kernel/linux.git/arch/arm/mach-versatile, branch linux-6.12.y

Merge tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2024-09-17T08:48:09+00:00

Pull SoC driver updates from Arnd Bergmann: "The driver updates seem larger this time around, with changes is many of the SoC specific drivers, both the custom drivers/soc ones and the closely related subsystems (memory, bus, firmware, reset, ...). The at91 platform gains support for sam9x7 chips in the soc and power management code. This is the latest variant of one of the oldest still supported SoC families, using the ARM9 (ARMv5) core. As usual, the qualcomm snapdragon platform gets a ton of updates in many of their drivers to add more features and additional SoC support. Most of these are somewhat firmware related as the platform has a number of firmware based interfaces to the kernel. A notable addition here is the inclusion of trace events to two of these drivers. Herve Codina and Christophe Leroy are now sending updates for drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC and Arm specific platforms and has previously been problematic to maintain. The first update here contains support for newer PowerPC variants and some cleanups. The turris mox firmware driver has a number of updates, mostly cleanups. The Arm SCMI firmware driver gets a major rework to modularize the existing code into separately loadable drivers for the various transports, the addition of custom NXP i.MX9 interfaces and a number of smaller updates. The Arm FF-A firmware driver gets a feature update to support the v1.2 version of the specification. The reset controller drivers have some smaller cleanups and a newly added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs. The memory controller drivers get some cleanups and refactoring for Tegra, TI, Freescale/NXP and a couple more platforms. Finally there are lots of minor updates to firmware (raspberry pi, tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra, amlogic, mediatek) drivers and their DT bindings" * tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits) firmware: imx: remove duplicate scmi_imx_misc_ctrl_get() platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng() bus: sunxi-rsb: Simplify code with dev_err_probe() soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml soc: fsl: qbman: Remove redundant warnings soc: fsl: qbman: Use iommu_paging_domain_alloc() MAINTAINERS: Add QE files related to the Freescale QMC controller soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation soc: fsl: qe: Add missing PUSHSCHED command soc: fsl: qe: Add resource-managed muram allocators soc: fsl: cpm1: qmc: Introduce qmc_version soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC soc: fsl: cpm1: qmc: Handle RPACK initialization soc: fsl: cpm1: qmc: Rename qmc_chan_command() soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version soc: fsl: cpm1: qmc: Re-order probe() operations ...

treewide: Fix wrong singular form of jiffies in comments

2024-09-08T18:47:40+00:00

There are several comments all over the place, which uses a wrong singular form of jiffies. Replace 'jiffie' by 'jiffy'. No functional change. Signed-off-by: Anna-Maria Behnsen Signed-off-by: Thomas Gleixner Acked-by: Geert Uytterhoeven # m68k Link: https://lore.kernel.org/all/20240904-devel-anna-maria-b4-timers-flseep-v1-3-e98760256370@linutronix.de

ARM: versatile: fix OF node leak in CPUs prepare

2024-09-02T08:18:43+00:00

Machine code is leaking OF node reference from of_find_matching_node() in realview_smp_prepare_cpus(). Fixes: 5420b4b15617 ("ARM: realview: add an DT SMP boot method") Signed-off-by: Krzysztof Kozlowski Acked-by: Liviu Dudau Link: https://lore.kernel.org/20240826054934.10724-1-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij

arm: vexpress: Remove obsolete RTSM DCSCB support

2024-05-29T22:25:11+00:00

The Arm Versatile DCSCB support is unused as the compatible "arm,rtsm,dcscb" is unused in any .dts file. It was only ever implemented on a s/w model (RTSM). Signed-off-by: Rob Herring (Arm) Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20240510123238.3904779-1-robh@kernel.org Signed-off-by: Sudeep Holla

ARM: Delete ARM11MPCore (ARM11 ARMv6K SMP) support

2023-12-22T11:43:16+00:00

This ARM11 SMP configuration was one of the first SMP configurations the ARM kernel supported, but it has the downside of odd DMA handling, odd cache tagging, and often (as of recent) completely broken cache handling on the ARM RealView PB11MPCore test chips. To boot the platform it was necessary to completely disable the cache. When it comes to the EB 11MPCore it is unclear if this ever worked. These reference designs are now the only ARMv6K SMP platforms. As only reference designs of purely academic interest remain, and since the special-cased DMA and PMU code is hard to maintain and doesn't really work, it is not really worth our time. Delete the ARM11MPCore support along with: - The special DMA quirk CONFIG_DMA_CACHE_RWFO that is only used on ARMv6K SMP, and we are the last ARMV6K system leaving the building and the cache handling is awkward, so good-bye. - The special PMU handling that was only used by ARM11MPCore. The following is left behind: - TIMER_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", ...) in arch/arm/kernel/smp_twd.c, this is still in use by Marvell MMP3 arch/arm/boot/dts/marvell/mmp3.dtsi - IRQCHIP_DECLARE(arm11mp_gic, "arm,arm11mp-gic", ...) in drivers/irqchip/irq-gic.c, this is still in use by Marvell MMP3 arch/arm/boot/dts/marvell/mmp3.dtsi - A compatible for the arm11mpcore SCU, since this was mistakedly used for the Cortex-A9 version of RealView EB. These are unfortunate but will need to be kept around for compatibility. New Marvell-specific compatibles should however probably be added. Acked-by: Mark Rutland Reviewed-by: Arnd Bergmann Signed-off-by: Linus Walleij Acked-by: Liviu Dudau Link: https://lore.kernel.org/r/20231207-drop-11mpcore-v2-1-560b396f3bf5@linaro.org Signed-off-by: Arnd Bergmann

ARM: versatile: Drop unused includes

2023-08-12T08:31:00+00:00

Several includes are not needed, so drop them. Signed-off-by: Rob Herring Acked-by: Linus Walleij Link: https://lore.kernel.org/r/20230803-dt-header-cleanups-for-soc-v2-13-d8de2cc88bff@kernel.org Signed-off-by: Arnd Bergmann

ARM: versatile: mark mmc_status() static

2023-05-26T11:33:05+00:00

mmc_status() is only used in the file it is defined in, and no longer has an 'extern' declaration: arch/arm/mach-versatile/versatile.c:56:14: error: no previous prototype for 'mmc_status' Fixes: 16956fed35fe ("ARM: versatile: switch to DT only booting and remove legacy code") Link: https://lore.kernel.org/r/20230516153109.514251-14-arnd@kernel.org Signed-off-by: Arnd Bergmann

Merge tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2022-10-07T23:36:24+00:00

Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...

Merge tag 'ata-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

2022-10-07T17:48:49+00:00

Pull ata updates from Damien Le Moal: - Print the timeout value for internal command failures due to a timeout (from Tomas) - Improve parameter names in ata_dev_set_feature() to clarify this function use (from Niklas) - Improve the ahci driver low power mode setting initialization to allow more flexibility for the user (from Rafael) - Several patches to remove redundant variables in libata-core, libata-eh and the pata_macio driver and to fix typos in comments (from Jinpeng, Shaomin, Ye) - Some code simplifications and macro renaming (for clarity) in various functions of libata-core (from me) - Add a missing check for a potential failure of sata_scr_read() in sata_print_link_status() (from Li) - Cleanup of libata Kconfig PATA_PLATFORM and PATA_OF_PLATFORM options (from Lukas) - Cleanups of ata dt-bindings and improvements of libahci_platform, ahci and libahci code (from Serge) - New driver for Synopsys AHCI SATA controllers, based of the generic ahci code (from Serge). One compilation warning fix is added for this driver (from me) - Several fixes to macros used to discover a drive capabilities to be consistent with the ACS specifications (from Niklas) - A couple of simplifcations to some libata functions, removing unnecessary arguments (from Niklas) - An improvements to libata-eh code to avoid unnecessary link reset when revalidating a drive after a failed command. In practice, this extra, unneeded reset, reset does not cause any arm beyond slightly slowing down error recovery (from Niklas) * tag 'ata-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (45 commits) ata: libata-eh: avoid needless hard reset when revalidating link ata: libata: drop superfluous ata_eh_analyze_tf() parameter ata: libata: drop superfluous ata_eh_request_sense() parameter ata: fix ata_id_has_dipm() ata: fix ata_id_has_ncq_autosense() ata: fix ata_id_has_devslp() ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting() ata: libata-eh: Remove the unneeded result variable ata: ahci_st: Enable compile test ata: ahci_st: Fix compilation warning MAINTAINERS: Add maintainers for DWC AHCI SATA driver ata: ahci-dwc: Add Baikal-T1 AHCI SATA interface support ata: ahci-dwc: Add platform-specific quirks support dt-bindings: ata: ahci: Add Baikal-T1 AHCI SATA controller DT schema ata: ahci: Add DWC AHCI SATA controller support ata: libahci_platform: Add function returning a clock-handle by id dt-bindings: ata: ahci: Add DWC AHCI SATA controller DT schema ata: ahci: Introduce firmware-specific caps initialization ata: ahci: Convert __ahci_port_base to accepting hpriv as arguments ata: libahci: Don't read AHCI version twice in the save-config method ...

ata: clean up how architectures enable PATA_PLATFORM and PATA_OF_PLATFORM

2022-09-16T14:24:06+00:00

There are two options for platform device PATA support: PATA_PLATFORM: Generic platform device PATA support PATA_OF_PLATFORM: OpenFirmware platform device PATA support If an architecture allows the generic platform device PATA support, it shall select HAVE_PATA_PLATFORM. Then, Generic platform device PATA support is available and can be selected. If an architecture has OpenFirmware support, which it indicates by selecting OF, OpenFirmware platform device PATA support is available and can be selected. If OpenFirmware platform device PATA support is selected, then the functionality (code files) from Generic platform device PATA support needs to be integrated in the kernel build for the OpenFirmware platform device PATA support to work. Select PATA_PLATFORM in PATA_OF_PLATFORM to make sure the needed files are added in the build. So, architectures with OpenFirmware support, do not need to additionally select HAVE_PATA_PLATFORM. It is only needed by architecture that want the non-OF pata-platform module. Reflect this way of intended use of config symbols in the ata Kconfig and adjust all architecture definitions. This follows the suggestion from Arnd Bergmann (see Link). Suggested-by: Arnd Bergmann Link: https://lore.kernel.org/all/4b33bffc-2b6d-46b4-9f1d-d18e55975a5a@www.fastmail.com/ Signed-off-by: Lukas Bulwahn Reviewed-by: Arnd Bergmann Signed-off-by: Damien Le Moal