kernel/linux.git/Documentation/devicetree/bindings/phy, branch v6.12.80

dt-bindings: phy: qcom-edp: Add missing clock for X Elite

2026-03-04T12:20:48+00:00

commit 6b99eeacf6abb1ff2d6463c84e490343f39cf11a upstream. On X Elite platform, the eDP PHY uses one more clock called ref. The current X Elite devices supported upstream work fine without this clock, because the boot firmware leaves this clock enabled. But we should not rely on that. Also, even though this change breaks the ABI, it is needed in order to make the driver disables this clock along with the other ones, for a proper bring-down of the entire PHY. So attach the this ref clock to the PHY. Cc: stable@vger.kernel.org # v6.10 Fixes: 5d5607861350 ("dt-bindings: phy: qcom-edp: Add X1E80100 PHY compatibles") Reviewed-by: Krzysztof Kozlowski Reviewed-by: Bjorn Andersson Signed-off-by: Abel Vesa Link: https://patch.msgid.link/20251224-phy-qcom-edp-add-missing-refclk-v5-1-3f45d349b5ac@oss.qualcomm.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dt-bindings: phy: rockchip-inno-csi-dphy: make power-domains non-required

2025-10-19T14:33:45+00:00

commit c254815b02673cc77a84103c4c0d6197bd90c0ef upstream. There are variants of the Rockchip Innosilicon CSI DPHY (e.g., the RK3568 variant) that are powered on by default as they are part of the ALIVE power domain. Remove 'power-domains' from the required properties in order to avoid false positives. Fixes: 22c8e0a69b7f ("dt-bindings: phy: add compatible for rk356x to rockchip-inno-csi-dphy") Cc: stable@kernel.org Reviewed-by: Krzysztof Kozlowski Signed-off-by: Michael Riesch Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-2-a4f340a7f0cf@collabora.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dt-bindings: phy: imx8mq-usb: fix fsl,phy-tx-vboost-level-microvolt property

2025-06-10T11:13:00+00:00

commit 5b3a91b207c00a8d27f75ce8aaa9860844da72c8 upstream. The ticket TKT0676370 shows the description of TX_VBOOST_LVL is wrong in register PHY_CTRL3 bit[31:29]. 011: Corresponds to a launch amplitude of 1.12 V. 010: Corresponds to a launch amplitude of 1.04 V. 000: Corresponds to a launch amplitude of 0.88 V. After updated: 011: Corresponds to a launch amplitude of 0.844 V. 100: Corresponds to a launch amplitude of 1.008 V. 101: Corresponds to a launch amplitude of 1.156 V. This will correct it accordingly. Fixes: b2e75563dc39 ("dt-bindings: phy: imx8mq-usb: add phy tuning properties") Cc: stable@vger.kernel.org Reviewed-by: Jun Li Signed-off-by: Xu Yang Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250430094502.2723983-1-xu.yang_2@nxp.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Fix X1E80100 resets entries

2024-10-21T18:03:25+00:00

The PCIe 6a PHY is actually Gen4 4-lanes capable. So the gen4x4 compatible describes it. But according to the schema, currently the gen4x4 compatible doesn't require both PHY and PHY-nocsr resets, while the HW does. So fix that by adding the gen4x4 compatible alongside the gen4x2 one for the resets description. Fixes: 0c5f4d23f776 ("dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x4") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202410182029.n2zPkuGx-lkp@intel.com/ Reviewed-by: Krzysztof Kozlowski Reviewed-by: Johan Hovold Signed-off-by: Abel Vesa Link: https://lore.kernel.org/r/20241021-phy-qcom-qmp-pcie-fix-x1e80100-gen4x4-resets-v3-1-1918c46fc37c@linaro.org Signed-off-by: Vinod Koul

dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: add missing x1e80100 pipediv2 clocks

2024-10-17T13:01:17+00:00

The x1e80100 QMP PCIe PHYs all have a pipediv2 clock that needs to be described. Fixes: e94b29f2bd73 ("dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHYs") Cc: Abel Vesa Signed-off-by: Johan Hovold Acked-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20240916082307.29393-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul

Merge tag 'usb-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2024-09-26T16:45:36+00:00

Pull USB/Thunderbolt updates from Greg KH: "Here is the large set of USB and Thunderbolt changes for 6.12-rc1. Nothing "major" in here, except for a new 9p network gadget that has been worked on for a long time (all of the needed acks are here) Other than that, it's the usual set of: - Thunderbolt / USB4 driver updates and additions for new hardware - dwc3 driver updates and new features added - xhci driver updates - typec driver updates - USB gadget updates and api additions to make some gadgets more configurable by userspace - dwc2 driver updates - usb phy driver updates - usbip feature additions - other minor USB driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'usb-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits) sub: cdns3: Use predefined PCI vendor ID constant sub: cdns2: Use predefined PCI vendor ID constant USB: misc: yurex: fix race between read and write USB: misc: cypress_cy7c63: check for short transfer USB: appledisplay: close race between probe and completion handler USB: class: CDC-ACM: fix race between get_serial and set_serial usb: r8a66597-hcd: make read-only const arrays static usb: typec: ucsi: Fix busy loop on ASUS VivoBooks usb: dwc3: rtk: Clean up error code in __get_dwc3_maximum_speed() usb: storage: ene_ub6250: Fix right shift warnings usb: roles: Improve the fix for a false positive recursive locking complaint locking/mutex: Introduce mutex_init_with_key() locking/mutex: Define mutex_init() once net/9p/usbg: fix CONFIG_USB_GADGET dependency usb: xhci: fix loss of data on Cadence xHC usb: xHCI: add XHCI_RESET_ON_RESUME quirk for Phytium xHCI host usb: dwc3: imx8mp: disable SS_CON and U3 wakeup for system sleep usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support ...

Merge tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

2024-09-23T21:05:10+00:00

Pull phy updates from Vinod Koul: "New hw support: - Rcar usb2 support for RZ/G3S SoC - Nuvoton MA35 SoC USB 2.0 PHY driver Removed: - obsolete qcom,usb-8x16-phy bindings Updates: - 4 lane PCIe support for Qualcomm X1E80100 - Constify structure in subsystem update - Subsystem simplification with scoped for each OF child loop update - Yaml conversion for Qualcomm sata phy, Hiilicon hi3798cv200-combphy bindings" * tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits) phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings phy: renesas: rcar-gen3-usb2: Add support to initialize the bus phy: ti: j721e-wiz: Simplify with scoped for each OF child loop phy: ti: j721e-wiz: Drop OF node reference earlier for simpler code phy: ti: gmii-sel: Simplify with dev_err_probe() phy: ti: am654-serdes: Use scoped device node handling to simplify error paths phy: qcom: qmp-pcie-msm8996: Simplify with scoped for each OF child loop phy: mediatek: xsphy: Simplify with scoped for each OF child loop phy: mediatek: tphy: Simplify with scoped for each OF child loop phy: hisilicon: usb2: Simplify with scoped for each OF child loop phy: cadence: sierra: Simplify with scoped for each OF child loop phy: broadcom: brcm-sata: Simplify with scoped for each OF child loop phy: broadcom: bcm-cygnus-pcie: Simplify with scoped for each OF child loop phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings phy: qcom: qmp-pcie: Configure all tables on port B PHY phy: airoha: adjust initialization delay in airoha_pcie_phy_init() dt-bindings: phy: socionext,uniphier: add top-level constraints phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100 ...

Merge tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel

2024-09-19T08:18:15+00:00

Pull drm updates from Dave Airlie: "This adds a couple of patches outside the drm core, all should be acked appropriately, the string and pstore ones are the main ones that come to mind. Otherwise it's the usual drivers, xe is getting enabled by default on some new hardware, we've changed the device number handling to allow more devices, and we added some optional rust code to create QR codes in the panic handler, an idea first suggested I think 10 years ago :-) string: - add mem_is_zero() core: - support more device numbers - use XArray for minor ids - add backlight constants - Split dma fence array creation into alloc and arm fbdev: - remove usage of old fbdev hooks kms: - Add might_fault() to drm_modeset_lock priming - Add dynamic per-crtc vblank configuration support dma-buf: - docs cleanup buddy: - Add start address support for trim function printk: - pass description to kmsg_dump scheduler: - Remove full_recover from drm_sched_start ttm: - Make LRU walk restartable after dropping locks - Allow direct reclaim to allocate local memory panic: - add display QR code (in rust) displayport: - mst: GUID improvements bridge: - Silence error message on -EPROBE_DEFER - analogix: Clean aup - bridge-connector: Fix double free - lt6505: Disable interrupt when powered off - tc358767: Make default DP port preemphasis configurable - lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR - anx7625: simplify OF array handling - dw-hdmi: simplify clock handling - lontium-lt8912b: fix mode validation - nwl-dsi: fix mode vsync/hsync polarity xe: - Enable LunarLake and Battlemage support - Introducing Xe2 ccs modifiers for integrated and discrete graphics - rename xe perf to xe observation - use wb caching on DGFX for system memory - add fence timeouts - Lunar Lake graphics/media/display workarounds - Battlemage workarounds - Battlemage GSC support - GSC and HuC fw updates for LL/BM - use dma_fence_chain_free - refactor hw engine lookup and mmio access - enable priority mem read for Xe2 - Add first GuC BMG fw - fix dma-resv lock - Fix DGFX display suspend/resume - Use xe_managed for kernel BOs - Use reserved copy engine for user binds on faulting devices - Allow mixing dma-fence jobs and long-running faulting jobs - fix media TLB invalidation - fix rpm in TTM swapout path - track resources and VF state by PF i915: - Type-C programming fix for MTL+ - FBC cleanup - Calc vblank delay more accurately - On DP MST, Enable LT fallback for UHBR<->non-UHBR rates - Fix DP LTTPR detection - limit relocations to INT_MAX - fix long hangs in buddy allocator on DG2/A380 amdgpu: - Per-queue reset support - SDMA devcoredump support - DCN 4.0.1 updates - GFX12/VCN4/JPEG4 updates - Convert vbios embedded EDID to drm_edid - GFX9.3/9.4 devcoredump support - process isolation framework for GFX 9.4.3/4 - take IOMMU mappings into account for P2P DMA amdkfd: - CRIU fixes - HMM fix - Enable process isolation support for GFX 9.4.3/4 - Allow users to target recommended SDMA engines - KFD support for targetting queues on recommended SDMA engines radeon: - remove .load and drm_dev_alloc - Fix vbios embedded EDID size handling - Convert vbios embedded EDID to drm_edid - Use GEM references instead of TTM - r100 cp init cleanup - Fix potential overflows in evergreen CS offset tracking msm: - DPU: - implement DP/PHY mapping on SC8180X - Enable writeback on SM8150, SC8180X, SM6125, SM6350 - DP: - Enable widebus on all relevant chipsets - MSM8998 HDMI support - GPU: - A642L speedbin support - A615/A306/A621 support - A7xx devcoredump support ast: - astdp: Support AST2600 with VGA - Clean up HPD - Fix timeout loop for DP link training - reorganize output code by type (VGA, DP, etc) - convert to struct drm_edid - fix BMC handling for all outputs exynos: - drop stale MAINTAINERS pattern - constify struct loongson: - use GEM refcount over TTM mgag200: - Improve BMC handling - Support VBLANK intterupts - transparently support BMC outputs nouveau: - Refactor and clean up internals - Use GEM refcount over TTM's gm12u320: - convert to struct drm_edid gma500: - update i2c terms lcdif: - pixel clock fix host1x: - fix syncpoint IRQ during resume - use iommu_paging_domain_alloc() imx: - ipuv3: convert to struct drm_edid omapdrm: - improve error handling - use common helper for_each_endpoint_of_node() panel: - add support for BOE TV101WUM-LL2 plus DT bindings - novatek-nt35950: improve error handling - nv3051d: improve error handling - panel-edp: - add support for BOE NE140WUM-N6G - revert support for SDC ATNA45AF01 - visionox-vtdr6130: - improve error handling - use devm_regulator_bulk_get_const() - boe-th101mb31ig002: - Support for starry-er88577 MIPI-DSI panel plus DT - Fix porch parameter - edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2, CMN N116BCP-EA2, CSW MNB601LS1-4 - himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT - ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT - jd9365da: - Support Melfas lmfbx101117480 MIPI-DSI panel plus DT - Refactor for code sharing - panel-edp: fix name for HKC MB116AN01 - jd9365da: fix "exit sleep" commands - jdi-fhd-r63452: simplify error handling with DSI multi-style helpers - mantix-mlaf057we51: simplify error handling with DSI multi-style helpers - simple: - support Innolux G070ACE-LH3 plus DT bindings - support On Tat Industrial Company KD50G21-40NT-A1 plus DT bindings - st7701: - decouple DSI and DRM code - add SPI support - support Anbernic RG28XX plus DT bindings mediatek: - support alpha blending - remove cl in struct cmdq_pkt - ovl adaptor fix - add power domain binding for mediatek DPI controller renesas: - rz-du: add support for RZ/G2UL plus DT bindings rockchip: - Improve DP sink-capability reporting - dw_hdmi: Support 4k@60Hz - vop: - Support RGB display on Rockchip RK3066 - Support 4096px width sti: - convert to struct drm_edid stm: - Avoid UAF wih managed plane and CRTC helpers - Fix module owner - Fix error handling in probe - Depend on COMMON_CLK - ltdc: - Fix transparency after disabling plane - Remove unused interrupt tegra: - gr3d: improve PM domain handling - convert to struct drm_edid - Call drm_atomic_helper_shutdown() vc4: - fix PM during detect - replace DRM_ERROR() with drm_error() - v3d: simplify clock retrieval v3d: - Clean up perfmon virtio: - add DRM capset" * tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits) drm/xe: Fix missing conversion to xe_display_pm_runtime_resume drm/xe/xe2hpg: Add Wa_15016589081 drm/xe: Don't keep stale pointer to bo->ggtt_node drm/xe: fix missing 'xe_vm_put' drm/xe: fix build warning with CONFIG_PM=n drm/xe: Suppress missing outer rpm protection warning drm/xe: prevent potential UAF in pf_provision_vf_ggtt() drm/amd/display: Add all planes on CRTC to state for overlay cursor drm/i915/bios: fix printk format width drm/i915/display: Fix BMG CCS modifiers drm/amdgpu: get rid of bogus includes of fdtable.h drm/amdkfd: CRIU fixes drm/amdgpu: fix a race in kfd_mem_export_dmabuf() drm: new helper: drm_gem_prime_handle_to_dmabuf() drm/amdgpu/atomfirmware: Silence UBSAN warning drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare' drm/amd/amdgpu: apply command submission parser for JPEG v1 drm/amd/amdgpu: apply command submission parser for JPEG v2+ drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3 drm/amd/pm: update the features set on smu v14.0.2/3 ...

dt-bindings: Fix various typos

2024-09-13T19:01:34+00:00

Corrected several typos in Documentation/devicetree/bindings files. Reviewed-by: Krzysztof Kozlowski Reviewed-by: Kuan-Wei Chiu Reviewed-by: Matti Vaittinen Signed-off-by: Yu-Chun Lin Link: https://lore.kernel.org/r/20240905151943.2792056-1-eleanor15x@gmail.com Signed-off-by: Rob Herring (Arm)

dt-bindings: phy: mxs-usb-phy: add nxp,sim property

2024-09-03T08:11:33+00:00

i.MX7ULP need properly set System Integration Module(SIM) module to make usb wakeup work well. This will add a "nxp,sim" property. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20240903075810.1196928-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman