kernel/linux.git/arch/arm/boot, branch v5.10.257

arm: dts: lpc32xx: add clocks property to Motor Control PWM device tree node

2026-03-04T12:19:28+00:00

[ Upstream commit 71630e581a0e34c03757f5c1706f57c853b92555 ] Motor Control PWM depends on its own supply clock, the clock gate control is present in TIMCLK_CTRL1 register. Fixes: b7d41c937ed7 ("ARM: LPC32xx: Add the motor PWM to base dts file") Signed-off-by: Vladimir Zapolskiy Signed-off-by: Sasha Levin

ARM: dts: lpc32xx: Set motor PWM #pwm-cells property value to 3 cells

2026-03-04T12:19:28+00:00

[ Upstream commit 65ae9ea77e1f2a20ad2866f99596df7ccdbd3b95 ] Since commit 4cd2f417a0ac ("dt-bindings: pwm: Convert lpc32xx-pwm.txt to yaml format") both types of PWM controlles on NXP LPC32xx SoC fairly gained 3 cells, reflect it in the platform dtsi file. The change removes a dt binding checker warning: mpwm@400e8000: #pwm-cells:0:0: 3 was expected Cc: Uwe Kleine-König Acked-by: Uwe Kleine-König Reviewed-by: Frank Li Signed-off-by: Vladimir Zapolskiy Stable-dep-of: 71630e581a0e ("arm: dts: lpc32xx: add clocks property to Motor Control PWM device tree node") Signed-off-by: Sasha Levin

ARM: dts: allwinner: sun5i-a13-utoo-p66: delete "power-gpios" property

2026-03-04T12:19:27+00:00

[ Upstream commit 0b2761eb1287bd9f62367cccf6626eb3107cef6f ] The P66's device tree includes the reference design dtsi files, which defines a node and properties for the touchpanel in the common design. The P66 dts file then overrides all the properties to match its own design, but as the touchpanel model is different, a different schema is matched. This other schema uses a different name for the GPIO. The original submission added the correct GPIO property, but did not delete the one inherited from the reference design, causing validation errors. Explicitly delete the incorrect GPIO property. Fixes: 2a53aff27236 ("ARM: dts: sun5i: Enable touchscreen on Utoo P66") Reviewed-by: Jernej Skrabec Link: https://patch.msgid.link/20251225103616.3203473-4-wens@kernel.org Signed-off-by: Chen-Yu Tsai Signed-off-by: Sasha Levin

ARM: dts: imx6q-ba16: fix RTC interrupt level

2026-01-19T12:12:10+00:00

[ Upstream commit e6a4eedd49ce27c16a80506c66a04707e0ee0116 ] RTC interrupt level should be set to "LOW". This was revealed by the introduction of commit: f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode") which changed the way IRQ type is obtained. Fixes: 56c27310c1b4 ("ARM: dts: imx: Add Advantech BA-16 Qseven module") Signed-off-by: Ian Ray Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

ARM: dts: imx6ul-kontron-bl-common: Fix RTS polarity for RS485 interface

2025-08-28T14:22:31+00:00

[ Upstream commit 47ef5256124fb939d8157b13ca048c902435cf23 ] The polarity of the DE signal of the transceiver is active-high for sending. Therefore rs485-rts-active-low is wrong and needs to be removed to make RS485 transmissions work. Signed-off-by: Annette Kobou Signed-off-by: Frieder Schrempf Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards") Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

ARM: dts: vfxxx: Correctly use two tuples for timer address

2025-08-28T14:22:31+00:00

[ Upstream commit f3440dcf8b994197c968fbafe047ce27eed226e8 ] Address and size-cells are 1 and the ftm timer node takes two address spaces in "reg" property, so this should be in two <> tuples. Change has no functional impact, but original code is confusing/less readable. Fixes: 07513e1330a9 ("ARM: dts: vf610: Add Freescale FlexTimer Module timer node.") Signed-off-by: Krzysztof Kozlowski Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

ARM: dts: am335x-bone-common: Increase MDIO reset deassert delay to 50ms

2025-06-27T10:04:22+00:00

commit 929d8490f8790164f5f63671c1c58d6c50411cb2 upstream. Commit b9bf5612610aa7e3 ("ARM: dts: am335x-bone-common: Increase MDIO reset deassert time") already increased the MDIO reset deassert delay from 6.5 to 13 ms, but this may still cause Ethernet PHY probe failures: SMSC LAN8710/LAN8720 4a101000.mdio:00: probe with driver SMSC LAN8710/LAN8720 failed with error -5 On BeagleBone Black Rev. C3, ETH_RESETn is controlled by an open-drain AND gate. It is pulled high by a 10K resistor, and has a 4.7µF capacitor to ground, giving an RC time constant of 47ms. As it takes 0.7RC to charge the capacitor above the threshold voltage of a CMOS input (VDD/2), the delay should be at least 33ms. Considering the typical tolerance of 20% on capacitors, 40ms would be safer. Add an additional safety margin and settle for 50ms. Signed-off-by: Geert Uytterhoeven Reviewed-by: Roger Quadros Link: https://lore.kernel.org/r/9002a58daa1b2983f39815b748ee9d2f8dcc4829.1730366936.git.geert+renesas@glider.be Signed-off-by: Kevin Hilman Signed-off-by: Nobuhiro Iwamatsu (CIP) Signed-off-by: Greg Kroah-Hartman

ARM: dts: am335x-bone-common: Increase MDIO reset deassert time

2025-06-27T10:04:22+00:00

commit b9bf5612610aa7e38d58fee16f489814db251c01 upstream. Prior to commit df16c1c51d81 ("net: phy: mdio_device: Reset device only when necessary") MDIO reset deasserts were performed twice during boot. Now that the second deassert is no longer performed, device probe failures happen due to the change in timing with the following error message: SMSC LAN8710/LAN8720: probe of 4a101000.mdio:00 failed with error -5 Restore the original effective timing, which resolves the probe failures. Signed-off-by: Colin Foster Link: https://lore.kernel.org/r/20240531183817.2698445-1-colin.foster@in-advantage.com Signed-off-by: Kevin Hilman Signed-off-by: Nobuhiro Iwamatsu (CIP) Signed-off-by: Greg Kroah-Hartman

ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board

2025-06-27T10:04:22+00:00

commit 623cef652768860bd5f205fb7b741be278585fba upstream. This patch adds ethernet PHY reset GPIO config for Beaglebone Black series boards with revision C3. This fixes a random phy startup failure bug discussed at [1]. The GPIO pin used for reset is not used on older revisions, so it is ok to apply to all board revisions. The reset timing was discussed and tested at [2]. [1] https://forum.digikey.com/t/ethernet-device-is-not-detecting-on-ubuntu-20-04-lts-on-bbg/19948 [2] https://forum.beagleboard.org/t/recognizing-a-beaglebone-black-rev-c3-board/31249/ Signed-off-by: Robert Nelson Signed-off-by: Shengyu Qu Message-ID: Signed-off-by: Tony Lindgren Signed-off-by: Nobuhiro Iwamatsu (CIP) Signed-off-by: Greg Kroah-Hartman

ARM: dts: qcom: apq8064 merge hw splinlock into corresponding syscon device

2025-06-27T10:04:05+00:00

[ Upstream commit 325c6a441ae1f8fcb1db9bb945b8bdbd3142141e ] Follow up the expected way of describing the SFPB hwspinlock and merge hwspinlock node into corresponding syscon node, fixing several dt-schema warnings. Fixes: 24a9baf933dc ("ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes") Signed-off-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-7-bcedd1406790@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin