kernel/linux.git/Documentation/networking/devlink, branch v6.6.132

devlink: Fix command annotation documentation

2024-02-23T08:24:50+00:00

[ Upstream commit 4ab18af47a2c2a80ac11674122935700caf80cc6 ] Command example string is not read as command. Fix command annotation. Fixes: a8ce7b26a51e ("devlink: Expose port function commands to control migratable") Signed-off-by: Parav Pandit Reviewed-by: Jiri Pirko Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240206161717.466653-1-parav@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

Merge tag 'docs-6.6' of git://git.lwn.net/linux

2023-08-31T03:05:42+00:00

Pull documentation updates from Jonathan Corbet: "Documentation work keeps chugging along; this includes: - Work from Carlos Bilbao to integrate rustdoc output into the generated HTML documentation. This took some work to figure out how to do it without slowing the docs build and without creating people who don't have Rust installed, but Carlos got there - Move the loongarch and mips architecture documentation under Documentation/arch/ - Some more maintainer documentation from Jakub ... plus the usual assortment of updates, translations, and fixes" * tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits) Docu: genericirq.rst: fix irq-example input: docs: pxrc: remove reference to phoenix-sim Documentation: serial-console: Fix literal block marker docs/mm: remove references to hmm_mirror ops and clean typos docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add() Documentation: Fix typos Documentation/ABI: Fix typos scripts: kernel-doc: fix macro handling in enums scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN] Documentation: riscv: Update boot image header since EFI stub is supported Documentation: riscv: Add early boot document Documentation: arm: Add bootargs to the table of added DT parameters docs: kernel-parameters: Refer to the correct bitmap function doc: update params of memhp_default_state= docs: Add book to process/kernel-docs.rst docs: sparse: fix invalid link addresses docs: vfs: clean up after the iterate() removal docs: Add a section on surveys to the researcher guidelines docs: move mips under arch docs: move loongarch under arch ...

devlink: Expose port function commands to control IPsec packet offloads

2023-08-28T00:08:45+00:00

Expose port function commands to enable / disable IPsec packet offloads, this is used to control the port IPsec capabilities. When IPsec packet is disabled for a function of the port (default), function cannot offload IPsec packet operations (encapsulation and XFRM policy offload). When enabled, IPsec packet operations can be offloaded by the function of the port, which includes crypto operation (Encrypt/Decrypt), IPsec encapsulation and XFRM state and policy offload. Example of a PCI VF port which supports IPsec packet offloads: $ devlink port show pci/0000:06:00.0/1 pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0 function: hw_addr 00:00:00:00:00:00 roce enable ipsec_packet disable $ devlink port function set pci/0000:06:00.0/1 ipsec_packet enable $ devlink port show pci/0000:06:00.0/1 pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0 function: hw_addr 00:00:00:00:00:00 roce enable ipsec_packet enable Signed-off-by: Dima Chumak Signed-off-by: Leon Romanovsky Signed-off-by: Saeed Mahameed Reviewed-by: Jiri Pirko Link: https://lore.kernel.org/r/20230825062836.103744-3-saeed@kernel.org Signed-off-by: Jakub Kicinski

devlink: Expose port function commands to control IPsec crypto offloads

2023-08-28T00:08:44+00:00

Expose port function commands to enable / disable IPsec crypto offloads, this is used to control the port IPsec capabilities. When IPsec crypto is disabled for a function of the port (default), function cannot offload any IPsec crypto operations (Encrypt/Decrypt and XFRM state offloading). When enabled, IPsec crypto operations can be offloaded by the function of the port. Example of a PCI VF port which supports IPsec crypto offloads: $ devlink port show pci/0000:06:00.0/1 pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0 function: hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto disable $ devlink port function set pci/0000:06:00.0/1 ipsec_crypto enable $ devlink port show pci/0000:06:00.0/1 pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0 function: hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto enable Signed-off-by: Dima Chumak Signed-off-by: Leon Romanovsky Signed-off-by: Saeed Mahameed Reviewed-by: Jiri Pirko Link: https://lore.kernel.org/r/20230825062836.103744-2-saeed@kernel.org Signed-off-by: Jakub Kicinski

Documentation: Fix typos

2023-08-18T17:29:03+00:00

Fix typos in Documentation. Signed-off-by: Bjorn Helgaas Link: https://lore.kernel.org/r/20230814212822.193684-4-helgaas@kernel.org Signed-off-by: Jonathan Corbet

net/mlx5e: Add recovery flow for tx devlink health reporter for unhealthy PTP SQ

2023-08-14T21:40:20+00:00

A new check for the tx devlink health reporter is introduced for determining when the PTP port timestamping SQ is considered unhealthy. If there are enough CQEs considered never to be delivered, the space that can be utilized on the SQ decreases significantly, impacting performance and usability of the SQ. The health reporter is triggered when the number of likely never delivered port timestamping CQEs that utilize the space of the PTP SQ is greater than 93.75% of the total capacity of the SQ. A devlink health reporter recover method is also provided for this specific TX error context that restarts the PTP SQ. Signed-off-by: Rahul Rameshbabu Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed

net/mlx5: Consolidate devlink documentation in devlink/mlx5.rst

2023-08-14T21:40:20+00:00

De-duplicate documentation by removing mellanox/mlx5/devlink.rst. Instead, only use the generic devlink documentation directory to document mlx5 devlink parameters. Avoid providing general devlink tool usage information in mlx5-specific documentation. Signed-off-by: Rahul Rameshbabu Reviewed-by: Jiri Pirko Reviewed-by: Gal Pressman Signed-off-by: Saeed Mahameed

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-04-20T23:29:51+00:00

Adjacent changes: net/mptcp/protocol.h 63740448a32e ("mptcp: fix accept vs worker race") 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close") ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time") Signed-off-by: Jakub Kicinski

ice: document RDMA devlink parameters

2023-04-18T01:53:13+00:00

Commit e523af4ee560 ("net/ice: Add support for enable_iwarp and enable_roce devlink param") added support for the enable_roce and enable_iwarp parameters in the ice driver. It didn't document these parameters in the ice devlink documentation file. Add this documentation, including a note about the mutual exclusion between the two modes. Signed-off-by: Jacob Keller Reviewed-by: Leon Romanovsky Acked-by: Tony Nguyen Link: https://lore.kernel.org/r/20230414162614.571861-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski

net/mlx5e: Add devlink hairpin queues parameters

2023-03-16T05:12:08+00:00

We refer to a TC NIC rule that involves forwarding as "hairpin". Hairpin queues are mlx5 hardware specific implementation for hardware forwarding of such packets. Per the discussion in [1], move the hairpin queues control (number and size) from debugfs to devlink. Expose two devlink params: - hairpin_num_queues: control the number of hairpin queues - hairpin_queue_size: control the size (in packets) of the hairpin queues [1] https://lore.kernel.org/all/20230111194608.7f15b9a1@kernel.org/ Signed-off-by: Gal Pressman Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed Link: https://lore.kernel.org/r/20230314054234.267365-12-saeed@kernel.org Signed-off-by: Jakub Kicinski