Linux kernel stable tree (mirror) https://git.radix-linux.su/kernel/linux.git/atom?h=linux-5.11.y 2021-01-08T22:13:54+00:00 2021-01-08T22:13:54+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-01-08T22:13:54+00:00 urn:sha1:95f05058b2bbe3b85c8617b961879e52f692caa5 Pull ARM SoC fixes from Arnd Bergmann: "These are a small number of bug fixes that all came in before or during the merge window, most for the omap platform: - One boot regression fix for Nokia N9 (OMAP3). - Two small defconfig changes for omap2, to reflect changes in drivers - Warning fixes for DT issues on omap2, picoxcell and bitmap SoCs. The picoxcell platform will be removed in v5.12, but fixing it first makes it easier to backport to the fix to stable kernels and get a clean build with new dtc versions" * tag 'arm-fixes-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: picoxcell: fix missing interrupt-parent properties ARM: dts: ux500/golden: Set display max brightness arm64: dts: bitmain: Use generic "ngpios" rather than "snps,nr-gpios" ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875 ARM: omap2plus_defconfig: enable SPI GPIO ARM: OMAP2+: omap_device: fix idling of devices during probe ARM: dts: OMAP3: disable AES on N950/N9 ARM: omap2plus_defconfig: drop unused POWER_AVS option 2020-12-22T20:51:30+00:00 Arnd Bergmann arnd@arndb.de 2020-12-22T16:40:29+00:00 urn:sha1:d734220d5d9038652930de4c6a1dd8394ce7f5a1 Late defconfig changes for omaps for v5.11 merge window Drop drop unused POWER_AVS option, and enable CONFIG_SPI_GPIO as a loadable module so gta04 needs it for controlling the td028ttec1 panel. * tag 'omap-for-v5.11/defconfig-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: enable SPI GPIO ARM: omap2plus_defconfig: drop unused POWER_AVS option ARM: omap2plus_defconfig: Enable TI eQEP counter driver ARM: omap2plus_defconfig: add CONFIG_AK8975=m and CONFIG_KXCJK1013=m ARM: omap2plus_defconfig: Enable OMAP3_THERMAL Link: https://lore.kernel.org/r/pull-1607675790-251347@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de> 2020-12-17T00:25:03+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-12-17T00:25:03+00:00 urn:sha1:b0a6cd29e00a317d7fd823e0db57abbbd9bbb610 Pull ARM SoC defconfig updates from Arnd Bergmann: "These are the usual defconfig updates, adding support for additional modules and updating some files according to changes in Kconfig. I also include the removal of CONFIG_BACKLIGHT_GENERIC across multiple architectures, after the driver was removed" * tag 'arm-soc-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits) powerpc/configs: drop unused BACKLIGHT_GENERIC option parisc: configs: drop unused BACKLIGHT_GENERIC option arm64: defconfig: drop unused BACKLIGHT_GENERIC option ARM: configs: drop unused BACKLIGHT_GENERIC option arm64: defconfig: Enable more Librem 5 hardware arm64: defconfig: Enable RTC_DRV_HYM8563 arm64: defconfig: Enable USB_SERIAL_CP210X arm64: defconfig: Enable PHY_ROCKCHIP_INNO_DSIDPHY arm64: defconfig: Enable ROCKCHIP_LVDS arm64: defconfig: Enable ARM SCMI protocol and drivers ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers ARM: multi_v7_defconfig: enable STM32 dfsdm audio support ARM: multi_v7_defconfig: enable STM32 spdifrx support ARM: multi_v7_defconfig: enable STUSB160X Type-C port controller support ARM: multi_v7_defconfig: add STM32 crypto support ARM: multi_v7_defconfig: enable counter subsystem and stm32 counter drivers ARM: multi_v7_defconfig: make Samsung Exynos EHCI driver a module arm64: defconfig: Enable Qualcomm PON driver ARM: omap2plus_defconfig: Enable TI eQEP counter driver ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot ... 2020-12-16T08:07:17+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-12-16T08:07:17+00:00 urn:sha1:7a932e5702886e872a545d64605c06a51ee17973 Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform 2020-12-15T21:54:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-12-15T21:54:56+00:00 urn:sha1:0cee54c890a40051928991072e5d1cd279611dfd Pull USB / Thunderbolt updates from Greg KH: "Here is the big USB and thunderbolt pull request for 5.11-rc1. Nothing major in here, just the grind of constant development to support new hardware and fix old issues: - thunderbolt updates for new USB4 hardware - cdns3 major driver updates - lots of typec updates and additions as more hardware is available - usb serial driver updates and fixes - other tiny USB driver updates All have been in linux-next with no reported issues" * tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: phy: convert comma to semicolon usb: ucsi: convert comma to semicolon usb: typec: tcpm: convert comma to semicolon usb: typec: tcpm: Update vbus_vsafe0v on init usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled usb: typec: Add class for plug alt mode device USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP USB: typec: tcpm: Fix PR_SWAP error handling USB: typec: tcpm: Hard Reset after not receiving a Request USB: gadget: f_fs: remove likely/unlikely usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus USB: gadget: f_midi: setup SuperSpeed Plus descriptors USB: gadget: f_acm: add support for SuperSpeed Plus USB: gadget: f_rndis: fix bitrate for SuperSpeed and above usb: typec: intel_pmc_mux: Configure cable generation value for USB4 MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data() usb: chipidea: usbmisc_imx: Use of_device_get_match_data() usb: cdns3: fix NULL pointer dereference on no platform data ... 2020-12-12T06:29:38+00:00 Jakub Kicinski kuba@kernel.org 2020-12-12T04:12:36+00:00 urn:sha1:46d5e62dd3c34770f3bfd0642daa9a7772a00362 xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2020-12-11T15:16:52+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2020-12-11T15:16:52+00:00 urn:sha1:007e3370806da1bbe83d0b43a04f420ae2e19dbb Johan writes: USB-serial updates for 5.11-rc1 Here are the USB-serial updates for 5.11-rc1, including: - keyspan_pda write-implementation fixes - digi_acceleport write-wakeup fix - mos7720 parport-restore fix - mos7720 parport-tasklet removal - cp210x termios-handling cleanups - option device-flag fix - ftdi_sio GPIO CBUS-configuration improvements - removal of in_interrupt() uses Included are also various clean ups. All have been in linux-next with no reported issues. * tag 'usb-serial-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (30 commits) USB: serial: ftdi_sio: log the CBUS GPIO validity USB: serial: ftdi_sio: drop GPIO line checking dead code USB: serial: ftdi_sio: report the valid GPIO lines to gpiolib USB: serial: option: add interface-number sanity check to flag handling USB: serial: cp210x: clean up dtr_rts() USB: serial: cp210x: refactor flow-control handling USB: serial: cp210x: drop flow-control debugging USB: serial: cp210x: set terminal settings on open USB: serial: cp210x: clean up line-control handling USB: serial: cp210x: return early on unchanged termios USB: serial: mos7720: defer state restore to a workqueue USB: serial: mos7720: fix parallel-port state restore USB: serial: remove write wait queue USB: serial: digi_acceleport: fix write-wakeup deadlocks USB: serial: keyspan_pda: drop redundant usb-serial pointer USB: serial: keyspan_pda: use BIT() macro USB: serial: keyspan_pda: clean up comments and whitespace USB: serial: keyspan_pda: clean up xircom/entrega support USB: serial: keyspan_pda: add write-fifo support USB: serial: keyspan_pda: increase transmitter threshold ... 2020-12-08T16:30:24+00:00 Andrey Zhizhikin andrey.zhizhikin@leica-geosystems.com 2020-12-01T22:29:18+00:00 urn:sha1:0437141b4e2233ae0109a9584e7a003cd05b0a20 Commit 7ecdea4a0226 ("backlight: generic_bl: Remove this driver as it is unused") removed geenric_bl driver from the tree, together with corresponding config option. Remove BACKLIGHT_GENERIC config item from all ARM configurations. Fixes: 7ecdea4a0226 ("backlight: generic_bl: Remove this driver as it is unused") Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/20201201222922.3183-2-andrey.zhizhikin@leica-geosystems.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de> 2020-12-08T16:20:05+00:00 Arnd Bergmann arnd@arndb.de 2020-12-08T16:20:05+00:00 urn:sha1:1fe9c2531974cf7d5d8097773c53c4bd28703aed Samsung defconfig changes for v5.11 1. Enable sound driver for Midas (Exynos4412 based) boards. 2. Enable ax88796c Ethernet driver for Artik5 (Exynos3250) board. 3. Enable Atmel touchscreen and STMPE ADC drivers for P4 Note board. 4. Build Samsung Exynos EHCI as module, to match the setting for the PHY driver. * tag 'samsung-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: multi_v7_defconfig: make Samsung Exynos EHCI driver a module ARM: exynos_defconfig: compile Atmel MXT touchscreeen as module ARM: defconfig: add STMPE ADC driver for P4 Note ARM: defconfig: Enable ax88796c driver for Exynos boards ARM: multi_v7_defconfig: enable sound driver for Midas platform ARM: exynos_defconfig: enable sound driver for Midas platform Link: https://lore.kernel.org/r/20201201204404.22675-1-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> 2020-12-08T16:16:00+00:00 Arnd Bergmann arnd@arndb.de 2020-12-08T16:15:50+00:00 urn:sha1:6f7cdd2fbfffbeb9de3d2bd1855c2ef72f0e7ef0 This pull request contains ARM multi_v7_defconfig changes for 5.11, please pull the following: - Florian enables the ARM SCMI protocol, and the common clock, HWMON and CPU frequency scaling drivers since those are used by ARCH_BRCMSTB platforms * tag 'arm-soc/for-5.11/defconfig' of https://github.com/Broadcom/stblinux: ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers Link: https://lore.kernel.org/r/20201128163410.1691529-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>