kernel/linux.git/arch/arm64/boot, branch v6.1.175

arm64: dts: meson-gxl-p230: fix ethernet PHY interrupt number

2026-06-01T15:39:25+00:00

[ Upstream commit 174a0ef3b33434f475c87e66f37980e39b73805a ] Correct the interrupt number assigned to the Realtek PHY in the p230 following the same logic as commit 3106507e1004 ("ARM64: dts: meson-gxm: fix q200 interrupt number"),as reported in [PATCH 0/2] Ethernet PHY interrupt improvements [1]. [1] https://lore.kernel.org/all/20171202214037.17017-1-martin.blumenstingl@googlemail.com/ Fixes: b94d22d94ad2 ("ARM64: dts: meson-gx: add external PHY interrupt on some platforms") Signed-off-by: Jun Yan Reviewed-by: Martin Blumenstingl Link: https://patch.msgid.link/20260330145111.115318-1-jerrysteve1101@gmail.com Signed-off-by: Neil Armstrong Signed-off-by: Sasha Levin

arm64: dts: imx8mm-tqma8mqml: Correct PAD settings for PMIC_nINT

2026-06-01T15:39:22+00:00

[ Upstream commit 42a9f5a16328ed78a88e0498556965b6c6ec515c ] With commit 5d0efaf47ee90 ("regulator: pca9450: Correct interrupt type"), there might be interrupt storm for this board. Need to set PAD PUE and PU together to make pull up work properly. Fixes: dfcd1b6f7620e ("arm64: dts: freescale: add initial device tree for TQMa8MQML with i.MX8MM") Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Sasha Levin

arm64: dts: imx8mn-tqma8mqnl: Correct PAD settings for PMIC_nINT

2026-06-01T15:39:22+00:00

[ Upstream commit 0fb37990774113afd943eaa91323679388584b6d ] With commit 5d0efaf47ee90 ("regulator: pca9450: Correct interrupt type"), there might be interrupt storm for this board. Need to set PAD PUE and PU together to make pull up work properly. Fixes: 3e56e354db6d3 ("arm64: dts: freescale: add initial device tree for TQMa8MQNL with i.MX8MN") Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Sasha Levin

arm64: dts: imx8mp-dhcom-som: Correct PAD settings for PMIC_nINT

2026-06-01T15:39:22+00:00

[ Upstream commit f9ed5afc988da3e22543725e35be6addbb0497bc ] PMIC_nINT is low level triggered, but the current PAD settings is PE=0,PUE=0,FSEL_1_FAST_SLEW_RATE=1,SION=1. So PAD needs to be configured as PULL UP with PULL Enable, no need SION. Correct it. Fixes: 8d6712695bc8e ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2") Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Sasha Levin

arm64: dts: imx8mp-icore-mx8mp: Correct PAD settings for PMIC_nINT

2026-06-01T15:39:22+00:00

[ Upstream commit ea8c90f5c7ceeb6657a8fe564aa7b190dce298a6 ] With commit 5d0efaf47ee90 ("regulator: pca9450: Correct interrupt type"), there might be interrupt storm for this board. Need to set PAD PUE and PU together to make pull up work properly. Fixes: eefe06b295087 ("arm64: dts: imx8mp: Add Engicam i.Core MX8M Plus SoM") Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Sasha Levin

arm64: dts: qcom: sm8250: Add missing CPU7 3.09GHz OPP

2026-06-01T15:39:16+00:00

[ Upstream commit b683730e27ba4f91986c4c92f5cb7297f1e01a6d ] This resolves the following error seen on the ASUS ROG Phone 3: cpu cpu7: Voltage update failed freq=3091200 cpu cpu7: failed to update OPP for freq=3091200 Fixes: 8e0e8016cb79 ("arm64: dts: qcom: sm8250: Add CPU opp tables") Signed-off-by: Alexander Koskovich Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260307-sm8250-cpu7-opp-v1-1-435f5f6628a1@pm.me Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

arm64: dts: qcom: sdm845-xiaomi-beryllium: Mark l1a regulator as powered during boot

2026-06-01T15:39:15+00:00

[ Upstream commit 3b0dd81eea6b7a239fce456ce4545af76f1a9715 ] The regulator must be on, since it provides the display subsystem and therefore the bootloader had turned it on before Linux booted. Fixes: 77809cf74a8c ("arm64: dts: qcom: Add support for Xiaomi Poco F1 (Beryllium)") Signed-off-by: David Heidelberg Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260320-beryllium-booton-v2-1-931d1be21eae@ixit.cz Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

arm64: dts: qcom: sm8450: Enable UHS-I SDR50 and SDR104 SD card modes

2026-06-01T15:39:15+00:00

[ Upstream commit db0c5ef1abda6effdc5c85d6688fb6af2b351ae5 ] The reported problem of some non-working UHS-I speed modes on SM8450 originates in commit 0a631a36f724 ("arm64: dts: qcom: Add device tree for Sony Xperia 1 IV"), and then it was spread to all SM8450 powered platforms by commit 9d561dc4e5cc ("arm64: dts: qcom: sm8450: disable SDHCI SDR104/SDR50 on all boards"). The tests show that the rootcause of the problem was related to an overclocking of SD cards, and it's fixed later on by commit a27ac3806b0a ("clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs"). Since then both SDR50 and SDR104 speed modes are working fine on SM8450, tested on SM8450-HDK: SDR50 speed mode: mmc0: new UHS-I speed SDR50 SDHC card at address 0001 mmcblk0: mmc0:0001 00000 14.6 GiB mmcblk0: p1 % dd if=/dev/mmcblk0p1 of=/dev/null bs=1M count=1024 1024+0 records in 1024+0 records out 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 24.6254 s, 43.6 MB/s SDR104 speed mode: mmc0: new UHS-I speed SDR104 SDHC card at address 59b4 mmcblk0: mmc0:59b4 USDU1 28.3 GiB mmcblk0: p1 % dd if=/dev/mmcblk0p1 of=/dev/null bs=1M count=1024 1024+0 records in 1024+0 records out 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 12.3266 s, 87.1 MB/s Remove the restrictions on SD card speed modes from the SM8450 platform dtsi file and enable UHS-I speed modes. Fixes: 9d561dc4e5cc ("arm64: dts: qcom: sm8450: disable SDHCI SDR104/SDR50 on all boards") Reviewed-by: Neil Armstrong Reviewed-by: Konrad Dybcio Signed-off-by: Vladimir Zapolskiy Link: https://lore.kernel.org/r/20260314023715.357512-5-vladimir.zapolskiy@linaro.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

arm64: dts: qcom: sm8450: Fix GIC_ITS range length

2026-06-01T15:39:15+00:00

[ Upstream commit 14044fa192c50265bc1f636108371044bbdcf7b7 ] Currently, the GITS_SGIR register is cut off. Fix it up. Fixes: fc8b0b9b630d ("arm64: dts: qcom: sm8450 add ITS device tree node") Signed-off-by: Konrad Dybcio Reviewed-by: Neil Armstrong Reviewed-by: Abel Vesa Link: https://lore.kernel.org/r/20260317-topic-its_range_fixup-v1-3-49be8076adb1@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

arm64: dts: mediatek: mt7986a: Fix gpio-ranges pin count

2026-06-01T15:39:15+00:00

[ Upstream commit 820ed0c1a13c5fafb36232538d793f99a0986ef3 ] The gpio-ranges in the MT7986A pinctrl node were incorrectly defined, therefore, pin 100 cannot be used. Correct the range count to match the driver. Fixes: c3a064a32ed9 ("arm64: dts: mediatek: add pinctrl support for mt7986a") Signed-off-by: Akari Tsuyukusa Signed-off-by: AngeloGioacchino Del Regno Signed-off-by: Sasha Levin