kernel/linux.git/Documentation/trace, branch v7.0-rc7

Merge tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2026-02-17T17:11:04+00:00

Pull char/misc/IIO driver updates from Greg KH: "Here is the big set of char/misc/iio and other smaller driver subsystem changes for 7.0-rc1. Lots of little things in here, including: - Loads of iio driver changes and updates and additions - gpib driver updates - interconnect driver updates - i3c driver updates - hwtracing (coresight and intel) driver updates - deletion of the obsolete mwave driver - binder driver updates (rust and c versions) - mhi driver updates (causing a merge conflict, see below) - mei driver updates - fsi driver updates - eeprom driver updates - lots of other small char and misc driver updates and cleanups All of these have been in linux-next for a while, with no reported issues" * tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits) mux: mmio: fix regmap leak on probe failure rust_binder: return p from rust_binder_transaction_target_node() drivers: android: binder: Update ARef imports from sync::aref rust_binder: fix needless borrow in context.rs iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin iio: sca3000: Fix a resource leak in sca3000_probe() iio: proximity: rfd77402: Add interrupt handling support iio: proximity: rfd77402: Document device private data structure iio: proximity: rfd77402: Use devm-managed mutex initialization iio: proximity: rfd77402: Use kernel helper for result polling iio: proximity: rfd77402: Align polling timeout with datasheet iio: cros_ec: Allow enabling/disabling calibration mode iio: frequency: ad9523: correct kernel-doc bad line warning iio: buffer: buffer_impl.h: fix kernel-doc warnings iio: gyro: itg3200: Fix unchecked return value in read_raw MAINTAINERS: add entry for ADE9000 driver iio: accel: sca3000: remove unused last_timestamp field iio: accel: adxl372: remove unused int2_bitmask field iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll() iio: magnetometer: Remove IRQF_ONESHOT ...

Merge tag 'trace-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

2026-02-14T03:25:16+00:00

Pull tracing updates from Steven Rostedt: "User visible changes: - Add an entry into MAINTAINERS file for RUST versions of code There's now RUST code for tracing and static branches. To differentiate that code from the C code, add entries in for the RUST version (with "[RUST]" around it) so that the right maintainers get notified on changes. - New bitmask-list option added to tracefs When this is set, bitmasks in trace event are not displayed as hex numbers, but instead as lists: e.g. 0-5,7,9 instead of 0000015f - New show_event_filters file in tracefs Instead of having to search all events/*/*/filter for any active filters enabled in the trace instance, the file show_event_filters will list them so that there's only one file that needs to be examined to see if any filters are active. - New show_event_triggers file in tracefs Instead of having to search all events/*/*/trigger for any active triggers enabled in the trace instance, the file show_event_triggers will list them so that there's only one file that needs to be examined to see if any triggers are active. - Have traceoff_on_warning disable trace pintk buffer too Recently recording of trace_printk() could go to other trace instances instead of the top level instance. But if traceoff_on_warning triggers, it doesn't stop the buffer with trace_printk() and that data can easily be lost by being overwritten. Have traceoff_on_warning also disable the instance that has trace_printk() being written to it. - Update the hist_debug file to show what function the field uses When CONFIG_HIST_TRIGGERS_DEBUG is enabled, a hist_debug file exists for every event. This displays the internal data of any histogram enabled for that event. But it is lacking the function that is called to process one of its fields. This is very useful information that was missing when debugging histograms. - Up the histogram stack size from 16 to 31 Stack traces can be used as keys for event histograms. Currently the size of the stack that is stored is limited to just 16 entries. But the storage space in the histogram is 256 bytes, meaning that it can store up to 31 entries (plus one for the count of entries). Instead of letting that space go to waste, up the limit from 16 to 31. This makes the keys much more useful. - Fix permissions of per CPU file buffer_size_kb The per CPU file of buffer_size_kb was incorrectly set to read only in a previous cleanup. It should be writable. - Reset "last_boot_info" if the persistent buffer is cleared The last_boot_info shows address information of a persistent ring buffer if it contains data from a previous boot. It is cleared when recording starts again, but it is not cleared when the buffer is reset. The data is useless after a reset so clear it on reset too. Internal changes: - A change was made to allow tracepoint callbacks to have preemption enabled, and instead be protected by SRCU. This required some updates to the callbacks for perf and BPF. perf needed to disable preemption directly in its callback because it expects preemption disabled in the later code. BPF needed to disable migration, as its code expects to run completely on the same CPU. - Have irq_work wake up other CPU if current CPU is "isolated" When there's a waiter waiting on ring buffer data and a new event happens, an irq work is triggered to wake up that waiter. This is noisy on isolated CPUs (running NO_HZ_FULL). Trigger an IPI to a house keeping CPU instead. - Use proper free of trigger_data instead of open coding it in. - Remove redundant call of event_trigger_reset_filter() It was called immediately in a function that was called right after it. - Workqueue cleanups - Report errors if tracing_update_buffers() were to fail. - Make the enum update workqueue generic for other parts of tracing On boot up, a work queue is created to convert enum names into their numbers in the trace event format files. This work queue can also be used for other aspects of tracing that takes some time and shouldn't be called by the init call code. The blk_trace initialization takes a bit of time. Have the initialization code moved to the new tracing generic work queue function. - Skip kprobe boot event creation call if there's no kprobes defined on cmdline The kprobe initialization to set up kprobes if they are defined on the cmdline requires taking the event_mutex lock. This can be held by other tracing code doing initialization for a long time. Since kprobes added to the kernel command line need to be setup immediately, as they may be tracing early initialization code, they cannot be postponed in a work queue and must be setup in the initcall code. If there's no kprobe on the kernel cmdline, there's no reason to take the mutex and slow down the boot up code waiting to get the lock only to find out there's nothing to do. Simply exit out early if there's no kprobes on the kernel cmdline. If there are kprobes on the cmdline, then someone cares more about tracing over the speed of boot up. - Clean up the trigger code a bit - Move code out of trace.c and into their own files trace.c is now over 11,000 lines of code and has become more difficult to maintain. Start splitting it up so that related code is in their own files. Move all the trace_printk() related code into trace_printk.c. Move the __always_inline stack functions into trace.h. Move the pid filtering code into a new trace_pid.c file. - Better define the max latency and snapshot code The latency tracers have a "max latency" buffer that is a copy of the main buffer and gets swapped with it when a new high latency is detected. This keeps the trace up to the highest latency around where this max_latency buffer is never written to. It is only used to save the last max latency trace. A while ago a snapshot feature was added to tracefs to allow user space to perform the same logic. It could also enable events to trigger a "snapshot" if one of their fields hit a new high. This was built on top of the latency max_latency buffer logic. Because snapshots came later, they were dependent on the latency tracers to be enabled. In reality, the latency tracers depend on the snapshot code and not the other way around. It was just that they came first. Restructure the code and the kconfigs to have the latency tracers depend on snapshot code instead. This actually simplifies the logic a bit and allows to disable more when the latency tracers are not defined and the snapshot code is. - Fix a "false sharing" in the hwlat tracer code The loop to search for latency in hardware was using a variable that could be changed by user space for each sample. If the user change this variable, it could cause a bus contention, and reading that variable can show up as a large latency in the trace causing a false positive. Read this variable at the start of the sample with a READ_ONCE() into a local variable and keep the code from sharing cache lines with readers. - Fix function graph tracer static branch optimization code When only one tracer is defined for function graph tracing, it uses a static branch to call that tracer directly. When another tracer is added, it goes into loop logic to call all the registered callbacks. The code was incorrect when going back to one tracer and never re-enabled the static branch again to do the optimization code. - And other small fixes and cleanups" * tag 'trace-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (46 commits) function_graph: Restore direct mode when callbacks drop to one tracing: Fix indentation of return statement in print_trace_fmt() tracing: Reset last_boot_info if ring buffer is reset tracing: Fix to set write permission to per-cpu buffer_size_kb tracing: Fix false sharing in hwlat get_sample() tracing: Move d_max_latency out of CONFIG_FSNOTIFY protection tracing: Better separate SNAPSHOT and MAX_TRACE options tracing: Add tracer_uses_snapshot() helper to remove #ifdefs tracing: Rename trace_array field max_buffer to snapshot_buffer tracing: Move pid filtering into trace_pid.c tracing: Move trace_printk functions out of trace.c and into trace_printk.c tracing: Use system_state in trace_printk_init_buffers() tracing: Have trace_printk functions use flags instead of using global_trace tracing: Make tracing_update_buffers() take NULL for global_trace tracing: Make printk_trace global for tracing system tracing: Move ftrace_trace_stack() out of trace.c and into trace.h tracing: Move __trace_buffer_{un}lock_*() functions to trace.h tracing: Make tracing_selftest_running global to the tracing subsystem tracing: Make tracing_disabled global for tracing system tracing: Clean up use of trace_create_maxlat_file() ...

Merge tag 'trace-rv-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

2026-02-12T22:08:49+00:00

Pull runtime verifier updates from Steven Rostedt: - Refactor da_monitor to minimize macros Complete refactor of da_monitor.h to reduce reliance on macros generating functions. Use generic static functions and uses the preprocessor only when strictly necessary (e.g. for tracepoint handlers). The change essentially relies on functions with generic names (e.g. da_handle) instead of monitor-specific as well adding the need to define constant (e.g. MONITOR_NAME, MONITOR_TYPE) before including the header rather than calling macros that would define functions. Also adapt monitors and documentation accordingly. - Cleanup DA code generation scripts Clean up functions in dot2c removing reimplementations of trivial library functions (__buff_to_string) and removing some other unused intermediate steps. - Annotate functions with types in the rvgen python scripts - Remove superfluous assignments and cleanup generated code The rvgen scripts generate a superfluous assignment to 0 for enum variables and don't add commas to the last elements, which is against the kernel coding standards. Change the generation process for a better compliance and slightly simpler logic. - Remove superfluous declarations from generated code The monitor container source files contained a declaration and a definition for the rv_monitor variable. The former is superfluous and was removed. - Fix reference to outdated documentation s/da_monitor_synthesis.rst/monitor_synthesis.rst in comment in da_monitor.h * tag 'trace-rv-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: rv: Fix documentation reference in da_monitor.h verification/rvgen: Remove unused variable declaration from containers verification/dot2c: Remove superfluous enum assignment and add last comma verification/dot2c: Remove __buff_to_string() and cleanup verification/rvgen: Annotate DA functions with types verification/rvgen: Adapt dot2k and templates after refactoring da_monitor.h Documentation/rv: Adapt documentation after da_monitor refactoring rv: Cleanup da_monitor after refactor rv: Refactor da_monitor to minimise macros

Merge tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2026-02-12T01:20:38+00:00

Pull PCI updates from Bjorn Helgaas: "Enumeration: - Don't try to enable Extended Tags on VFs since that bit is Reserved and causes misleading log messages (Håkon Bugge) - Initialize Endpoint Read Completion Boundary to match Root Port, regardless of ACPI _HPX (Håkon Bugge) - Apply _HPX PCIe Setting Record only to AER configuration, and only when OS owns PCIe hotplug but not AER, to avoid clobbering Extended Tag and Relaxed Ordering settings (Håkon Bugge) Resource management: - Move CardBus code to setup-cardbus.c and only build it when CONFIG_CARDBUS is set (Ilpo Järvinen) - Fix bridge window alignment with optional resources, where additional alignment requirement was previously lost (Ilpo Järvinen) - Stop over-estimating bridge window size since they are now assigned without any gaps between them (Ilpo Järvinen) - Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening for nested bridges and endpoints (Ilpo Järvinen) - Add pbus_mem_size_optional() to handle sizes of optional resources (SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen) - Don't claim disabled bridge windows to avoid spurious claim failures (Ilpo Järvinen) Driver binding: - Fix device reference leak in pcie_port_remove_service() (Uwe Kleine-König) - Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific portdrv.c (Uwe Kleine-König) - Convert portdrv to use pcie_port_bus_type.probe() and .remove() callbacks so .probe() and .remove() can eventually be removed from struct device_driver (Uwe Kleine-König) Error handling: - Clear stale errors on reporting agents upon probe so they don't look like recent errors (Lukas Wunner) - Add generic RAS tracepoint for hotplug events (Shuai Xue) - Add RAS tracepoint for link speed changes (Shuai Xue) Power management: - Avoid redundant delay on transition from D3hot to D3cold if the device was already in D3hot (Brian Norris) - Prevent runtime suspend until devices are fully initialized to avoid saving incompletely configured device state (Brian Norris) Power control: - Add power_on/off callbacks with generic signature to pwrseq, tc9563, and slot drivers so they can be used by pwrctrl core (Manivannan Sadhasivam) - Add PCIe M.2 connector support to the slot pwrctrl driver (Manivannan Sadhasivam) - Switch to pwrctrl interfaces to create, destroy, and power on/off devices, calling them from host controller drivers instead of the PCI core (Manivannan Sadhasivam) - Drop qcom .assert_perst() callbacks since this is now done by the controller driver instead of the pwrctrl driver (Manivannan Sadhasivam) Virtualization: - Remove an incorrect unlock in pci_slot_trylock() error handling (Jinhui Guo) - Lock the bridge device for slot reset (Keith Busch) - Enable ACS after IOMMU configuration on OF platforms so ACS is enabled an all devices; previously the first device enumerated (typically a Root Port) didn't have ACS enabled (Manivannan Sadhasivam) - Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to work around hardware erratum; previously ACS SV was only temporarily disabled, which worked for enumeration but not after reset (Manivannan Sadhasivam) Peer-to-peer DMA: - Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang when removing the PCI device (Hou Tao) - Remove incorrect p2pmem_alloc_mmap() warning about page refcount (Hou Tao) Endpoint framework: - Add configfs sub-groups synchronously to avoid NULL pointer dereference when racing with removal (Liu Song) - Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink() functions (Manikanta Maddireddy) ASPEED PCIe controller driver: - Add ASPEED Root Complex DT binding and driver (Jacky Chou) Freescale i.MX6 PCIe controller driver: - Add DT binding and driver support for an optional external refclock in addition to the refclock from the internal PLL (Richard Zhu) - Fix CLKREQ# control so host asserts it during enumeration and Endpoints can use it afterwards to exit the L1.2 link state (Richard Zhu) NVIDIA Tegra PCIe controller driver: - Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear down MSI domains to be built as modules (Aaron Kling) - Allow pci-tegra to be built as a module (Aaron Kling) NVIDIA Tegra194 PCIe controller driver: - Relax Kconfig so tegra194 can be built for platforms beyond Tegra194 (Vidya Sagar) Qualcomm PCIe controller driver: - Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski) - Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3, IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated schema (Krzysztof Kozlowski) - Add DT binding and driver support for SA8255p Endpoint being configured by firmware (Mrinmay Sarkar) - Parse PERST# from all PCIe bridge nodes for future platforms that will have PERST# in Switch Downstream Ports as well as in Root Ports (Manivannan Sadhasivam) Renesas RZ/G3S PCIe controller driver: - Use pci_generic_config_write() since the writability provided by the custom wrapper is unnecessary (Claudiu Beznea) SOPHGO PCIe controller driver: - Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi Amaoto) Synopsys DesignWare PCIe controller driver: - Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a pointer to the preceding Capability, to allow removal of Capabilities that are advertised but not fully implemented (Qiang Yu) - Remove MSI and MSI-X Capabilities in platforms that can't support them, so the PCI core automatically falls back to INTx (Qiang Yu) - Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status for drivers that support this (Shawn Lin) - Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if link is not up to avoid an unnecessary timeout (Manivannan Sadhasivam) - Revert dw-rockchip, qcom, and DWC core changes that used link-up IRQs to trigger enumeration instead of waiting for link to be up because the PCI core doesn't allocate bus number space for hierarchies that might be attached (Niklas Cassel) - Make endpoint iATU entry for MSI permanent instead of programming it dynamically, which is slow and racy with respect to other concurrent traffic, e.g., eDMA (Koichiro Den) - Use iMSI-RX MSI target address when possible to fix endpoints using 32-bit MSI (Shawn Lin) - Allow DWC host controller driver probe to continue if device is not found or found but inactive; only fail when there's an error with the link (Manivannan Sadhasivam) - For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers are not accessible after PME_Turn_Off, simply wait 10ms instead of polling for L2/L3 Ready (Richard Zhu) - Use multiple iATU entries to map large bridge windows and DMA ranges when necessary instead of failing (Samuel Holland) - Add EPC dynamic_inbound_mapping feature bit for Endpoint Controllers that can update BAR inbound address translation without requiring EPF driver to clear/reset the BAR first, and advertise it for DWC-based Endpoints (Koichiro Den) - Add EPC subrange_mapping feature bit for Endpoint Controllers that can map multiple independent inbound regions in a single BAR, implement subrange mapping, advertise it for DWC-based Endpoints, and add Endpoint selftests for it (Koichiro Den) - Make resizable BARs work for Endpoint multi-PF configurations; previously it only worked for PF 0 (Aksh Garg) - Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings, and Address Match Mode (Aksh Garg) - Set up iATU when ECAM is enabled; previously IO and MEM outbound windows weren't programmed, and ECAM-related iATU entries weren't restored after suspend/resume, so config accesses failed (Krishna Chaitanya Chundru) Miscellaneous: - Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU work so WQ_UNBOUND can eventually be removed (Marco Crivellari)" * tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits) PCI/bwctrl: Disable BW controller on Intel P45 using a quirk PCI: Disable ACS SV for IDT 0x8090 switch PCI: Disable ACS SV for IDT 0x80b5 switch PCI: Cache ACS Capabilities register PCI: Enable ACS after configuring IOMMU for OF platforms PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404] PCI: Add ACS quirk for Qualcomm Hamoa & Glymur PCI: Use device_lock_assert() to verify device lock is held PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held PCI: Fix pci_slot_lock () device locking PCI: Fix pci_slot_trylock() error handling PCI: Mark Nvidia GB10 to avoid bus reset PCI: Mark ASM1164 SATA controller to avoid bus reset PCI: host-generic: Avoid reporting incorrect 'missing reg property' error PCI/PME: Replace RMW of Root Status register with direct write PCI/AER: Clear stale errors on reporting agents upon probe PCI: Don't claim disabled bridge windows PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port() PCI: dwc: Fix missing iATU setup when ECAM is enabled PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup() ...

tracing: Add show_event_triggers to expose active event triggers

2026-01-26T22:44:24+00:00

To audit active event triggers, userspace currently must traverse the events/ directory and read each individual trigger file. This is cumbersome for system-wide auditing or debugging. Introduce "show_event_triggers" at the trace root directory. This file displays all events that currently have one or more triggers applied, alongside the trigger configuration, in a consolidated system:event [tab] trigger format. The implementation leverages the existing trace_event_file iterators and uses the trigger's own print() operation to ensure output consistency with the per-event trigger files. Link: https://patch.msgid.link/20260105142939.2655342-3-atomlin@atomlin.com Signed-off-by: Aaron Tomlin Signed-off-by: Steven Rostedt (Google)

tracing: Add show_event_filters to expose active event filters

2026-01-26T22:44:15+00:00

Currently, to audit active Ftrace event filters, userspace must recursively traverse the events/ directory and read each individual filter file. This is inefficient for monitoring tools and debugging. Introduce "show_event_filters" at the trace root directory. This file displays all events that currently have a filter applied, alongside the actual filter string, in a consolidated system:event [tab] filter format. The implementation reuses the existing trace_event_file iterators to ensure atomic traversal of the event list and utilises guard(rcu)() for automatic, scope-based protection when accessing volatile filter strings. Link: https://patch.msgid.link/20260105142939.2655342-2-atomlin@atomlin.com Signed-off-by: Aaron Tomlin Signed-off-by: Steven Rostedt (Google)

tracing: Add bitmask-list option for human-readable bitmask display

2026-01-26T22:00:50+00:00

Add support for displaying bitmasks in human-readable list format (e.g., 0,2-5,7) in addition to the default hexadecimal bitmap representation. This is particularly useful when tracing CPU masks and other large bitmasks where individual bit positions are more meaningful than their hexadecimal encoding. When the "bitmask-list" option is enabled, the printk "%*pbl" format specifier is used to render bitmasks as comma-separated ranges, making trace output easier to interpret for complex CPU configurations and large bitmask values. Link: https://patch.msgid.link/20251226160724.2246493-2-atomlin@atomlin.com Signed-off-by: Aaron Tomlin Signed-off-by: Steven Rostedt (Google)

Documentation: use a source-read extension for the index link boilerplate

2026-01-23T18:59:34+00:00

The root document usually has a special :ref:`genindex` link to the generated index. This is also the case for Documentation/index.rst. The other index.rst files deeper in the directory hierarchy usually don't. For SPHINXDIRS builds, the root document isn't Documentation/index.rst, but some other index.rst in the hierarchy. Currently they have a ".. only::" block to add the index link when doing SPHINXDIRS html builds. This is obviously very tedious and repetitive. The link is also added to all index.rst files in the hierarchy for SPHINXDIRS builds, not just the root document. Put the boilerplate in a sphinx-includes/subproject-index.rst file, and include it at the end of the root document for subproject builds in an ad-hoc source-read extension defined in conf.py. For now, keep having the boilerplate in translations, because this approach currently doesn't cover translated index link headers. Cc: Jonathan Corbet Cc: Mauro Carvalho Chehab Cc: Randy Dunlap Signed-off-by: Jani Nikula Tested-by: Mauro Carvalho Chehab Reviewed-by: Mauro Carvalho Chehab [jc: did s/doctree/kern_doc_dir/ ] Signed-off-by: Jonathan Corbet Message-ID: <20260123143149.2024303-1-jani.nikula@intel.com>

Documentation/trace: Fix links to other documents

2026-01-12T16:31:19+00:00

Link to another document does not require 'file:'. Removing it fixes links in generated html docs. Signed-off-by: Petr Vorel Signed-off-by: Jonathan Corbet Message-ID: <20260111223643.174812-2-pvorel@suse.cz>

Documentation/rv: Adapt documentation after da_monitor refactoring

2026-01-12T06:43:50+00:00

Previous changes refactored the da_monitor header file to avoid using macros. This implies a few changes in how to import and use da_monitor helpers: DECLARE_DA_MON_(name, type) is substituted by #define RV_MON_TYPE RV_MON_ da_handle_event_() is substituted by da_handle_event() Update the documentation to reflect the changes. Reviewed-by: Nam Cao Link: https://lore.kernel.org/r/20251126104241.291258-4-gmonaco@redhat.com Signed-off-by: Gabriele Monaco