kernel/linux.git/Documentation/devicetree/bindings/phy, branch v7.0-rc7

Merge tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

2026-02-17T19:40:04+00:00

Pull phy updates from Vinod Koul: "Core: - Add suuport for "rx-polarity" and "tx-polarity" device tree properties and phy common properties to manage this New Support: - Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy, USB UNI PHY and SMB2370 eUSB2 repeater. SC8280xp QMP UFS PHY, Kaanapali PCIe phy and QMP PHY, QCS615 QMP USB3+DP PHY and driver support for that. - SpacemiT PCIe/combo PHY and K1 USB2 PHY driver. - HDMI 2.1 FRL configuration support and driver enabling for rockchip samsung-hdptx driver - TI TCAN1046 phy - Renesas RZ/V2H(P) and RZ/V2N usb3 - Mediatek MT8188 hdmi-phy - Google Tensor SoC USB PHY driver - Apple Type-C PHY Updates: - Subsystem conversion for clock round_rate() to determine_rate() - TI USB3 DT schema conversion - Samsung ExynosAutov920 usb3, combo hsphy and ssphy support" * tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (143 commits) phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate() dt-bindings: phy: ti,control-phy-otghs: convert to DT schema dt-bindings: phy: ti,phy-usb3: convert to DT schema phy: tegra: xusb: Remove unused powered_on variable phy: renesas: rcar-gen3-usb2: add regulator dependency phy: GOOGLE_USB: add TYPEC dependency phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY phy: renesas: rcar-gen3-usb2: Use mux-state for phyrst management phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable() phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC dt-bindings: phy: renesas,usb2-phy: Document mux-states property dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config phy: rockchip: samsung-hdptx: Drop hw_rate driver data phy: rockchip: samsung-hdptx: Compute clk rate from PLL config phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists ...

Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2026-02-12T03:31:52+00:00

Pull networking updates from Paolo Abeni: "Core & protocols: - A significant effort all around the stack to guide the compiler to make the right choice when inlining code, to avoid unneeded calls for small helper and stack canary overhead in the fast-path. This generates better and faster code with very small or no text size increases, as in many cases the call generated more code than the actual inlined helper. - Extend AccECN implementation so that is now functionally complete, also allow the user-space enabling it on a per network namespace basis. - Add support for memory providers with large (above 4K) rx buffer. Paired with hw-gro, larger rx buffer sizes reduce the number of buffers traversing the stack, dincreasing single stream CPU usage by up to ~30%. - Do not add HBH header to Big TCP GSO packets. This simplifies the RX path, the TX path and the NIC drivers, and is possible because user-space taps can now interpret correctly such packets without the HBH hint. - Allow IPv6 routes to be configured with a gateway address that is resolved out of a different interface than the one specified, aligning IPv6 to IPv4 behavior. - Multi-queue aware sch_cake. This makes it possible to scale the rate shaper of sch_cake across multiple CPUs, while still enforcing a single global rate on the interface. - Add support for the nbcon (new buffer console) infrastructure to netconsole, enabling lock-free, priority-based console operations that are safer in crash scenarios. - Improve the TCP ipv6 output path to cache the flow information, saving cpu cycles, reducing cache line misses and stack use. - Improve netfilter packet tracker to resolve clashes for most protocols, avoiding unneeded drops on rare occasions. - Add IP6IP6 tunneling acceleration to the flowtable infrastructure. - Reduce tcp socket size by one cache line. - Notify neighbour changes atomically, avoiding inconsistencies between the notification sequence and the actual states sequence. - Add vsock namespace support, allowing complete isolation of vsocks across different network namespaces. - Improve xsk generic performances with cache-alignment-oriented optimizations. - Support netconsole automatic target recovery, allowing netconsole to reestablish targets when underlying low-level interface comes back online. Driver API: - Support for switching the working mode (automatic vs manual) of a DPLL device via netlink. - Introduce PHY ports representation to expose multiple front-facing media ports over a single MAC. - Introduce "rx-polarity" and "tx-polarity" device tree properties, to generalize polarity inversion requirements for differential signaling. - Add helper to create, prepare and enable managed clocks. Device drivers: - Add Huawei hinic3 PF etherner driver. - Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet controller. - Add ethernet driver for MaxLinear MxL862xx switches - Remove parallel-port Ethernet driver. - Convert existing driver timestamp configuration reporting to hwtstamp_get and remove legacy ioctl(). - Convert existing drivers to .get_rx_ring_count(), simplifing the RX ring count retrieval. Also remove the legacy fallback path. - Ethernet high-speed NICs: - Broadcom (bnxt, bng): - bnxt: add FW interface update to support FEC stats histogram and NVRAM defragmentation - bng: add TSO and H/W GRO support - nVidia/Mellanox (mlx5): - improve latency of channel restart operations, reducing the used H/W resources - add TSO support for UDP over GRE over VLAN - add flow counters support for hardware steering (HWS) rules - use a static memory area to store headers for H/W GRO, leading to 12% RX tput improvement - Intel (100G, ice, idpf): - ice: reorganizes layout of Tx and Rx rings for cacheline locality and utilizes __cacheline_group* macros on the new layouts - ice: introduces Synchronous Ethernet (SyncE) support - Meta (fbnic): - adds debugfs for firmware mailbox and tx/rx rings vectors - Ethernet virtual: - geneve: introduce GRO/GSO support for double UDP encapsulation - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - some code refactoring and cleanups - RealTek (r8169): - add support for RTL8127ATF (10G Fiber SFP) - add dash and LTR support - Airoha: - AN8811HB 2.5 Gbps phy support - Freescale (fec): - add XDP zero-copy support - Thunderbolt: - add get link setting support to allow bonding - Renesas: - add support for RZ/G3L GBETH SoC - Ethernet switches: - Maxlinear: - support R(G)MII slow rate configuration - add support for Intel GSW150 - Motorcomm (yt921x): - add DCB/QoS support - TI: - icssm-prueth: support bridging (STP/RSTP) via the switchdev framework - Ethernet PHYs: - Realtek: - enable SGMII and 2500Base-X in-band auto-negotiation - simplify and reunify C22/C45 drivers - Micrel: convert bindings to DT schema - CAN: - move skb headroom content into skb extensions, making CAN metadata access more robust - CAN drivers: - rcar_canfd: - add support for FD-only mode - add support for the RZ/T2H SoC - sja1000: cleanup the CAN state handling - WiFi: - implement EPPKE/802.1X over auth frames support - split up drop reasons better, removing generic RX_DROP - additional FTM capabilities: 6 GHz support, supported number of spatial streams and supported number of LTF repetitions - better mac80211 iterators to enumerate resources - initial UHR (Wi-Fi 8) support for cfg80211/mac80211 - WiFi drivers: - Qualcomm/Atheros: - ath11k: support for Channel Frequency Response measurement - ath12k: a significant driver refactor to support multi-wiphy devices and and pave the way for future device support in the same driver (rather than splitting to ath13k) - ath12k: support for the QCC2072 chipset - Intel: - iwlwifi: partial Neighbor Awareness Networking (NAN) support - iwlwifi: initial support for U-NII-9 and IEEE 802.11bn - RealTek (rtw89): - preparations for RTL8922DE support - Bluetooth: - implement setsockopt(BT_PHY) to set the connection packet type/PHY - set link_policy on incoming ACL connections - Bluetooth drivers: - btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE - btqca: add WCN6855 firmware priority selection feature" * tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits) bnge/bng_re: Add a new HSI net: macb: Fix tx/rx malfunction after phy link down and up af_unix: Fix memleak of newsk in unix_stream_connect(). net: ti: icssg-prueth: Add optional dependency on HSR net: dsa: add basic initial driver for MxL862xx switches net: mdio: add unlocked mdiodev C45 bus accessors net: dsa: add tag format for MxL862xx switches dt-bindings: net: dsa: add MaxLinear MxL862xx selftests: drivers: net: hw: Modify toeplitz.c to poll for packets octeontx2-pf: Unregister devlink on probe failure net: renesas: rswitch: fix forwarding offload statemachine ionic: Rate limit unknown xcvr type messages tcp: inet6_csk_xmit() optimization tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock() tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect() ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6 ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update() ipv6: use np->final in inet6_sk_rebuild_header() ipv6: add daddr/final storage in struct ipv6_pinfo net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup() ...

dt-bindings: phy: ti,control-phy-otghs: convert to DT schema

2026-02-04T15:31:08+00:00

Convert TI OMAP Control PHY binding to DT schema. Reviewed-by: Rob Herring (Arm) Signed-off-by: Charan Pedumuru Link: https://patch.msgid.link/20260123-ti-phy-v4-3-b557e2c46e6f@gmail.com Signed-off-by: Vinod Koul

dt-bindings: phy: ti,phy-usb3: convert to DT schema

2026-02-04T15:31:08+00:00

Convert TI PIPE3 PHY binding to DT schema. Changes during conversion: - Define a new pattern 'pcie-phy' to match nodes defined in DT. - Drop obsolete "id" property from the schema. Signed-off-by: Charan Pedumuru Reviewed-by: Rob Herring (Arm) Link: https://patch.msgid.link/20260123-ti-phy-v4-2-b557e2c46e6f@gmail.com Signed-off-by: Vinod Koul

BackMerge tag 'v6.19-rc7' into drm-next

2026-01-28T02:44:28+00:00

Linux 6.19-rc7 This is needed for msm and rust trees. Signed-off-by: Dave Airlie

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2026-01-23T04:14:36+00:00

Cross-merge networking fixes after downstream PR (net-6.19-rc7). Conflicts: drivers/net/ethernet/huawei/hinic3/hinic3_irq.c b35a6fd37a00 ("hinic3: Add adaptive IRQ coalescing with DIM") fb2bb2a1ebf7 ("hinic3: Fix netif_queue_set_napi queue_index input parameter error") https://lore.kernel.org/fc0a7fdf08789a52653e8ad05281a0a849e79206.1768915707.git.zhuyikai1@h-partners.com drivers/net/wireless/ath/ath12k/mac.c drivers/net/wireless/ath/ath12k/wifi7/hw.c 31707572108d ("wifi: ath12k: Fix wrong P2P device link id issue") c26f294fef2a ("wifi: ath12k: Move ieee80211_ops callback to the arch specific module") https://lore.kernel.org/20260114123751.6a208818@canb.auug.org.au Adjacent changes: drivers/net/wireless/ath/ath12k/mac.c 8b8d6ee53dfd ("wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channel") 914c890d3b90 ("wifi: ath12k: Add framework for hardware specific ieee80211_ops registration") Signed-off-by: Jakub Kicinski

dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC

2026-01-21T08:46:02+00:00

Document USB2.0 phy bindings for RZ/G3E ("R9A09G047") SoC. The RZ/G3E USB2.0 phy is functionally identical to the one found on the RZ/V2H(P), so no driver changes are needed. The existing "renesas,usb2-phy-r9a09g057" will be used as a fallback compatible for this IP. Acked-by: Conor Dooley Signed-off-by: Tommaso Merciai Link: https://patch.msgid.link/4f2454708428b48e03faabe79e383999fb1ab458.1766405010.git.tommaso.merciai.xr@bp.renesas.com Signed-off-by: Vinod Koul

dt-bindings: phy: renesas,usb2-phy: Document mux-states property

2026-01-21T08:46:02+00:00

Some Renesas SoCs, such as RZ/G3E, provide a USB2.0 OTG PHY with configurable VBUS control through a multiplexed hardware register. This register allows selecting the VBUS source via a mux control line exposed by the PHY. To represent this hardware configuration, support the standard `mux-states` property in the Renesas USB2 PHY binding. This allows the DeviceTree to model the VBUS source selection as a mux, consistent with generic binding conventions. Acked-by: Conor Dooley Signed-off-by: Tommaso Merciai Link: https://patch.msgid.link/36d448dd10bbb2bbfa5b1b6b6e3fee86c34d01aa.1766405010.git.tommaso.merciai.xr@bp.renesas.com Signed-off-by: Vinod Koul

dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator

2026-01-21T08:46:02+00:00

Document the 'vbus-regulator' child node in the Renesas USB2 PHY binding to describe the internal USB VBUS regulator. Require this regulator node on OTG channels to accurately represent hardware dependencies in the device tree. Documenting this regulator allows device trees to model the VBUS power requirements of these SoCs properly. Acked-by: Conor Dooley Signed-off-by: Tommaso Merciai Link: https://patch.msgid.link/aaa8044283eb736817afd43d4fba3aa93b50b1dd.1766405010.git.tommaso.merciai.xr@bp.renesas.com Signed-off-by: Vinod Koul

dt-bindings: phy: mediatek,hdmi-phy: Document extra clocks for MT8195

2026-01-17T00:10:01+00:00

MT8195's HDMI PHY block has 4 clocks instead of just a single one. Describe the extra clocks for it. Signed-off-by: Nícolas F. R. A. Prado Signed-off-by: Louis-Alexis Eyraud Reviewed-by: Rob Herring (Arm) Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20251217-mtk-genio-evk-hdmi-support-v2-3-a994976bb39a@collabora.com/ Signed-off-by: Chun-Kuang Hu