kernel/linux.git/arch/arm/boot/dts, branch linux-4.16.y

ARM: dts: imx51-zii-rdu1: fix touchscreen bindings

2018-06-20T19:01:40+00:00

[ Upstream commit 6d3299aef7df7225ecff653feedafb5d1646998b ] This fixes errors in RDU1 device tree that cause touch screens not working. Fixes: ceef0396f367 ("ARM: dts: imx: add ZII RDU1 board") Signed-off-by: Nikita Yushchenko Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ARM: dts: cygnus: fix irq type for arm global timer

2018-06-20T19:01:38+00:00

[ Upstream commit 675c7215aacf54242b2e8bc64bab698abbe764db ] As per ARM documentation PPI(0) ID27 - global timer interrupt is rising-edge sensitive. set IRQ triggering type to IRQ_TYPE_EDGE_RISING for ARM Global timers. Fixes: c9ad7bc5fe3 ("ARM: dts: Enable Broadcom Cygnus SoC") Signed-off-by: Clément Péron Signed-off-by: Florian Fainelli Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ARM: dts: correct missing "compatible" entry for ti81xx SoCs

2018-06-20T19:01:34+00:00

[ Upstream commit 647efef69de483f1dd7944ede31b4cae16acb124 ] The missing "compatible" entries are needed by drivers/clk/ti/clkctrl.c, and without them the structures initialized in drivers/clk/ti/clk-814x.c are not passed to configuration code. The result is a "not found from clkctrl data" error message, although boot proceeds anyway. The reason why the compatible is not found is because the board specific files override the SoC compatible without including it. This did not cause any issues until with the clkctrl nodes got introduced. Very lightly tested on a (lurching) AM3874 design that's in the middle of a kernel upgrade from TI's abandoned 2.6.37 tree. Also tested on j5eco-evm and hp-t410 to verify the clkctrl clocks are found. Fixes: bb30465b5902 ("ARM: dts: dm814x: add clkctrl nodes") Fixes: 80a06c0d8357 ("ARM: dts: dm816x: add clkctrl nodes") Signed-off-by: Graeme Smecher [tony: updated to fix for 8168-evm, updated comments] Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ARM: dts: logicpd-som-lv: Fix Audio Mute

2018-06-20T19:01:32+00:00

[ Upstream commit 95e59fc3c3fa3187a07a75f40b21637deb4bd12d ] The Audio has worked, but the mute pin has a weak pulldown which alows some of the audio signal to pass very quietly. This patch fixes that so the mute pin is actively driven high for mute or low for normal operation. Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ARM: dts: logicpd-som-lv: Fix WL127x Startup Issues

2018-06-20T19:01:32+00:00

[ Upstream commit 189822cbcbf3ea37c26a15612d8f922c440bc0e0 ] The VAUX3 rail from the PMIC powers a clock driver which clocks the WL127x. This corrects a bug which did not correctly associate the vin-supply with the proper power rail. This also fixes a typo in the pinmuxing to properly configure the interrupt pin. Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ARM: dts: da850: fix W=1 warnings with pinmux node

2018-06-20T19:01:23+00:00

[ Upstream commit 94a82284ad4711b7f9fd78981fdc7a1cb645030b ] Remove unused #address-cells and #size-cells from pinmux node. This fixes W=1 warnings of the type: arch/arm/boot/dts/da850-lcdk.dtb: Warning (avoid_unnecessary_addr_size): /soc@1c00000/pinmux@14120: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Tested on DA850 LCDK by checking output of: /sys/kernel/debug/pinctrl/1c14120.pinmux-pinctrl-single/pins before and after the change. Reviewed-by: David Lechner Signed-off-by: Sekhar Nori Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ARM: dts: Fix cm2 and prm sizes for omap4

2018-06-20T19:01:17+00:00

[ Upstream commit bc8a3ef1940c9a6dfa316b31e063fdd4fbab0add ] The size of these modules is 0x2000, not 0x3000. The extra 0x1000 after 0x2000 is for the interconnect target agent which is a separate device. Fixes: 7415b0b4c645 ("ARM: dts: omap4: add minimal l4 bus layout with control module support") Cc: Tero Kristo Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ARM: dts: porter: Fix HDMI output routing

2018-05-30T06:17:45+00:00

[ Upstream commit d4b78db6ac3e084e2bdc57d5518bd247c727f396 ] The HDMI encoder is connected to the RGB output of the DU, which is port@0, not port@1. Fix the incorrect DT description. Fixes: c5af8a4248d3 ("ARM: dts: porter: add DU DT support") Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ARM: dts: imx7d: cl-som-imx7: fix pinctrl_enet

2018-05-30T06:17:45+00:00

[ Upstream commit 2bada7ac1fdcbf79a9689bd2ff65fa515ca7a31f ] The missing last digit of the CONFIG values is added. Looks like a typo of some sort when comparing to the downstream dt. This fixes intermittent behavior behaviour of the ethernet controllers. Signed-off-by: Aapo Vienamo Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ARM: dts: at91: tse850: use the correct compatible for the eeprom

2018-05-30T06:17:44+00:00

[ Upstream commit 7981190fb5dd710dea08c2613cee3d05e795ca5e ] The used part does contain an eeprom compatible with an Atmel 24c02 chip and it is from NXP, but it is not called 24c02. It's actually a se97b chip. Adjust the compatible accordingly. Fixes: 21dd0ece34c2 ("ARM: dts: at91: add devicetree for the Axentia TSE-850") Signed-off-by: Peter Rosin Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman