kernel/linux.git/Documentation/devicetree/bindings/regulator, branch v5.16

Merge tag 'regulator-fix-v5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

2021-12-20T18:13:30+00:00

Pull regulator fix from Mark Brown: "Binding fix for v5.16 This fixes problems validating DT bindings using op_mode which wasn't described as it should have been when converting to DT schema" * tag 'regulator-fix-v5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: dt-bindings: samsung,s5m8767: add missing op_mode to bucks

regulator: dt-bindings: samsung,s5m8767: add missing op_mode to bucks

2021-12-06T13:49:07+00:00

While converting bindings to dtschema, the buck regulators lost "op_mode" property. The "op_mode" is a valid property for all regulators (both LDOs and bucks), so add it. Reported-by: Rob Herring Fixes: fab58debc137 ("regulator: dt-bindings: samsung,s5m8767: convert to dtschema") Cc: Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20211206124306.14006-1-krzysztof.kozlowski@canonical.com Signed-off-by: Mark Brown

dt-bindings: treewide: Update @st.com email address to @foss.st.com

2021-11-12T04:27:16+00:00

Not all @st.com email address are concerned, only people who have a specific @foss.st.com email will see their entry updated. For some people, who left the company, remove their email. Cc: Alexandre Torgue Cc: Arnaud Pouliquen Cc: Fabien Dessenne Cc: Christophe Roullier Cc: Gabriel Fernandez Cc: Lionel Debieve Cc: Amelie Delaunay Cc: Pierre-Yves MORDRET Cc: Ludovic Barre Cc: Christophe Kerello Cc: pascal Paillet Cc: Erwan Le Ray Cc: Philippe CORNU Cc: Yannick Fertre Cc: Fabrice Gasnier Cc: Olivier Moysan Cc: Hugues Fruchet Signed-off-by: Patrice Chotard Reviewed-by: Mathieu Poirier Acked-by: Krzysztof Kozlowski Acked-by: Mark Brown Acked-by: Lee Jones Acked-By: Vinod Koul Acked-by: Miquel Raynal Link: https://lore.kernel.org/r/20211110150144.18272-6-patrice.chotard@foss.st.com Signed-off-by: Rob Herring

Merge tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2021-11-08T20:07:52+00:00

Pull MFD updates from Lee Jones: "Removed Drivers: - Remove support for TI TPS80031/TPS80032 PMICs New Device Support: - Add support for Magnetic Reader to TI AM335x - Add support for DA9063_EA to Dialog DA9063 - Add support for SC2730 PMIC to Spreadtrum SC27xx - Add support for MacBookPro16,2 ICL-N UART Intel LPSS PCI - Add support for lots of new PMICS in QCom SPMI PMIC - Add support for ADC to Diolan DLN2 New Functionality: - Add support for Power Off to Rockchip RK817 Fix-ups: - Simplify Regmap passing to child devices in hi6421-spmi-pmic - SPDX licensing updates in ti_am335x_tscadc - Improve error handling in ti_am335x_tscadc - Expedite clock search in ti_am335x_tscadc - Generic simplifications in ti_am335x_tscadc - Use generic macros/defines in ti_am335x_tscadc - Remove unused code in ti_am335x_tscadc, cros_ec_dev - Convert to GPIOD in wcd934x - Add namespacing in ti_am335x_tscadc - Restrict compilation to relevant arches in intel_pmt - Provide better description/documentation in exynos_lpass - Add SPI device ID table in altera-a10sr, motorola-cpcap, sprd-sc27xx-spi - Change IRQ handling in qcom-pm8xxx - Split out I2C and SPI code in arizona - Explicitly include used headers in altera-a10sr - Convert sysfs show() function to in sysfs_emit - Standardise *_exit() and *_remove() return values in mc13xxx, stmpe, tps65912 - Trivial (style/spelling/whitespace) fixups in ti_am335x_tscadc, qcom-spmi-pmic, max77686-private - Device Tree fix-ups in ti,am3359-tscadc, samsung,s2mps11, samsung,s2mpa01, samsung,s5m8767, brcm,misc, brcm,cru, syscon, qcom,tcsr, xylon,logicvc, max77686, x-powers,ac100, x-powers,axp152, x-powers,axp209-gpio, syscon, qcom,spmi-pmic Bug Fixes: - Balance refcounting (get/put) in ti_am335x_tscadc, mfd-core - Fix IRQ trigger type in sec-irq, max77693, max14577 - Repair off-by-one in altera-sysmgr - Add explicit 'select MFD_CORE' to MFD_SIMPLE_MFD_I2C" * tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (95 commits) mfd: simple-mfd-i2c: Select MFD_CORE to fix build error mfd: tps80031: Remove driver mfd: max77686: Correct tab-based alignment of register addresses mfd: wcd934x: Replace legacy gpio interface for gpiod dt-bindings: mfd: qcom: pm8xxx: Add pm8018 compatible mfd: dln2: Add cell for initializing DLN2 ADC mfd: qcom-spmi-pmic: Add missing PMICs supported by socinfo mfd: qcom-spmi-pmic: Document ten more PMICs in the binding mfd: qcom-spmi-pmic: Sort compatibles in the driver mfd: qcom-spmi-pmic: Sort the compatibles in the binding mfd: janz-cmoio: Replace snprintf in show functions with sysfs_emit mfd: altera-a10sr: Include linux/module.h mfd: tps65912: Make tps65912_device_exit() return void mfd: stmpe: Make stmpe_remove() return void mfd: mc13xxx: Make mc13xxx_common_exit() return void dt-bindings: mfd: syscon: Add samsung,exynosautov9-sysreg compatible mfd: altera-sysmgr: Fix a mistake caused by resource_size conversion dt-bindings: gpio: Convert X-Powers AXP209 GPIO binding to a schema dt-bindings: mfd: syscon: Add rk3368 QoS register compatible mfd: arizona: Split of_match table into I2C and SPI versions ...

mfd: max77686: Do not enforce (incorrect) interrupt trigger type

2021-11-05T14:40:06+00:00

Interrupt line can be configured on different hardware in different way, even inverted. Therefore driver should not enforce specific trigger type - edge falling - but instead rely on Devicetree to configure it. The Maxim 77686 datasheet describes the interrupt line as active low with a requirement of acknowledge from the CPU therefore the edge falling is not correct. The interrupt line is shared between PMIC and RTC driver, so using level sensitive interrupt is here especially important to avoid races. With an edge configuration in case if first PMIC signals interrupt followed shortly after by the RTC, the interrupt might not be yet cleared/acked thus the second one would not be noticed. Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20210602110445.33536-2-krzysztof.kozlowski@canonical.com

Merge series "regulator: Introduce UniPhier NX1 SoC support" from Kunihiko Hayashi :

2021-10-22T00:51:36+00:00

This series includes the patches to add basic support for new UniPhier NX1 SoC. NX1 SoC also has the same kinds of controls as the other UniPhier SoCs. Kunihiko Hayashi (2): dt-bindings: regulator: uniphier: Add binding for NX1 SoC regulator: uniphier: Add USB-VBUS compatible string for NX1 SoC .../devicetree/bindings/regulator/socionext,uniphier-regulator.yaml | 1 + drivers/regulator/uniphier-regulator.c | 4 ++++ 2 files changed, 5 insertions(+) -- 2.7.4

regulator: uniphier: Add binding for NX1 SoC

2021-10-21T15:08:08+00:00

Update USB-VBUS binding document for UniPhier NX1 SoC. Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/1634520605-16583-2-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Mark Brown

regulator: qcom,rpmh: Add compatible for PM6350

2021-10-21T13:19:11+00:00

Add compatible string for pm6350 used in sm6350 boards. Signed-off-by: Luca Weiss Link: https://lore.kernel.org/r/20211007212444.328034-3-luca@z3ntu.xyz Signed-off-by: Mark Brown

Merge tag 'tags/s2m_s5m_dtschema' into tb-mfd-from-regulator-5.16

2021-10-21T09:44:38+00:00

regulator/clock: Convert the s2m and s5m DT bindings to schema Tagged to allow further bindings to rely on these. Signed-off-by: Lee Jones

Merge series "regulator/mfd/clock: dt-bindings: Samsung S2M and S5M to dtschema" from Krzysztof Kozlowski :

2021-10-08T18:47:33+00:00

Hi All, Changes since v2 ================ 1. Add Stephen's and Rob's tags. 2. Correct inb-supply description in patch 10/10. Changes since v2 ================ 1. Add Rob's tags. 2. Remove "regulator-name" from properties (all regulator dtschema). 3. Move "unevaluatedProperties" higher to make code easier to read (all regulator dtschema). 4. Add ref-type to op-mode property (patch 6: s5m8767 regulators). Changes since v1 ================ 1. Drop DTS patches - applied. 2. Fully remove bindings/regulator/samsung,s5m8767.txt . 3. Minor subject reformatting and few typos in text. Intro ===== This patchset converts all devicetree bindings of Samsung S2M and S5M PMIC devices from txt to dtschema. It includes also two fixes because later conversion depends on it (contextually). Merging/dependencies ==================== 1. Regulator related binding changes depend on first two commits (the fixes), because of context. 2. The mfd bindings depend on clock and regulator bindings. The fixes and bindings changes (patches 1-10) should go via the same tree. For example regulator or mfd tree. Another alternative is that regulator patches (1-2, 4-6) go via Mark who later gives MFD a stable branch/tag to pull. Then the clock and MFD bindings would go on top via MFD tree. Or any other setup you would like to have. Overview of devices =================== Essentially all Samsung S2M and S5M PMICs are very similar devices. They provide the same functionality: regulators, RTC, 2 or 3 clocks and main power management (e.g. power cut to SoC). The differences are mostly in registers layout and number of regulators. The drivers are built around one common part, mfd/sec-core.c, and share some drivers between devices: 1. MFD sec-core for all devices, 1. one clock driver for most of devices, 2. one RTC driver for all devices, 3. three regulator drivers. The regulator drivers were implementing slightly different features, therefore one regulator binding for all devices does not make much sense. However the clock device binding can be shared. The final dtschema bindings try to implement this - share only the clock bindings. Best regards, Krzysztof Krzysztof Kozlowski (10): regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property dt-bindings: clock: samsung,s2mps11: convert to dtschema regulator: dt-bindings: samsung,s2m: convert to dtschema regulator: dt-bindings: samsung,s2mpa01: convert to dtschema regulator: dt-bindings: samsung,s5m8767: convert to dtschema dt-bindings: mfd: samsung,s2mps11: convert to dtschema dt-bindings: mfd: samsung,s2mpa01: convert to dtschema dt-bindings: mfd: samsung,s5m8767: convert to dtschema dt-bindings: mfd: samsung,s5m8767: document buck and LDO supplies .../bindings/clock/samsung,s2mps11.txt | 49 --- .../bindings/clock/samsung,s2mps11.yaml | 45 +++ .../bindings/mfd/samsung,s2mpa01.yaml | 91 ++++++ .../bindings/mfd/samsung,s2mps11.yaml | 267 +++++++++++++++ .../bindings/mfd/samsung,s5m8767.yaml | 307 ++++++++++++++++++ .../bindings/mfd/samsung,sec-core.txt | 86 ----- .../bindings/regulator/samsung,s2mpa01.txt | 79 ----- .../bindings/regulator/samsung,s2mpa01.yaml | 62 ++++ .../bindings/regulator/samsung,s2mps11.txt | 102 ------ .../bindings/regulator/samsung,s2mps11.yaml | 44 +++ .../bindings/regulator/samsung,s2mps13.yaml | 44 +++ .../bindings/regulator/samsung,s2mps14.yaml | 44 +++ .../bindings/regulator/samsung,s2mps15.yaml | 44 +++ .../bindings/regulator/samsung,s2mpu02.yaml | 44 +++ .../bindings/regulator/samsung,s5m8767.txt | 145 --------- .../bindings/regulator/samsung,s5m8767.yaml | 74 +++++ MAINTAINERS | 9 +- drivers/regulator/s5m8767.c | 21 +- 18 files changed, 1080 insertions(+), 477 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/samsung,s2mps11.txt create mode 100644 Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml delete mode 100644 Documentation/devicetree/bindings/mfd/samsung,sec-core.txt delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml -- 2.30.2