Linux kernel stable tree (mirror) https://git.radix-linux.su/kernel/linux.git/atom?h=v5.19 2022-06-07T16:08:02+00:00 2022-06-07T16:08:02+00:00 Rob Herring robh@kernel.org 2022-06-06T22:51:36+00:00 urn:sha1:927c63e07810fe41cc0428d767ea4b59db193b80 Another round from new cases in 5.19-rc of removing redundant minItems/maxItems when 'items' list is specified. This time it is in if/then schemas as the meta-schema was failing to check this case. If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220606225137.1536010-1-robh@kernel.org 2022-06-03T16:48:25+00:00 Rob Herring robh@kernel.org 2022-05-25T21:01:40+00:00 urn:sha1:e1dff7f133caffdba28531cddf272d0737c990bf Binding schemas which define child node properties such as memory controllers with timing properties need a separate schema which can be referenced from child device schemas. This is necessary for unevaluatedProperties checks to work properly. Move the ingenic,nemc child properties to its own file and reference from ingenic,nand.yaml which describes a child NAND controller. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220525210140.2489866-1-robh@kernel.org 2022-05-26T17:50:30+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-05-26T17:50:30+00:00 urn:sha1:16477cdfefdb494235a675cc80563d736991d833 Pull asm-generic updates from Arnd Bergmann: "The asm-generic tree contains three separate changes for linux-5.19: - The h8300 architecture is retired after it has been effectively unmaintained for a number of years. This is the last architecture we supported that has no MMU implementation, but there are still a few architectures (arm, m68k, riscv, sh and xtensa) that support CPUs with and without an MMU. - A series to add a generic ticket spinlock that can be shared by most architectures with a working cmpxchg or ll/sc type atomic, including the conversion of riscv, csky and openrisc. This series is also a prerequisite for the loongarch64 architecture port that will come as a separate pull request. - A cleanup of some exported uapi header files to ensure they can be included from user space without relying on other kernel headers" * tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: h8300: remove stale bindings and symlink sparc: add asm/stat.h to UAPI compile-test coverage powerpc: add asm/stat.h to UAPI compile-test coverage mips: add asm/stat.h to UAPI compile-test coverage riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h> agpgart.h: do not include <stdlib.h> from exported header csky: Move to generic ticket-spinlock RISC-V: Move to queued RW locks RISC-V: Move to generic spinlocks openrisc: Move to ticket-spinlock asm-generic: qrwlock: Document the spinlock fairness requirements asm-generic: qspinlock: Indicate the use of mixed-size atomics asm-generic: ticket-lock: New generic ticket-based spinlock remove the h8300 architecture 2022-05-26T17:32:47+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-05-26T17:32:47+00:00 urn:sha1:cc3c470ae4ad758b8ddad825ab199f7eaa8b0a9e Pull ARM driver updates from Arnd Bergmann: "There are minor updates to SoC specific drivers for chips by Rockchip, Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom. Noteworthy driver changes include: - Several conversions of DT bindings to yaml format. - Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs. - Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core), and support for more chips in the RPMh power domains and the soc-id. - NXP has a new driver for the HDMI blk-ctrl on i.MX8MP. - Apple M1 gains support for the on-chip NVMe controller, making it possible to finally use the internal disks. This also includes SoC drivers for their RTKit IPC and for the SART DMA address filter. For other subsystems that merge their drivers through the SoC tree, we have - Firmware drivers for the ARM firmware stack including TEE, OP-TEE, SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE now has a cache for firmware argument structures as an optimization, and SCMI now supports the 3.1 version of the specification. - Reset controller updates to Amlogic, ASpeed, Renesas and ACPI drivers - Memory controller updates for Tegra, and a few updates for other platforms" * tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits) memory: tegra: Add MC error logging on Tegra186 onward memory: tegra: Add memory controller channels support memory: tegra: Add APE memory clients for Tegra234 memory: tegra: Add Tegra234 support nvme-apple: fix sparse endianess warnings soc/tegra: pmc: Document core domain fields soc: qcom: pdr: use static for servreg_* variables soc: imx: fix semicolon.cocci warnings soc: renesas: R-Car V3U is R-Car Gen4 soc: imx: add i.MX8MP HDMI blk-ctrl soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl soc: imx: add i.MX8MP HSIO blk-ctrl soc: imx: imx8m-blk-ctrl: set power device name soc: qcom: llcc: Add sc8180x and sc8280xp configurations dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles soc/tegra: pmc: Select REGMAP dt-bindings: reset: st,sti-powerdown: Convert to yaml dt-bindings: reset: st,sti-picophyreset: Convert to yaml dt-bindings: reset: socfpga: Convert to yaml dt-bindings: reset: snps,axs10x-reset: Convert to yaml ... 2022-05-26T17:28:12+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-05-26T17:28:12+00:00 urn:sha1:ae862183285cbb2ef9032770d98ffa9becffe9d5 Pull ARM DT updates from Arnd Bergmann: "There are 40 branches this time, adding a lot of new hardware support, and cleanups. Krzysztof Kozlowski continues his treewide cleanups. There are a number of new SoCs, all of them as part of existing families, and typically added along with a reference board: - Renesas RZ/G2UL (R9A07G043) is the single-core version of the RZ/G2L general-purpose MPU. - Renesas RZ/V2M (R9A09G011) is a smart camera SoC - Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76 cores and deep learning accerlation. - Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7 and dual Wifi-6. - Corstone1000 is a generic platform from Arm that is used for designing custom SoCs, the support for now is for the Fixed Virtual Platform emulation for it. - Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in upcoming Chromebooks. - NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first MMU-less SoC to be added in a while New machines based on already supported SoCs this time are mainly for 32-bit platforms and include: - Two wireless routers based on Broadcom bcm4708 - 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly for the industrial embedded market, and on NXP LS1021A based IOT board. - Two ethernet switches based on Microchip LAN966 - Eight Qualcomm Snapdragon based machines, including a smartwatch, a Chromebook board and some phones - Another phone based on the old ST-Ericsson Ux500 platform - Seven STM32MP1 based boards - Four single-board computers based on Rockchip RK3566/RK3568" * tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits) ARM: dts: kswitch-d10: enable networking ARM: dts: lan966x: add switch node ARM: dts: lan966x: add serdes node ARM: dts: lan966x: add reset switch reset node ARM: dts: lan966x: add MIIM nodes ARM: dts: lan966x: add hwmon node ARM: dts: lan966x: add basic Kontron KSwitch D10 support ARM: dts: lan966x: add flexcom I2C nodes ARM: dts: lan966x: add flexcom SPI nodes ARM: dts: lan966x: add all flexcom usart nodes ARM: dts: lan966x: add missing uart DMA channel ARM: dts: lan966x: add sgpio node ARM: dts: lan966x: swap dma channels for crypto node ARM: dts: lan966x: rename pinctrl nodes ARM: dts: at91: sama7g5: remove interrupt-parent from gic node ARM: dts: at91: use generic node name for dataflash ARM: dts: turris-omnia: Add atsha204a node arm64: dts: mt8192: Follow binding order for SCP registers arm64: dts: mediatek: add mtk-snfi for mt7622 arm64: dts: mediatek: mt8195-demo: enable uart1 ... 2022-05-24T23:04:25+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-05-24T23:04:25+00:00 urn:sha1:09583dfed2cb9723da31601cb7080490c2e2e2d7 Pull power management updates from Rafael Wysocki: "These add support for 'artificial' Energy Models in which power numbers for different entities may be in different scales, add support for some new hardware, fix bugs and clean up code in multiple places. Specifics: - Update the Energy Model support code to allow the Energy Model to be artificial, which means that the power values may not be on a uniform scale with other devices providing power information, and update the cpufreq_cooling and devfreq_cooling thermal drivers to support artificial Energy Models (Lukasz Luba). - Make DTPM check the Energy Model type (Lukasz Luba). - Fix policy counter decrementation in cpufreq if Energy Model is in use (Pierre Gondois). - Add CPU-based scaling support to passive devfreq governor (Saravana Kannan, Chanwoo Choi). - Update the rk3399_dmc devfreq driver (Brian Norris). - Export dev_pm_ops instead of suspend() and resume() in the IIO chemical scd30 driver (Jonathan Cameron). - Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and PM-runtime counterparts (Jonathan Cameron). - Move symbol exports in the IIO chemical scd30 driver into the IIO_SCD30 namespace (Jonathan Cameron). - Avoid device PM-runtime usage count underflows (Rafael Wysocki). - Allow dynamic debug to control printing of PM messages (David Cohen). - Fix some kernel-doc comments in hibernation code (Yang Li, Haowen Bai). - Preserve ACPI-table override during hibernation (Amadeusz Sławiński). - Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson). - Make Intel RAPL power capping driver support the RaptorLake and AlderLake N processors (Zhang Rui, Sumeet Pawnikar). - Remove redundant store to value after multiply in the RAPL power capping driver (Colin Ian King). - Add AlderLake processor support to the intel_idle driver (Zhang Rui). - Fix regression leading to no genpd governor in the PSCI cpuidle driver and fix the riscv-sbi cpuidle driver to allow a genpd governor to be used (Ulf Hansson). - Fix cpufreq governor clean up code to avoid using kfree() directly to free kobject-based items (Kevin Hao). - Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy). - Make intel_pstate notify frequency invariance code when no_turbo is turned on and off (Chen Yu). - Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas Pandruvada). - Make cpufreq avoid unnecessary frequency updates due to mismatch between hardware and the frequency table (Viresh Kumar). - Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify code (Viresh Kumar). - Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the calling convention for some driver callbacks consistent (Rafael Wysocki). - Avoid accessing half-initialized cpufreq policies from the show() and store() sysfs functions (Schspa Shi). - Rearrange cpufreq_offline() to make the calling convention for some driver callbacks consistent (Schspa Shi). - Update CPPC handling in cpufreq (Pierre Gondois). - Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski). - Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf Hansson). - Improve the way genpd deals with its governors (Ulf Hansson). - Update the turbostat utility to version 2022.04.16 (Len Brown, Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)" * tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits) PM: domains: Trust domain-idle-states from DT to be correct by genpd PM: domains: Measure power-on/off latencies in genpd based on a governor PM: domains: Allocate governor data dynamically based on a genpd governor PM: domains: Clean up some code in pm_genpd_init() and genpd_remove() PM: domains: Fix initialization of genpd's next_wakeup PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd PM: domains: Measure suspend/resume latencies in genpd based on governor PM: domains: Move the next_wakeup variable into the struct gpd_timing_data PM: domains: Allocate gpd_timing_data dynamically based on governor PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain() PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd PM: domains: Drop redundant code for genpd always-on governor PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor powercap: intel_rapl: remove redundant store to value after multiply cpufreq: CPPC: Enable dvfs_possible_from_any_cpu cpufreq: CPPC: Enable fast_switch ACPI: CPPC: Assume no transition latency if no PCCT ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported ACPI: CPPC: Check _OSC for flexible address space ... 2022-05-24T00:34:20+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-05-24T00:34:20+00:00 urn:sha1:0be3ff0ccbfacb1bcc56e2ec9c1c5d92cf9a64d3 Pull EDAC updates from Borislav Petkov: - Switch ghes_edac to use the CPER error reporting routines and simplify the code considerably this way - Rip out the silly edac_align_ptr() contraption which was computing the size of the private structures of each driver and thus allowing for a one-shot memory allocation. This was clearly unnecessary and confusing so switch to simple and boring kmalloc* calls. - Last but not least, the usual garden variety of fixes, cleanups and improvements all over EDAC land * tag 'edac_updates_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/xgene: Fix typo processsors -> processors EDAC/i5100: Remove unused inline function i5100_nrecmema_dm_buf_id() EDAC: Use kcalloc() EDAC/ghes: Change ghes_hw from global to static EDAC/armada_xp: Use devm_platform_ioremap_resource() EDAC/synopsys: Add a SPDX identifier EDAC/synopsys: Add driver support for i.MX platforms EDAC/dmc520: Don't print an error for each unconfigured interrupt line EDAC/mc: Get rid of edac_align_ptr() EDAC/device: Sanitize edac_device_alloc_ctl_info() definition EDAC/device: Get rid of the silly one-shot memory allocation in edac_device_alloc_ctl_info() EDAC/pci: Get rid of the silly one-shot memory allocation in edac_pci_alloc_ctl_info() EDAC/mc: Get rid of silly one-shot struct allocation in edac_mc_alloc() efi/cper: Reformat CPER memory error location to more readable EDAC/ghes: Unify CPER memory error location reporting efi/cper: Add a cper_mem_err_status_str() to decode error description powerpc/85xx: Remove fsl,85... bindings 2022-05-18T18:55:34+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2022-05-18T18:55:34+00:00 urn:sha1:d44d6c4a3a5d79410fa2003f0b2e3e773978927f Pull devfreq changes for 5.19-rc1 from Chanwoo Choi: "1. Update devfreq core - Add cpu based scaling support to passive governor. Some device like cache might require the dynamic frequency scaling. But, it has very tightly to cpu frequency. So that use passive governor to scale the frequency according to current cpu frequency. To decide the frequency of the device, the governor does one of the following: : Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. : Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. 2. Update devfreq drivers - Update rk3399_dmc.c as following: : Convert dt-binding document to YAML and deprecate unused properties. : Use Hz units for the device-tree properties of rk3399_dmc. : rk3399_dmc is able to set the idle time before changing the dmc clock. Specify idle time parameters by using nano-second unit on dt bidning. : Add new disable-freq properties to optimize the power-saving feature of rk3399_dmc. : Disable devfreq-event device on remove() to fix unbalanced enable-disable count. : Use devm_pm_opp_of_add_table() : Block PMU (Power-Management Unit) transitions when scaling frequency by ARM Trust Firmware in order to fix the conflict between PMU and DMC (Dynamic Memory Controller)." * tag 'devfreq-next-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: PM / devfreq: passive: Keep cpufreq_policy for possible cpus PM / devfreq: passive: Reduce duplicate code when passive_devfreq case PM / devfreq: Add cpu based scaling support to passive governor PM / devfreq: Export devfreq_get_freq_range symbol within devfreq PM / devfreq: rk3399_dmc: Block PMU during transitions soc: rockchip: power-domain: Manage resource conflicts with firmware PM / devfreq: rk3399_dmc: Avoid static (reused) profile PM / devfreq: rk3399_dmc: Use devm_pm_opp_of_add_table() PM / devfreq: rk3399_dmc: Disable edev on remove() PM / devfreq: rk3399_dmc: Support new *-ns properties PM / devfreq: rk3399_dmc: Support new disable-freq properties PM / devfreq: rk3399_dmc: Use bitfield macro definitions for ODT_PD PM / devfreq: rk3399_dmc: Drop excess timing properties PM / devfreq: rk3399_dmc: Drop undocumented ondemand DT props dt-bindings: devfreq: rk3399_dmc: Add more disable-freq properties dt-bindings: devfreq: rk3399_dmc: Specify idle params in nanoseconds dt-bindings: devfreq: rk3399_dmc: Fix Hz units dt-bindings: devfreq: rk3399_dmc: Deprecate unused/redundant properties dt-bindings: devfreq: rk3399_dmc: Convert to YAML 2022-05-06T20:38:44+00:00 Arnd Bergmann arnd@arndb.de 2022-05-06T20:38:43+00:00 urn:sha1:72a21285a7804b1f4f3b7a34221ba9d86be8e5a7 dt-bindings: Changes for v5.19-rc1 Updates the memory controller bindings to properly validate the number of entries in the reg and reg-names properties. * tag 'tegra-for-5.19-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: memory: tegra: Update validation for reg and reg-names Link: https://lore.kernel.org/r/20220506143005.3916655-3-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 2022-05-05T09:59:47+00:00 Biju Das biju.das.jz@bp.renesas.com 2022-05-01T08:25:08+00:00 urn:sha1:5652dc5cd96765d236ada1006db1d467c523c3b4 Document RZ/G2UL RPC-IF bindings. RZ/G2UL RPC-IF is identical to one found on the RZ/G2L SoC. No driver changes are required as generic compatible string "renesas,rzg2l-rpc-if" will be used as a fallback. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220501082508.25511-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>