kernel/linux.git/arch/arc/boot, branch v6.19.11

ARC: migrate to the generic rule for built-in DTB

2025-01-17T23:52:09+00:00

Commit 654102df2ac2 ("kbuild: add generic support for built-in boot DTBs") introduced generic support for built-in DTBs. Select GENERIC_BUILTIN_DTB to use the generic rule. To keep consistency across architectures, this commit also renames CONFIG_ARC_BUILTIN_DTB_NAME to CONFIG_BUILTIN_DTB_NAME. Now, "nsim_700" is the default value for CONFIG_BUILTIN_DTB_NAME, rather than a fallback in case it is empty. Acked-by: Vineet Gupta Signed-off-by: Masahiro Yamada

ARC: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices

2024-12-10T18:12:56+00:00

snps,dw-apb-gpio-port is deprecated since commit ef42a8da3cf3 ("dt-bindings: gpio: dwapb: Add ngpios property support"). The respective driver supports this since commit 7569486d79ae ("gpio: dwapb: Add ngpios DT-property support") which is included in Linux v5.10-rc1. This change was created using git grep -l snps,nr-gpios arch/arc/boot/dts | xargs perl -p -i -e 's/\bsnps,nr-gpios\b/ngpios/ . Signed-off-by: Uwe Kleine-König Signed-off-by: Vineet Gupta

Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2024-05-18T19:39:20+00:00

Pull Kbuild updates from Masahiro Yamada: - Avoid 'constexpr', which is a keyword in C23 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of 'dt_binding_check' - Fix weak references to avoid GOT entries in position-independent code generation - Convert the last use of 'optional' property in arch/sh/Kconfig - Remove support for the 'optional' property in Kconfig - Remove support for Clang's ThinLTO caching, which does not work with the .incbin directive - Change the semantics of $(src) so it always points to the source directory, which fixes Makefile inconsistencies between upstream and downstream - Fix 'make tar-pkg' for RISC-V to produce a consistent package - Provide reasonable default coverage for objtool, sanitizers, and profilers - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc. - Remove the last use of tristate choice in drivers/rapidio/Kconfig - Various cleanups and fixes in Kconfig * tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits) kconfig: use sym_get_choice_menu() in sym_check_prop() rapidio: remove choice for enumeration kconfig: lxdialog: remove initialization with A_NORMAL kconfig: m/nconf: merge two item_add_str() calls kconfig: m/nconf: remove dead code to display value of bool choice kconfig: m/nconf: remove dead code to display children of choice members kconfig: gconf: show checkbox for choice correctly kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal Makefile: remove redundant tool coverage variables kbuild: provide reasonable defaults for tool coverage modules: Drop the .export_symbol section from the final modules kconfig: use menu_list_for_each_sym() in sym_check_choice_deps() kconfig: use sym_get_choice_menu() in conf_write_defconfig() kconfig: add sym_get_choice_menu() helper kconfig: turn defaults and additional prompt for choice members into error kconfig: turn missing prompt for choice members into error kconfig: turn conf_choice() into void function kconfig: use linked list in sym_set_changed() kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED kconfig: gconf: remove debug code ...

kbuild: use $(src) instead of $(srctree)/$(src) for source directory

2024-05-09T19:34:52+00:00

Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined in scripts/Makefile.build: src := $(obj) When the kernel is built in a separate output directory, $(src) does not accurately reflect the source directory location. While Kbuild resolves this discrepancy by specifying VPATH=$(srctree) to search for source files, it does not cover all cases. For example, when adding a header search path for local headers, -I$(srctree)/$(src) is typically passed to the compiler. This introduces inconsistency between upstream and downstream Makefiles because $(src) is used instead of $(srctree)/$(src) for the latter. To address this inconsistency, this commit changes the semantics of $(src) so that it always points to the directory in the source tree. Going forward, the variables used in Makefiles will have the following meanings: $(obj) - directory in the object tree $(src) - directory in the source tree (changed by this commit) $(objtree) - the top of the kernel object tree $(srctree) - the top of the kernel source tree Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced with $(src). Signed-off-by: Masahiro Yamada Reviewed-by: Nicolas Schier

ARC: [plat-hsdk]: Remove misplaced interrupt-cells property

2024-04-16T17:45:57+00:00

"gmac" node stands for just an ordinary Ethernet controller, which is by no means a provider of interrupts, i.e. it doesn't serve as an interrupt controller, thus "#interrupt-cells" property doesn't belong to it and so we remove it. Fixes: ------------>8------------ DTC arch/arc/boot/dts/hsdk.dtb arch/arc/boot/dts/hsdk.dts:207.23-235.5: Warning (interrupt_provider): /soc/ethernet@8000: '#interrupt-cells' found, but node is not an interrupt provider arch/arc/boot/dts/hsdk.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' ------------>8------------ Reported-by: Vineet Gupta Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta

ARC: Fix typos

2024-04-02T01:40:39+00:00

Fix typos, most reported by "codespell arch/arc". Only touches comments, no code changes. Signed-off-by: Bjorn Helgaas Signed-off-by: Vineet Gupta

arc: dts: Harmonize EHCI/OHCI DT nodes name

2022-10-17T23:32:12+00:00

In accordance with the Generic EHCI/OHCI bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible nodes are correctly named. Signed-off-by: Serge Semin Acked-by: Alexey Brodkin Acked-by: Krzysztof Kozlowski Signed-off-by: Vineet Gupta

ARC: dts: align SPI NOR node name with dtschema

2022-04-18T19:22:31+00:00

The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by: Krzysztof Kozlowski Signed-off-by: Vineet Gupta

kbuild: do not quote string values in include/config/auto.conf

2022-01-08T09:03:57+00:00

The previous commit fixed up all shell scripts to not include include/config/auto.conf. Now that include/config/auto.conf is only included by Makefiles, we can change it into a more Make-friendly form. Previously, Kconfig output string values enclosed with double-quotes (both in the .config and include/config/auto.conf): CONFIG_X="foo bar" Unlike shell, Make handles double-quotes (and single-quotes as well) verbatim. We must rip them off when used. There are some patterns: [1] $(patsubst "%",%,$(CONFIG_X)) [2] $(CONFIG_X:"%"=%) [3] $(subst ",,$(CONFIG_X)) [4] $(shell echo $(CONFIG_X)) These are not only ugly, but also fragile. [1] and [2] do not work if the value contains spaces, like CONFIG_X=" foo bar " [3] does not work correctly if the value contains double-quotes like CONFIG_X="foo\"bar" [4] seems to work better, but has a cost of forking a process. Anyway, quoted strings were always PITA for our Makefiles. This commit changes Kconfig to stop quoting in include/config/auto.conf. These are the string type symbols referenced in Makefiles or scripts: ACPI_CUSTOM_DSDT_FILE ARC_BUILTIN_DTB_NAME ARC_TUNE_MCPU BUILTIN_DTB_SOURCE CC_IMPLICIT_FALLTHROUGH CC_VERSION_TEXT CFG80211_EXTRA_REGDB_KEYDIR EXTRA_FIRMWARE EXTRA_FIRMWARE_DIR EXTRA_TARGETS H8300_BUILTIN_DTB INITRAMFS_SOURCE LOCALVERSION MODULE_SIG_HASH MODULE_SIG_KEY NDS32_BUILTIN_DTB NIOS2_DTB_SOURCE OPENRISC_BUILTIN_DTB SOC_CANAAN_K210_DTB_SOURCE SYSTEM_BLACKLIST_HASH_LIST SYSTEM_REVOCATION_KEYS SYSTEM_TRUSTED_KEYS TARGET_CPU UNUSED_KSYMS_WHITELIST XILINX_MICROBLAZE0_FAMILY XILINX_MICROBLAZE0_HW_VER XTENSA_VARIANT_NAME I checked them one by one, and fixed up the code where necessary. Signed-off-by: Masahiro Yamada

ARC: haps: bump memory to 1 GB

2021-03-12T15:22:23+00:00

Signed-off-by: Vineet Gupta