kernel/linux.git/arch/arc/boot, branch v6.6.131

ARC: [plat-hsdk]: Remove misplaced interrupt-cells property

2024-05-02T14:32:33+00:00

[ Upstream commit 61231eb8113ce47991f35024f9c20810b37996bf ] "gmac" node stands for just an ordinary Ethernet controller, which is by no means a provider of interrupts, i.e. it doesn't serve as an interrupt controller, thus "#interrupt-cells" property doesn't belong to it and so we remove it. Fixes: ------------>8------------ DTC arch/arc/boot/dts/hsdk.dtb arch/arc/boot/dts/hsdk.dts:207.23-235.5: Warning (interrupt_provider): /soc/ethernet@8000: '#interrupt-cells' found, but node is not an interrupt provider arch/arc/boot/dts/hsdk.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' ------------>8------------ Reported-by: Vineet Gupta Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin

arc: dts: Harmonize EHCI/OHCI DT nodes name

2022-10-17T23:32:12+00:00

In accordance with the Generic EHCI/OHCI bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible nodes are correctly named. Signed-off-by: Serge Semin Acked-by: Alexey Brodkin Acked-by: Krzysztof Kozlowski Signed-off-by: Vineet Gupta

ARC: dts: align SPI NOR node name with dtschema

2022-04-18T19:22:31+00:00

The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by: Krzysztof Kozlowski Signed-off-by: Vineet Gupta

kbuild: do not quote string values in include/config/auto.conf

2022-01-08T09:03:57+00:00

The previous commit fixed up all shell scripts to not include include/config/auto.conf. Now that include/config/auto.conf is only included by Makefiles, we can change it into a more Make-friendly form. Previously, Kconfig output string values enclosed with double-quotes (both in the .config and include/config/auto.conf): CONFIG_X="foo bar" Unlike shell, Make handles double-quotes (and single-quotes as well) verbatim. We must rip them off when used. There are some patterns: [1] $(patsubst "%",%,$(CONFIG_X)) [2] $(CONFIG_X:"%"=%) [3] $(subst ",,$(CONFIG_X)) [4] $(shell echo $(CONFIG_X)) These are not only ugly, but also fragile. [1] and [2] do not work if the value contains spaces, like CONFIG_X=" foo bar " [3] does not work correctly if the value contains double-quotes like CONFIG_X="foo\"bar" [4] seems to work better, but has a cost of forking a process. Anyway, quoted strings were always PITA for our Makefiles. This commit changes Kconfig to stop quoting in include/config/auto.conf. These are the string type symbols referenced in Makefiles or scripts: ACPI_CUSTOM_DSDT_FILE ARC_BUILTIN_DTB_NAME ARC_TUNE_MCPU BUILTIN_DTB_SOURCE CC_IMPLICIT_FALLTHROUGH CC_VERSION_TEXT CFG80211_EXTRA_REGDB_KEYDIR EXTRA_FIRMWARE EXTRA_FIRMWARE_DIR EXTRA_TARGETS H8300_BUILTIN_DTB INITRAMFS_SOURCE LOCALVERSION MODULE_SIG_HASH MODULE_SIG_KEY NDS32_BUILTIN_DTB NIOS2_DTB_SOURCE OPENRISC_BUILTIN_DTB SOC_CANAAN_K210_DTB_SOURCE SYSTEM_BLACKLIST_HASH_LIST SYSTEM_REVOCATION_KEYS SYSTEM_TRUSTED_KEYS TARGET_CPU UNUSED_KSYMS_WHITELIST XILINX_MICROBLAZE0_FAMILY XILINX_MICROBLAZE0_HW_VER XTENSA_VARIANT_NAME I checked them one by one, and fixed up the code where necessary. Signed-off-by: Masahiro Yamada

ARC: haps: bump memory to 1 GB

2021-03-12T15:22:23+00:00

Signed-off-by: Vineet Gupta

ARC: build: use $(READELF) instead of hard-coded readelf

2020-12-02T01:24:05+00:00

The top Makefile defines READELF as the readelf in the cross-toolchains. Use it rather than the host readelf. Signed-off-by: Masahiro Yamada Signed-off-by: Vineet Gupta

ARC: build: remove unneeded extra-y

2020-12-02T01:24:05+00:00

Adding vmlinux.* to extra-y has no point because we expect they are built on demand while building uImage.* Add them to 'targets' is enough to include the corresponding .cmd file. Signed-off-by: Masahiro Yamada Signed-off-by: Vineet Gupta

ARC: build: move symlink creation to arch/arc/Makefile to avoid race

2020-12-02T01:24:05+00:00

If you run 'make uImage uImage.gz' with the parallel option, uImage.gz will be created by two threads simultaneously. This is because arch/arc/Makefile does not specify the dependency between uImage and uImage.gz. Hence, GNU Make assumes they can be built in parallel. One thread descends into arch/arc/boot/ to create uImage, and another to create uImage.gz. Please notice the same log is displayed twice in the following steps: $ export CROSS_COMPILE= $ make -s ARCH=arc defconfig $ make -j$(nproc) ARCH=arc uImage uImage.gz [ snip ] LD vmlinux SORTTAB vmlinux SYSMAP System.map OBJCOPY arch/arc/boot/vmlinux.bin OBJCOPY arch/arc/boot/vmlinux.bin GZIP arch/arc/boot/vmlinux.bin.gz GZIP arch/arc/boot/vmlinux.bin.gz UIMAGE arch/arc/boot/uImage.gz UIMAGE arch/arc/boot/uImage.gz Image Name: Linux-5.10.0-rc4-00003-g62f23044 Created: Sun Nov 22 02:52:26 2020 Image Type: ARC Linux Kernel Image (gzip compressed) Data Size: 2109376 Bytes = 2059.94 KiB = 2.01 MiB Load Address: 80000000 Entry Point: 80004000 Image arch/arc/boot/uImage is ready Image Name: Linux-5.10.0-rc4-00003-g62f23044 Created: Sun Nov 22 02:52:26 2020 Image Type: ARC Linux Kernel Image (gzip compressed) Data Size: 2815455 Bytes = 2749.47 KiB = 2.69 MiB Load Address: 80000000 Entry Point: 80004000 This is a race between the two threads trying to write to the same file arch/arc/boot/uImage.gz. This is a potential problem that can generate a broken file. I fixed a similar problem for ARM by commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not generate invalid images"). I highly recommend to avoid such build rules that cause a race condition. Move the uImage rule to arch/arc/Makefile. Another strangeness is that arch/arc/boot/Makefile compares the timestamps between $(obj)/uImage and $(obj)/uImage.*: $(obj)/uImage: $(obj)/uImage.$(suffix-y) @ln -sf $(notdir $<) $@ @echo ' Image $@ is ready' This does not work as expected since $(obj)/uImage is a symlink. The symlink should be created in a phony target rule. I used $(kecho) instead of echo to suppress the message 'Image arch/arc/boot/uImage is ready' when the -s option is given. Signed-off-by: Masahiro Yamada Signed-off-by: Vineet Gupta

ARC: [dts] fix the errors detected by dtbs_check

2020-10-06T04:02:29+00:00

xxx/arc/boot/dts/axs101.dt.yaml: dw-apb-ictl@e0012000: $nodename:0: \ 'dw-apb-ictl@e0012000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' From schema: xxx/interrupt-controller/snps,dw-apb-ictl.yaml The node name of the interrupt controller must start with "interrupt-controller" instead of "dw-apb-ictl". Signed-off-by: Zhen Lei Signed-off-by: Vineet Gupta

ARC: [plat-eznps]: Drop support for EZChip NPS platform

2020-10-06T04:02:29+00:00

NPS customers are no longer doing active development, as evident from rand config build failures reported in recent times, so drop support for NPS platform. Tested-by: kernel test robot Signed-off-by: Vineet Gupta