kernel/linux.git/arch/arc/Kconfig, branch v5.0.3

ARC: enable uboot support unconditionally

2019-02-21T19:03:19+00:00

After reworking U-boot args handling code and adding paranoid arguments check we can eliminate CONFIG_ARC_UBOOT_SUPPORT and enable uboot support unconditionally. For JTAG case we can assume that core registers will come up reset value of 0 or in worst case we rely on user passing '-on=clear_regs' to Metaware debugger. Cc: stable@vger.kernel.org Tested-by: Corentin LABBE Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta

ARCv2: support manual regfile save on interrupts

2019-02-21T19:03:18+00:00

There's a hardware bug which affects the HSDK platform, triggered by micro-ops for auto-saving regfile on taken interrupt. The workaround is to inhibit autosave. Signed-off-by: Vineet Gupta

Merge tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2018-12-29T21:40:29+00:00

Pull Kconfig file consolidation from Masahiro Yamada: "Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by Christoph Hellwig. Currently, every architecture that wants to provide common peripheral busses needs to add some boilerplate code and include the right Kconfig files. This series instead just selects the presence (when needed) and then handles everything in the bus-specific Kconfig file under drivers/" * tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: pcmcia: remove per-arch PCMCIA config entry eisa: consolidate EISA Kconfig entry in drivers/eisa rapidio: consolidate RAPIDIO config entry in drivers/rapidio pcmcia: allow PCMCIA support independent of the architecture PCI: consolidate the PCI_SYSCALL symbol PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config options PCI: consolidate PCI config entry in drivers/pci MIPS: remove the HT_PCI config option

Merge tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping

2018-12-28T22:12:21+00:00

Pull DMA mapping updates from Christoph Hellwig: "A huge update this time, but a lot of that is just consolidating or removing code: - provide a common DMA_MAPPING_ERROR definition and avoid indirect calls for dma_map_* error checking - use direct calls for the DMA direct mapping case, avoiding huge retpoline overhead for high performance workloads - merge the swiotlb dma_map_ops into dma-direct - provide a generic remapping DMA consistent allocator for architectures that have devices that perform DMA that is not cache coherent. Based on the existing arm64 implementation and also used for csky now. - improve the dma-debug infrastructure, including dynamic allocation of entries (Robin Murphy) - default to providing chaining scatterlist everywhere, with opt-outs for the few architectures (alpha, parisc, most arm32 variants) that can't cope with it - misc sparc32 dma-related cleanups - remove the dma_mark_clean arch hook used by swiotlb on ia64 and replace it with the generic noncoherent infrastructure - fix the return type of dma_set_max_seg_size (Niklas Söderlund) - move the dummy dma ops for not DMA capable devices from arm64 to common code (Robin Murphy) - ensure dma_alloc_coherent returns zeroed memory to avoid kernel data leaks through userspace. We already did this for most common architectures, but this ensures we do it everywhere. dma_zalloc_coherent has been deprecated and can hopefully be removed after -rc1 with a coccinelle script" * tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping: (73 commits) dma-mapping: fix inverted logic in dma_supported dma-mapping: deprecate dma_zalloc_coherent dma-mapping: zero memory returned from dma_alloc_* sparc/iommu: fix ->map_sg return value sparc/io-unit: fix ->map_sg return value arm64: default to the direct mapping in get_arch_dma_ops PCI: Remove unused attr variable in pci_dma_configure ia64: only select ARCH_HAS_DMA_COHERENT_TO_PFN if swiotlb is enabled dma-mapping: bypass indirect calls for dma-direct vmd: use the proper dma_* APIs instead of direct methods calls dma-direct: merge swiotlb_dma_ops into the dma_direct code dma-direct: use dma_direct_map_page to implement dma_direct_map_sg dma-direct: improve addressability error reporting swiotlb: remove dma_mark_clean swiotlb: remove SWIOTLB_MAP_ERROR ACPI / scan: Refactor _CCA enforcement dma-mapping: factor out dummy DMA ops dma-mapping: always build the direct mapping code dma-mapping: move dma_cache_sync out of line dma-mapping: move various slow path functions out of line ...

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-12-25T23:44:08+00:00

Pull timer updates from Thomas Gleixner: "The timer department delivers the following christmas presents: Core code: - Use proper seqcount initializer to make lockdep happy - SPDX annotations and cleanup of license boilerplates - Use DEFINE_SHOW_ATTRIBUTE() instead of open coding it - Minor cleanups Driver code: - Add the sched_clock for the arc timer (Alexey Brodkin) - Change the file timer names for riscv, rockchip, tegra20, sun4i and meson6 (Daniel Lezcano) - Add the DT bindings for r8a7796, r8a77470 and r8a774a1 (Biju Das) - Remove the early platform driver registration for timer-ti-dm (Bartosz Golaszewski) - Provide the sched_clock for the riscv timer (Anup Patel) - Add support for ARM64 for the imx-gpt and convert the imx-tpm to the timer-of API (Anson Huang) - Remove useless irq protection for the imx-gpt (Clément Péron) - Remove a duplicate function name for the vt8500 (Dan Carpenter) - Remove obsolete inclusion of for the tegra20 (Geert Uytterhoeven) - Demote the prcmu and the custom sched_clock for the dbx500 and the ux500 (Linus Walleij) - Add a new timer clock for the RDA8810PL (Manivannan Sadhasivam) - Rename the macro to stick to the register name and add the delay timer (Martin Blumenstingl) - Switch the bcm2835 to the SPDX identifier (Stefan Wahren) - Fix the interrupt register access on the fttmr010 (Tao Ren) - Add missing of_node_put in the initialization path on the integrator-ap (Yangtao Li)" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) dt-bindings: timer: Document RDA8810PL SoC timer clocksource/drivers/rda: Add clock driver for RDA8810PL SoC clocksource/drivers/meson6: Change name meson6_timer timer-meson6 clocksource/drivers/sun4i: Change name sun4i_timer to timer-sun4i clocksource/drivers/tegra20: Change name tegra20_timer to timer-tegra20 clocksource/drivers/rockchip: Change name rockchip_timer to timer-rockchip clocksource/drivers/riscv: Change name riscv_timer to timer-riscv clocksource/drivers/riscv_timer: Provide the sched_clock clocksource/drivers/timer-imx-tpm: Specify clock name for timer-of clocksource/drivers/fttmr010: Fix invalid interrupt register access clocksource/drivers/integrator-ap: Add missing of_node_put() clocksource/drivers/bcm2835: Switch to SPDX identifier dt-bindings: timer: renesas, cmt: Document r8a774a1 CMT support clocksource/drivers/timer-imx-tpm: Convert the driver to timer-of clocksource/drivers/arc_timer: Utilize generic sched_clock dt-bindings: timer: renesas, cmt: Document r8a77470 CMT support dt-bindings: timer: renesas, cmt: Document r8a7796 CMT support clocksource/drivers/imx-gpt: Remove unnecessary irq protection clocksource/drivers/imx-gpt: Add support for ARM64 clocksource/drivers/meson6_timer: Implement the ARM delay timer ...

clocksource/drivers/arc_timer: Utilize generic sched_clock

2018-12-18T21:22:23+00:00

It turned out we used to use default implementation of sched_clock() from kernel/sched/clock.c which was as precise as 1/HZ, i.e. by default we had 10 msec granularity of time measurement. Now given ARC built-in timers are clocked with the same frequency as CPU cores we may get much higher precision of time tracking. Thus we switch to generic sched_clock which really reads ARC hardware counters. This is especially helpful for measuring short events. That's what we used to have: ------------------------------>8------------------------ $ perf stat /bin/sh -c /root/lmbench-master/bin/arc/hello > /dev/null Performance counter stats for '/bin/sh -c /root/lmbench-master/bin/arc/hello': 10.000000 task-clock (msec) # 2.832 CPUs utilized 1 context-switches # 0.100 K/sec 1 cpu-migrations # 0.100 K/sec 63 page-faults # 0.006 M/sec 3049480 cycles # 0.305 GHz 1091259 instructions # 0.36 insn per cycle 256828 branches # 25.683 M/sec 27026 branch-misses # 10.52% of all branches 0.003530687 seconds time elapsed 0.000000000 seconds user 0.010000000 seconds sys ------------------------------>8------------------------ And now we'll see: ------------------------------>8------------------------ $ perf stat /bin/sh -c /root/lmbench-master/bin/arc/hello > /dev/null Performance counter stats for '/bin/sh -c /root/lmbench-master/bin/arc/hello': 3.004322 task-clock (msec) # 0.865 CPUs utilized 1 context-switches # 0.333 K/sec 1 cpu-migrations # 0.333 K/sec 63 page-faults # 0.021 M/sec 2986734 cycles # 0.994 GHz 1087466 instructions # 0.36 insn per cycle 255209 branches # 84.947 M/sec 26002 branch-misses # 10.19% of all branches 0.003474829 seconds time elapsed 0.003519000 seconds user 0.000000000 seconds sys ------------------------------>8------------------------ Note how much more meaningful is the second output - time spent for execution pretty much matches number of cycles spent (we're runnign @ 1GHz here). Signed-off-by: Alexey Brodkin Cc: Daniel Lezcano Cc: Vineet Gupta Cc: Thomas Gleixner Cc: stable@vger.kernel.org Acked-by: Vineet Gupta Signed-off-by: Daniel Lezcano

dma-mapping: always build the direct mapping code

2018-12-13T20:06:11+00:00

All architectures except for sparc64 use the dma-direct code in some form, and even for sparc64 we had the discussion of a direct mapping mode a while ago. In preparation for directly calling the direct mapping code don't bother having it optionally but always build the code in. This is a minor hardship for some powerpc and arm configs that don't pull it in yet (although they should in a relase ot two), and sparc64 which currently doesn't need it at all, but it will reduce the ifdef mess we'd otherwise need significantly. Signed-off-by: Christoph Hellwig Acked-by: Jesper Dangaard Brouer Tested-by: Jesper Dangaard Brouer Tested-by: Tony Luck

arch: switch the default on ARCH_HAS_SG_CHAIN

2018-12-06T15:04:56+00:00

These days architectures are mostly out of the business of dealing with struct scatterlist at all, unless they have architecture specific iommu drivers. Replace the ARCH_HAS_SG_CHAIN symbol with a ARCH_NO_SG_CHAIN one only enabled for architectures with horrible legacy iommu drivers like alpha and parisc, and conditionally for arm which wants to keep it disable for legacy platforms. Signed-off-by: Christoph Hellwig Reviewed-by: Palmer Dabbelt

ARC: change defconfig defaults to ARCv2

2018-11-30T18:54:01+00:00

Change the default defconfig (used with 'make defconfig') to the ARCv2 nsim_hs_defconfig, and also switch the default Kconfig ISA selection to ARCv2. This allows several default defconfigs (e.g. make defconfig, make allnoconfig, make tinyconfig) to all work with ARCv2 by default. Note since we change default architecture from ARCompact to ARCv2 it's required to explicitly mention architecture type in ARCompact defconfigs otherwise ARCv2 will be implied and binaries will be generated for ARCv2. Cc: # 4.4.x Signed-off-by: Kevin Hilman Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta

PCI: consolidate the PCI_SYSCALL symbol

2018-11-23T02:45:52+00:00

Let architectures select the syscall support instead of duplicating the kconfig entry. Signed-off-by: Christoph Hellwig Signed-off-by: Masahiro Yamada