kernel/linux.git/Documentation/devicetree/bindings/regulator, branch v7.0.10

regulator: dt-bindings: fp9931: Make vin-supply property as required

2026-05-23T11:08:46+00:00

[ Upstream commit d342f5e355aaa4ff4fb5bd4a4aab70ed3a4f3c35 ] The FP9931 requires a vin power supply to operate, so mark vin-supply as a required property in the binding. Fixes: 80bbdefdfb417 ("dt-bindings: regulator: Add Fitipower FP9931/JD9930") Signed-off-by: Robby Cai Link: https://patch.msgid.link/20260313133102.2749890-2-robby.cai@nxp.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

regulator: dt-bindings: fix typos in regulator-uv-* descriptions

2026-03-17T15:47:48+00:00

Remove word "over". Signed-off-by: Hugo Villeneuve Link: https://patch.msgid.link/20260317152357.3473584-1-hugo@hugovil.com Signed-off-by: Mark Brown

regulator: dt-bindings: mt6359: make regulator names unique

2026-02-22T23:51:39+00:00

Update the example devicetree with unique regulator names for all regulators. This reflects the same change made to the actual .dtsi file. Signed-off-by: David Lechner Acked-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20260219-mtk-mt6359-fix-regulator-names-v1-2-ee0fcebfe1d9@baylibre.com Signed-off-by: Mark Brown

Merge tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2026-02-11T18:53:39+00:00

Pull gpio updates from Bartosz Golaszewski: "There are two new drivers and some changes to GPIO core but mostly just GPIO driver updates across a wide array of files, adding support for new models as well as various refactoring changes. Nothing controversial and everything has spent a good measure of time in linux-next. GPIOLIB core: - shrink the GPIO bus driver stub code - rework software node support for "undefined" software nodes - provide and use devm_fwnode_gpiod_get_optional() - only compile the OF quirk for MT2701 when needed New drivers: - add the GPIO driver for ROHM bd72720 - add the gpio-line-mux driver providing 1-to-many mapping for a single real GPIO Driver changes: - refactor gpio-pca9570: use lock guard, add missing headers, use devres consistently - add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio driver along with some prerequisite refactoring - use device_get_match_data() where applicable and save some lines - add support for more models to gpio-cadence - add the compatible property to reset-gpio and use it in shared GPIO management - drop unnecessary use of irqd_get_trigger_type() in gpio-max77759 - add support for a new variant to gpio-pca953x - extend build coverage with COMPILE_TEST for more drivers - constify configfs structures in gpio-sim and gpio-virtuser - add support for the K3 SoC to gpio-spacemit - implement the missing .get_direction() callback in gpio-max77620 - add support for Tegra264 to gpio-tegra186 - drop unneeded MODULE_ALIAS() from gpio-menz127 DT bindings: - document support for the opencores GPIO controller in gpio-mmio - document new variants for gpio-pca953x Documentation: - extensively describe interrupt source detection for gpio-pca953x and add more models to the list of supported variants" * tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits) gpio: tegra186: Add support for Tegra264 dt-bindings: gpio: Add Tegra264 support gpio: spacemit-k1: Use PDR for pin direction, not SDR/CDR gpio: max77620: Implement .get_direction() callback gpio: aspeed-sgpio: Support G7 Aspeed sgpiom controller dt-bindings: gpio: aspeed,sgpio: Support ast2700 gpio: aspeed-sgpio: Convert IRQ functions to use llops callbacks gpio: aspeed-sgpio: Create llops to handle hardware access gpio: aspeed-sgpio: Remove unused bank name field gpio: aspeed-sgpio: Change the macro to support deferred probe regulator: bd71815: switch to devm_fwnode_gpiod_get_optional gpiolib: introduce devm_fwnode_gpiod_get_optional() wrapper gpio: mmio: Add compatible for opencores GPIO dt-bindings: gpio-mmio: Correct opencores GPIO gpio: pca9570: use lock guards gpio: pca9570: Don't use "proxy" headers gpio: pca9570: Use devm_mutex_init() for mutex initialization MAINTAINERS: Add ROHM BD72720 PMIC power: supply: bd71828-power: Support ROHM BD72720 power: supply: bd71828: Support wider register addresses ...

Merge tag 'pwrseq-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2026-02-11T18:45:11+00:00

Pull power sequencing updates from Bartosz Golaszewski: "One new driver and support for more models added to the existing qcom-wcn driver as well as some minor tweaks and fixes. New drivers: - add the power sequencing driver for PCIe M.2 connectors Driver improvements: - use device_get_match_data() where applicable - add support for the WCN39xx family of models to pwrseq-qcom-wcn Fixes: - fix a locking issue in pwrseq core - fix retval check in pwrseq-qcom-wcn" * tag 'pwrseq-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: power: sequencing: qcom-wcn: fix error path for VDDIO handling power: sequencing: fix missing state_lock in pwrseq_power_on() error path power: sequencing: Add the Power Sequencing driver for the PCIe M.2 connectors dt-bindings: connector: Add PCIe M.2 Mechanical Key M connector power: sequencing: qcom-wcn: add support for WCN39xx regulator: dt-bindings: qcom,wcn3990-pmu: describe PMUs on WCN39xx power: sequencing: qcom-wcn: use device_get_match_data()

Samsung S2MPG10 regulator and S2MPG11 PMIC drivers

2026-02-05T00:07:58+00:00

Merge series from André Draszik : This series extends the existing S2MPG10 PMIC driver to add support for the regulators, and adds new S2MPG11 core and regulator drivers. The patches are kept together in one series, due to S2MPG11 and its regulators being very similar to S2MPG10. The Samsung S2MPG11 PMIC is a Power Management IC for mobile applications with buck converters, various LDOs, power meters, and additional GPIO interfaces. It typically complements an S2MPG10 PMIC in a main/sub configuration as the sub-PMIC and both are used on the Google Pixel 6 and 6 Pro (oriole / raven). A DT update for Oriole / Raven to enable these is required which I will send out separately.

regulator: dt-bindings: add s2mpg11-pmic regulators

2026-02-04T13:35:31+00:00

The S2MPG11 PMIC is a Power Management IC for mobile applications with buck converters, various LDOs, power meters, NTC thermistor inputs, and additional GPIO interfaces. It typically complements an S2MPG10 PMIC in a main/sub configuration as the sub-PMIC. S2MPG11 has 12 buck, 1 buck-boost, and 15 LDO rails. Several of these can either be controlled via software (register writes) or via external signals, in particular by: * one out of several input pins connected to a main processor's: * GPIO pins * other pins that are e.g. firmware- or power-domain-controlled without explicit driver intervention * a combination of input pins and register writes. Control via input pins allows PMIC rails to be controlled by firmware, e.g. during standby/suspend, or as part of power domain handling where otherwise that would not be possible. Additionally toggling a pin is faster than register writes, and it also allows the PMIC to ensure that any necessary timing requirements between rails are respected automatically if multiple rails are to be enabled or disabled quasi simultaneously. While external control via input pins appears to exist on other versions of this PMIC, there is more flexibility in this version, in particular there is a selection of input pins to choose from for each rail (which must therefore be configured accordingly if in use), whereas other versions don't have this flexibility. Add documentation related to the regulator (buck & ldo) parts like devicetree definitions, regulator naming patterns, and additional properties. Since S2MPG11 is typically used as the sub-PMIC together with an S2MPG10 as the main-PMIC, the datasheet and the binding both suffix the rails with an 's'. Reviewed-by: Krzysztof Kozlowski Signed-off-by: André Draszik Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-3-3b1f9831fffd@linaro.org Signed-off-by: Mark Brown

regulator: dt-bindings: add s2mpg10-pmic regulators

2026-02-04T13:35:30+00:00

The S2MPG10 PMIC is a Power Management IC for mobile applications with buck converters, various LDOs, power meters, RTC, clock outputs, and additional GPIO interfaces. It has 10 buck and 31 LDO rails. Several of these can either be controlled via software (register writes) or via external signals, in particular by: * one out of several input pins connected to a main processor's: * GPIO pins * other pins that are e.g. firmware- or power-domain-controlled without explicit driver intervention * a combination of input pins and register writes. Control via input pins allows PMIC rails to be controlled by firmware, e.g. during standby/suspend, or as part of power domain handling where otherwise that would not be possible. Additionally toggling a pin is faster than register writes, and it also allows the PMIC to ensure that any necessary timing requirements between rails are respected automatically if multiple rails are to be enabled or disabled quasi simultaneously. While external control via input pins appears to exist on other versions of this PMIC, there is more flexibility in this version, in particular there is a selection of input pins to choose from for each rail (which must therefore be configured accordingly if in use), whereas other versions don't have this flexibility. Add documentation related to the regulator (buck & ldo) parts like devicetree definitions, regulator naming patterns, and additional properties. S2MPG10 is typically used as the main-PMIC together with an S2MPG11 PMIC in a main/sub configuration, hence the datasheet and the binding both suffix the rails with an 'm'. Reviewed-by: Krzysztof Kozlowski Signed-off-by: André Draszik Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-2-3b1f9831fffd@linaro.org Signed-off-by: Mark Brown

dt-bindings: regulator: mark regulator-suspend-microvolt as deprecated

2026-01-19T14:42:46+00:00

The Documentation/devicetree/bindings/regulator/regulator.yaml already states in its description that regulator-suspend-microvolt is deprecated, but the schema did not formally mark it as such. Add the `deprecated: true` annotation to regulator-suspend-microvolt so that this is enforced at the schema level. Signed-off-by: Peng Fan Link: https://patch.msgid.link/20260119-regulator-binding-v1-1-e55d33b4c3e3@nxp.com Signed-off-by: Mark Brown

regulator: dt-bindings: rpi-panel: Mark 7" Raspberry Pi as GPIO controller

2026-01-13T16:40:25+00:00

Mark the Raspberry Pi 7" Display 1 ATTINY based regulator as GPIO controller, because the hardware behaves that way in addition to being a regulator. Add fixed gpio-cells as well. Signed-off-by: Marek Vasut Link: https://patch.msgid.link/20260107213638.505319-1-marex@nabladev.com Signed-off-by: Mark Brown