kernel/linux.git/arch/arc/include/asm/Kbuild, branch linux-4.20.y

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-06-05T03:27:54+00:00

Pull timers and timekeeping updates from Thomas Gleixner: - Core infrastucture work for Y2038 to address the COMPAT interfaces: + Add a new Y2038 safe __kernel_timespec and use it in the core code + Introduce config switches which allow to control the various compat mechanisms + Use the new config switch in the posix timer code to control the 32bit compat syscall implementation. - Prevent bogus selection of CPU local clocksources which causes an endless reselection loop - Remove the extra kthread in the clocksource code which has no value and just adds another level of indirection - The usual bunch of trivial updates, cleanups and fixlets all over the place - More SPDX conversions * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) clocksource/drivers/mxs_timer: Switch to SPDX identifier clocksource/drivers/timer-imx-tpm: Switch to SPDX identifier clocksource/drivers/timer-imx-gpt: Switch to SPDX identifier clocksource/drivers/timer-imx-gpt: Remove outdated file path clocksource/drivers/arc_timer: Add comments about locking while read GFRC clocksource/drivers/mips-gic-timer: Add pr_fmt and reword pr_* messages clocksource/drivers/sprd: Fix Kconfig dependency clocksource: Move inline keyword to the beginning of function declarations timer_list: Remove unused function pointer typedef timers: Adjust a kernel-doc comment tick: Prefer a lower rating device only if it's CPU local device clocksource: Remove kthread time: Change nanosleep to safe __kernel_* types time: Change types to new y2038 safe __kernel_* types time: Fix get_timespec64() for y2038 safe compat interfaces time: Add new y2038 safe __kernel_timespec posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME time: Introduce CONFIG_COMPAT_32BIT_TIME time: Introduce CONFIG_64BIT_TIME in architectures compat: Enable compat_get/put_timespec64 always ...

arc: use generic dma_noncoherent_ops

2018-05-19T06:46:12+00:00

Switch to the generic noncoherent direct mapping implementation. Signed-off-by: Christoph Hellwig Tested-by: Alexey Brodkin Acked-by: Vineet Gupta

time: Add an asm-generic/compat.h file

2018-04-19T11:28:51+00:00

We have a couple of files that try to include asm/compat.h on architectures where this is available. Those should generally use the higher-level linux/compat.h file, but that in turn fails to include asm/compat.h when CONFIG_COMPAT is disabled, unless we can provide that header on all architectures. This adds the asm/compat.h for all remaining architectures to simplify the dependencies. Architectures that are getting removed in linux-4.17 are not changed here, to avoid needless conflicts with the removal patches. Those architectures are broken by this patch, but we have already shown that they have no users. Signed-off-by: Arnd Bergmann

arch: Remove clkdev.h asm-generic from Kbuild

2018-01-03T17:02:11+00:00

Now that every architecture is using the generic clkdev.h file and we no longer include asm/clkdev.h anywhere in the tree, we can remove it. Cc: Russell King Acked-by: Arnd Bergmann Cc: Acked-by: Geert Uytterhoeven [m68k] Signed-off-by: Stephen Boyd

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

arc: move generic-y of exported headers to uapi/asm/Kbuild

2017-07-09T18:43:21+00:00

Since commit fcc8487d477a ("uapi: export all headers under uapi directories"), all (and only) headers under uapi directories are exported, but asm-generic wrappers are still exceptions. To complete de-coupling the uapi from kernel headers, move generic-y of exported headers to uapi/asm/Kbuild. With this change, "make headers_install" will just need to parse uapi/asm/Kbuild to build up exported headers. Signed-off-by: Masahiro Yamada

signal: Remove non-uapi

2017-06-04T13:11:47+00:00

By moving the kernel side __SI_* defintions right next to the userspace ones we can kill the non-uapi versions of include include/asm-generic/siginfo.h and untangle the unholy mess of includes. [ tglx: Removed uapi/asm/siginfo.h from m32r, microblaze, mn10300 and score ] Signed-off-by: Christoph Hellwig Signed-off-by: Thomas Gleixner Cc: linux-arch@vger.kernel.org Cc: Fenghua Yu Cc: Tony Luck Cc: linux-ia64@vger.kernel.org Cc: Arnd Bergmann Cc: sparclinux@vger.kernel.org Cc: "David S. Miller" Link: http://lkml.kernel.org/r/20170603190102.28866-6-hch@lst.de

add asm-generic/extable.h

2017-03-28T00:27:28+00:00

... and make the users of generic uaccess.h use that. Signed-off-by: Al Viro

sched/cputime: Remove generic asm headers

2017-02-01T08:14:07+00:00

cputime_t is now only used by two architectures: * powerpc (when CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y) * s390 And since the core doesn't use it anymore, we don't need any arch support from the others. So we can remove their stub implementations. A final cleanup would be to provide an efficient pure arch implementation of cputime_to_nsec() for s390 and powerpc and finally remove include/linux/cputime.h . Signed-off-by: Frederic Weisbecker Cc: Benjamin Herrenschmidt Cc: Fenghua Yu Cc: Heiko Carstens Cc: Linus Torvalds Cc: Martin Schwidefsky Cc: Michael Ellerman Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Rik van Riel Cc: Stanislaw Gruszka Cc: Thomas Gleixner Cc: Tony Luck Cc: Wanpeng Li Link: http://lkml.kernel.org/r/1485832191-26889-36-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar

PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for ARC

2016-09-06T15:53:32+00:00

Add ARC as an arch that supports PCI_MSI_IRQ_DOMAIN and add generation of msi.h in the ARC arch. Signed-off-by: Joao Pinto Signed-off-by: Bjorn Helgaas Acked-by: Vineet Gupta