kernel/linux.git/arch/arm64/boot/dts, branch v6.3

Merge tag 'qcom-arm64-fixes-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

2023-04-14T11:52:48+00:00

A few more Qualcomm ARM64 DeviceTree fixes for 6.3 The GPIO polarity of the WSA881x shutdown GPIO was inconsistent and had to be corrected in the driver, this fixes the polarity in the DeviceTree for QRB5165 RB5, SM8250 MTP, Samsung Galaxy Book 2 and Lenovo Yoga C630. The recent rearrangement of nodes among the IPQ8074 accidentally enabled the PCIe PHYs, rather than the PCIe controllers. This is being corrected, to restore PCIe functionality. PMK8280 PON node has the wrong compatible, which recently caused the driver to stop probing. This is corrected and the required "pbs" region is added. With support for HBR3 introduced, it's noted that SC7280 Herobrine devices are having trouble running at this rate. This drops the claim that it's supported, until further analysis can be done. * tag 'qcom-arm64-fixes-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers arm64: dts: qcom: ipq8074-hk10: enable QMP device, not the PHY node arm64: dts: qcom: ipq8074-hk01: enable QMP device, not the PHY node arm64: dts: qcom: qrb5165-rb5: Use proper WSA881x shutdown GPIO polarity arm64: dts: qcom: sm8250-mtp: Use proper WSA881x shutdown GPIO polarity arm64: dts: qcom: sdm850-samsung-w737: Use proper WSA881x shutdown GPIO polarity arm64: dts: qcom: sdm850-lenovo-yoga-c630: Use proper WSA881x shutdown GPIO polarity Link: https://lore.kernel.org/r/20230410153850.4752-1-andersson@kernel.org Signed-off-by: Arnd Bergmann

Merge tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes

2023-04-14T11:51:43+00:00

Lower sd card speeds for two boards to make them run more reliable, missing 32k clock definition for Anbric xx3 devices, missing cache-levels for rk3588, fixed rk3326-board display supplies and more dt-schema fixes. * tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: correct panel supplies on some rk3326 boards arm64: dts: rockchip: use just "port" in panel on RockPro64 arm64: dts: rockchip: use just "port" in panel on Pinebook Pro arm64: dts: rockchip: Remove non-existing pwm-delay-us property arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices arm64: dts: rockchip: add rk3588 cache level information arm64: dts: rockchip: Lower SD card speed on rk3399 Pinebook Pro arm64: dts: rockchip: Lower sd speed on rk3566-soquartz ARM: dts: rockchip: fix a typo error for rk3288 spdif node arm64: dts: rockchip: Fix rk3399 GICv3 ITS node name Link: https://lore.kernel.org/r/10559306.CDJkKcVGEf@phil Signed-off-by: Arnd Bergmann

arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards

2023-04-07T16:26:37+00:00

There are some interop issues seen across a few DP monitors with HBR3 and herobrine boards where the DP display stays blank with hbr3. This is still under investigation but in preparation for supporting higher resolutions, its better to disable HBR3 till the issues are root-caused as there is really no guarantee which monitors will show the issue and which would not. This can be enabled back after successful validation across more DP sinks. Signed-off-by: Abhinav Kumar Reviewed-by: Douglas Anderson Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20230329233416.27152-1-quic_abhinavk@quicinc.com

Merge tag 'imx-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

2023-04-06T08:18:41+00:00

i.MX fixes for 6.3, 2nd round: - Fix 'reg' address length for i.MX8MP LCDIF2 device. - A couple of changes from Fabio Estevam to fix DTC warnings caused unnecessary address/size cells. - Re-enable PCI driver support in imx_v6_v7_defconfig. - Fix PMIC clock source property for imx8mm-evk board. - A couple of fixes from Peng Fan to correct off-on delay property for i.MX8 Verdin boards. * tag 'imx-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells arm64: dts: imx8mp-verdin: correct off-on-delay arm64: dts: imx8mm-verdin: correct off-on-delay arm64: dts: imx8mm-evk: correct pmic clock source arm64: dts: imx8mp: fix address length for LCDIF2 Link: https://lore.kernel.org/r/20230406021602.GP11367@dragon Signed-off-by: Arnd Bergmann

arm64: dts: rockchip: correct panel supplies on some rk3326 boards

2023-04-05T17:38:03+00:00

The Anbernic and Odroid Go have different panels and take differently named supplies, so move all the supplies to DTS defining actual panel to fix warnings like: rk3326-odroid-go3.dtb: panel@0: 'IOVCC-supply' is a required property rk3326-odroid-go3.dtb: panel@0: 'iovcc-supply', 'vdd-supply' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20230326204520.80859-1-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner

arm64: dts: rockchip: use just "port" in panel on RockPro64

2023-04-05T17:36:49+00:00

The panel bindings expect to have only one port, thus they do not allow to use "ports" node: rk3399-rockpro64.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' There is only one endpoint, so use simpler form without "reg". Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20230326204520.80859-3-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner

arm64: dts: rockchip: use just "port" in panel on Pinebook Pro

2023-04-05T17:36:49+00:00

The panel bindings expect to have only one port, thus they do not allow to use "ports" node: rk3399-pinebook-pro.dtb: edp-panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20230326204520.80859-2-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner

arm64: dts: imx8mp-verdin: correct off-on-delay

2023-04-05T14:24:23+00:00

The property should be off-on-delay-us, not off-on-delay Fixes: a39ed23bdf6e ("arm64: dts: freescale: add initial support for verdin imx8m plus") Signed-off-by: Peng Fan Signed-off-by: Shawn Guo

arm64: dts: imx8mm-verdin: correct off-on-delay

2023-04-05T14:24:15+00:00

The property should be off-on-delay-us, not off-on-delay Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini") Signed-off-by: Peng Fan Signed-off-by: Shawn Guo

arm64: dts: imx8mm-evk: correct pmic clock source

2023-04-05T13:21:56+00:00

The osc_32k supports #clock-cells as 0, using an id is wrong, drop it. Fixes: a6a355ede574 ("arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC") Signed-off-by: Peng Fan Reviewed-by: Marco Felsch Signed-off-by: Shawn Guo