kernel/linux.git/arch/arm/boot/dts, branch v6.19.11

arm: dts: lpc32xx: add clocks property to Motor Control PWM device tree node

2026-02-26T23:00:52+00:00

[ Upstream commit 71630e581a0e34c03757f5c1706f57c853b92555 ] Motor Control PWM depends on its own supply clock, the clock gate control is present in TIMCLK_CTRL1 register. Fixes: b7d41c937ed7 ("ARM: LPC32xx: Add the motor PWM to base dts file") Signed-off-by: Vladimir Zapolskiy Signed-off-by: Sasha Levin

ARM: dts: allwinner: sun5i-a13-utoo-p66: delete "power-gpios" property

2026-02-26T23:00:52+00:00

[ Upstream commit 0b2761eb1287bd9f62367cccf6626eb3107cef6f ] The P66's device tree includes the reference design dtsi files, which defines a node and properties for the touchpanel in the common design. The P66 dts file then overrides all the properties to match its own design, but as the touchpanel model is different, a different schema is matched. This other schema uses a different name for the GPIO. The original submission added the correct GPIO property, but did not delete the one inherited from the reference design, causing validation errors. Explicitly delete the incorrect GPIO property. Fixes: 2a53aff27236 ("ARM: dts: sun5i: Enable touchscreen on Utoo P66") Reviewed-by: Jernej Skrabec Link: https://patch.msgid.link/20251225103616.3203473-4-wens@kernel.org Signed-off-by: Chen-Yu Tsai Signed-off-by: Sasha Levin

Merge tag 'at91-fixes-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes

2026-01-15T16:45:07+00:00

Microchip AT91 fixes for v6.19 This update includes: - fix access to the PHYs on the Microchip LAN966X PCB8290 board - fix the ranges DT property for flexcom9 on the Microchip SAMA7D65 SoC - fix the #size-cells DT property for i2c3 on the Microchip SAMA7D65 SoC * tag 'at91-fixes-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: microchip: sama7d65: fix size-cells property for i2c3 ARM: dts: microchip: sama7d65: fix the ranges property for flx9 ARM: dts: microchip: lan966x: Fix the access to the PHYs for pcb8290 Signed-off-by: Arnd Bergmann

ARM: dts: microchip: sama7d65: fix size-cells property for i2c3

2026-01-08T07:31:55+00:00

Fix the #size-cells property for i2c3 node and remove the dtbs_check error telling that "#size-cells: 0 was expected" from schema atmel,at91sam-i2c.yaml and i2c-controller.yaml. Fixes: b51e4aea3ecf ("ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC") Cc: stable@vger.kernel.org # 6.16+ Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20260102170135.70717-3-nicolas.ferre@microchip.com Signed-off-by: Claudiu Beznea

ARM: dts: microchip: sama7d65: fix the ranges property for flx9

2026-01-08T07:31:55+00:00

Update the ranges property for the flexcom9 as per the datasheet and align with the reg property. Fixes: b51e4aea3ecf ("ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC") Cc: stable@vger.kernel.org # 6.16+ Signed-off-by: Hari Prasath Gujulan Elango Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20260102170135.70717-2-nicolas.ferre@microchip.com Signed-off-by: Claudiu Beznea

Merge tag 'imx-fixes-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

2026-01-07T16:49:00+00:00

i.MX fixes for 6.19: - A mba8mx fix from Alexander Stein to correct Ethernet PHY IRQ trigger type - An i.MX95 fix from Carlos Song to correct I3C2 pclk - A couple of imx8qm-mek changes from Haibo Chen to fix light sensor interrupt type and usdhc2 regulator configuration - An imx6q-ba16 change from Ian Ray to fix RTC interrupt level - An imx8mp-dhcom-som change from Marek Vasut to fix sporadic Ethernet link bouncing caused by interruptions on the PHY reference clock - A couple of imx8mp-tx8p changes from Maud Spierings to fix compatible and eqos nvmem-cells - An ARM i.MX fix from Rob Herring to correct mc13xxx LED node names - An imx8qm-ss-dma change from Sherry Sun to correct DMA channels for LPUART - A couple of imx95-toradex-smarc changes from Vitor Soares to fix ethphy1 interrupt and SMARC_SDIO_WP label position * tag 'imx-fixes-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: mba8mx: Fix Ethernet PHY IRQ support arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells arm64: dts: freescale: moduline-display: fix compatible dt-bindings: arm: fsl: moduline-display: fix compatible ARM: dts: imx6q-ba16: fix RTC interrupt level arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt arm64: dts: add off-on-delay-us for usdhc2 regulator arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level ARM: dts: nxp: imx: Fix mc13xxx LED node names arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP Signed-off-by: Arnd Bergmann

ARM: dts: microchip: lan966x: Fix the access to the PHYs for pcb8290

2025-12-30T15:11:17+00:00

The problem is that the MDIO controller can't detect any of the PHYs. The reason is that the lan966x is not pulling high the GPIO 53 that is connected to the PHYs reset GPIO. Without doing this the PHYs are kept in reset. The mdio controller framework has the possibility to control a GPIO to release the reset of the PHYs. So take advantage of this and set line to be high before accessing the PHYs. Signed-off-by: Horatiu Vultur Reviewed-by: Claudiu Beznea Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20251119134750.394655-1-horatiu.vultur@microchip.com [claudiu.beznea: add microchip in patch title, s/possiblity/possibility in patch description] Signed-off-by: Claudiu Beznea

ARM: dts: imx6q-ba16: fix RTC interrupt level

2025-12-30T02:19:16+00:00

RTC interrupt level should be set to "LOW". This was revealed by the introduction of commit: f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode") which changed the way IRQ type is obtained. Fixes: 56c27310c1b4 ("ARM: dts: imx: Add Advantech BA-16 Qseven module") Signed-off-by: Ian Ray Signed-off-by: Shawn Guo

ARM: dts: nxp: imx: Fix mc13xxx LED node names

2025-12-29T08:51:03+00:00

Node names are supposed to be generic and use hexadecimal unit-addresses. Signed-off-by: Rob Herring (Arm) Reviewed-by: Krzysztof Kozlowski Signed-off-by: Shawn Guo

ARM: dts: ixp4xx: Fix up Actiontec MI424WR DTS files

2025-12-15T20:15:36+00:00

The KS8995 switch was unconditionally wired to EthC (eth1) on both MI424WR variants, this is wrong: the D revision has the switch connected to EthB (eth0) so pull this assingment out of the generic MI424WR DTSI file and make it a property of the respective variants instead. Signed-off-by: Linus Walleij Link: https://patch.msgid.link/20251211-ixp4xx-actiontec-dts-fix-v1-1-97af8e79d474@kernel.org Signed-off-by: Krzysztof Kozlowski