. Need to set PAD PUE and PU together to make pull up work properly. Fixes: dfcd1b6f7620e ("arm64: dts: freescale: add initial device tree for TQMa8MQML with i.MX8MM") Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Sasha Levin

arm64: dts: imx8mn-tqma8mqnl: Correct PAD settings for PMIC_nINT

2026-05-23T11:04:47+00:00

[ Upstream commit 0fb37990774113afd943eaa91323679388584b6d ] With commit 5d0efaf47ee90 ("regulator: pca9450: Correct interrupt type"), there might be interrupt storm for this board. Need to set PAD PUE and PU together to make pull up work properly. Fixes: 3e56e354db6d3 ("arm64: dts: freescale: add initial device tree for TQMa8MQNL with i.MX8MN") Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Sasha Levin

arm64: dts: imx8mm-emtop-som: Correct PAD settings for PMIC_nINT

2026-05-23T11:04:47+00:00

[ Upstream commit 721dec3ee9ff5231d13a412ff87df63b966d137b ] With commit 5d0efaf47ee90 ("regulator: pca9450: Correct interrupt type"), there might be interrupt storm for this board. Need to set PAD PUE and PU together to make pull up work properly. While at here, also correct interrupt type as IRQ_TYPE_LEVEL_LOW. Fixes: cbd3ef64eb9d1 ("arm64: dts: Add support for Emtop SoM & Baseboard") Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Sasha Levin

arm64: dts: imx8mp-data-modul-edm-sbc: Correct PAD settings for PMIC_nINT

2026-05-23T11:04:47+00:00

[ Upstream commit 8ff145577e93f312ff398cb950ee3bd44835f5be ] PMIC_nINT is low level triggered, but the current PAD settings is PE=0,PUE=0,FSEL_1_FAST_SLEW_RATE=1,SION=1. So PAD needs to be configured as PULL UP with PULL Enable, no need SION. Correct it. Fixes: 562d222f23f0f ("arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC") Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Sasha Levin

arm64: dts: imx8mp-dhcom-som: Correct PAD settings for PMIC_nINT

2026-05-23T11:04:47+00:00

[ Upstream commit f9ed5afc988da3e22543725e35be6addbb0497bc ] PMIC_nINT is low level triggered, but the current PAD settings is PE=0,PUE=0,FSEL_1_FAST_SLEW_RATE=1,SION=1. So PAD needs to be configured as PULL UP with PULL Enable, no need SION. Correct it. Fixes: 8d6712695bc8e ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2") Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Sasha Levin

arm64: dts: imx8mp-icore-mx8mp: Correct PAD settings for PMIC_nINT

2026-05-23T11:04:47+00:00

[ Upstream commit ea8c90f5c7ceeb6657a8fe564aa7b190dce298a6 ] With commit 5d0efaf47ee90 ("regulator: pca9450: Correct interrupt type"), there might be interrupt storm for this board. Need to set PAD PUE and PU together to make pull up work properly. Fixes: eefe06b295087 ("arm64: dts: imx8mp: Add Engicam i.Core MX8M Plus SoM") Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Sasha Levin

arm64: dts: imx8mp-navqp: Correct PAD settings for PMIC_nINT

2026-05-23T11:04:47+00:00

[ Upstream commit 741d6ac1a2a2e0f3e2cae5eef3516cdd75119e83 ] With commit 5d0efaf47ee90 ("regulator: pca9450: Correct interrupt type"), there will be interrupt storm for i.MX8MP NAVQP. Per schematic, there is no on board PULL-UP resistors for GPIO1_IO03, so need to set PAD PUE and PU together to make pull up work properly. Fixes: 682729a9d506d ("arm64: dts: freescale: Add device tree for Emcraft Systems NavQ+ Kit") Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Sasha Levin

arm64: dts: imx8mp-debix-som-a: Correct PAD settings for PMIC_nINT

2026-05-23T11:04:47+00:00

[ Upstream commit 2ea7872048a179b0ea8dadc67771961df3f0fc4a ] With commit 5d0efaf47ee90 ("regulator: pca9450: Correct interrupt type"), there is interrupt storm for i.MX8MP DEBIX SOM A. Need to set PAD PUE and PU together to make pull up work properly. Fixes: 21baf0b47f81b ("arm64: dts: freescale: Add DEBIX SOM A and SOM A I/O Board support") Reported-by: Laurent Pinchart Closes: https://lore.kernel.org/all/20260323105858.GA2185714@killaraus.ideasonboard.com/ Reported-by: Kieran Bingham Closes: https://lore.kernel.org/imx/20260324194353.GB2352505@killaraus.ideasonboard.com/T/#m9a07fdc75496369a7d76d52c5e34ed140dcabfe3 Signed-off-by: Peng Fan Reviewed-by: Kieran Bingham Signed-off-by: Frank Li Signed-off-by: Sasha Levin