kernel/linux.git/Documentation/devicetree/bindings/interrupt-controller, branch v6.19.11

dt-bindings: Updates Linus Walleij's mail address

2025-12-16T16:17:59+00:00

My name is stamped into maintainership for a big slew of DT bindings. Now that it is changing, switch it over to my kernel.org mail address, which will hopefully be stable for the rest of my life. Signed-off-by: Linus Walleij Link: https://patch.msgid.link/20251216-maintainers-dt-v1-1-0b5ab102c9bb@kernel.org Signed-off-by: Rob Herring (Arm)

Merge tag 'soc-newsoc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-12-06T01:27:12+00:00

Pull new SoC families update from Arnd Bergmann: "These three new families of SoC are split out into a separate branch because they touch multiple parts of the source tree and are better left separate for the initial merge. - Black Sesame Technologies C1200 is an automotive SoC using Cortex-A78 CPU cores - Anlogic dr1v90 (not to be confused with Amlogic) is an FPGA platform using a single nuclei ux900 RISC-V core - Tenstorrent Blackhole is a Neural Processing Unit using custom "Tensix" cores for computation offload managed by Linux running on SiFive X280 RISC-V cores. Support for all three is rather rudimentary at the moment and will get improved as device drivers are merged through other tree" * tag 'soc-newsoc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) MAINTAINERS: add Black Sesame Technologies (BST) ARM SoC support arm64: defconfig: enable BST platform support arm64: dts: bst: add support for Black Sesame Technologies C1200 CDCU1.0 board arm64: Kconfig: add ARCH_BST for Black Sesame Technologies SoCs dt-bindings: arm: add Black Sesame Technologies (bst) SoC dt-bindings: vendor-prefixes: Add Black Sesame Technologies Co., Ltd. MAINTAINERS: Setup support for Anlogic tree riscv: defconfig: Enable Anlogic SoC riscv: dts: anlogic: Add Milianke MLKPAI FS01 board riscv: dts: Add initial Anlogic DR1V90 SoC device tree riscv: Add Anlogic SoC famly Kconfig support dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER dt-bindings: riscv: Add Anlogic DR1V90 dt-bindings: riscv: Add Nuclei UX900 compatibles dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei riscv: defconfig: Enable Tenstorrent SoCs riscv: Kconfig.socs: Add ARCH_TENSTORRENT for Tenstorrent SoCs riscv: dts: Add Tenstorrent Blackhole SoC PCIe cards dt-bindings: interrupt-controller: Add Tenstorrent Blackhole compatible ...

Merge tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2025-12-04T23:50:37+00:00

Pull devicetree updates from Rob Herring: "DT bindings: - Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma, brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions Owl SPS, Marvell AP80x System Controller, Marvell CP110 System Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema format - Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W EEPROM, and Microchip pic64gx PLIC - Add missing LGE, AMD Seattle, and APM X-Gene SoC platform compatibles - Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi bindings to fix warnings on BCM2712 platforms - Drop obsolete db8500-thermal.txt - Treewide clean-up of extra blank lines and inconsistent quoting - Ensure all .dtbo targets are applied to a base .dtb - Speed up dt_binding_check by skipping running validation on empty examples DT core: - Add of_machine_device_match() and of_machine_get_match_data() helpers and convert users treewide - Fix bounds checking of address properties in FDT code. Rework the code to have a single implementation of the bounds checks. - Rework of_irq_init() to ignore any implicit interrupt-parent (i.e. in a parent node) on nodes without an interrupt. This matches the spec description and fixes some RISC-V platforms. - Avoid a spurious message on overlay removal - Skip DT kunit tests on RISCV+ACPI" * tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: kbuild: Skip validating empty examples dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712 dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712 of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node soc: tegra: Simplify with of_machine_device_match() soc: qcom: ubwc: Simplify with of_machine_get_match_data() powercap: dtpm: Simplify with of_machine_get_match_data() platform: surface: Simplify with of_machine_get_match_data() irqchip/atmel-aic: Simplify with of_machine_get_match_data() firmware: qcom: scm: Simplify with of_machine_device_match() cpuidle: big_little: Simplify with of_machine_device_match() cpufreq: sun50i: Simplify with of_machine_device_match() cpufreq: mediatek: Simplify with of_machine_get_match_data() cpufreq: dt-platdev: Simplify with of_machine_get_match_data() of: Add wrappers to match root node with OF device ID tables dt-bindings: eeprom: at25: Add Anvo ANV32C81W of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size() of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes() of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg() ...

dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement

2025-12-01T12:46:24+00:00

Since commit 88bbe85dcd37 ("irqchip: bcm2836: Move SMP startup code to arch/arm (v2)") the bcm2836-l1-intc block on bcm2711 is only used as a base address for the smp_boot_secondary hook on 32 bit kernels. It is not used as an interrupt controller. Drop the binding requirement for interrupt-controller and interrupt-cells to satisfy validation on this platform. Signed-off-by: Dave Stevenson Acked-by: Krzysztof Kozlowski Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20241220-dt-bcm2712-fixes-v5-3-cbbf13d2e97a@raspberrypi.com Signed-off-by: Rob Herring (Arm)

dt-bindings: interrupt-controller: sifive,plic: Add pic64gx compatibility

2025-11-19T21:52:27+00:00

As mention in sifive,plic-1.0.0.yaml, a specific compatible should be used for pic64gx, so here it is. Signed-off-by: Pierre-Henry Moussay Acked-by: Conor Dooley Signed-off-by: Conor Dooley Link: https://patch.msgid.link/20251117-evict-corridor-5efe40101eea@spud Signed-off-by: Rob Herring (Arm)

dt-bindings: Remove extra blank lines

2025-11-17T17:24:50+00:00

Generally at most 1 blank line is the standard style for DT schema files. Remove the few cases with more than 1 so that the yamllint check for this can be enabled. Acked-by: Lee Jones Reviewed-by: Mathieu Poirier # remoteproc Acked-by: Georgi Djakov Acked-by: Vinod Koul Acked-by: Andi Shyti Acked-by: Bartosz Golaszewski Acked-by: Jonathan Cameron Acked-by: Philipp Zabel Acked-by: Uwe Kleine-König # for allwinner,sun4i-a10-pwm.yaml Reviewed-by: Miquel Raynal # mtd Acked-by: Guenter Roeck Acked-by: Mark Brown Acked-by: Greg Kroah-Hartman Acked-by: Sebastian Reichel Acked-by: Manivannan Sadhasivam # For PCI controller bindings Link: https://patch.msgid.link/20251023143957.2899600-1-robh@kernel.org Signed-off-by: Rob Herring (Arm)

dt-bindings: Update Krzysztof Kozlowski's email

2025-11-17T17:24:50+00:00

Update Krzysztof Kozlowski's email address to kernel.org account to stay reachable. Signed-off-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20251021095354.86455-2-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring (Arm)

dt-bindings: interrupt-controller: fsl,irqsteer: Add i.MX95 support

2025-11-17T17:24:49+00:00

Add compatible string "fsl,imx95-irqsteer" for the i.MX95 chip, which is backward compatible with "fsl,imx-irqsteer". Signed-off-by: Marek Vasut Reviewed-by: Frank Li Acked-by: Conor Dooley Link: https://patch.msgid.link/20251011170213.128907-38-marek.vasut@mailbox.org Signed-off-by: Rob Herring (Arm)

dt-bindings: interrupt-controller: Add support for Amlogic S6 S7 and S7D SoCs

2025-11-13T13:04:16+00:00

Update the device tree binding document for GPIO interrupt controller of Amlogic S6 S7 and S7D SoCs. Signed-off-by: Xianwei Zhao Signed-off-by: Thomas Gleixner Acked-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20251105-irqchip-gpio-s6-s7-s7d-v1-1-b4d1fe4781c1@amlogic.com

dt-bindings: interrupt-controller: aspeed,ast2700: Correct #interrupt-cells and interrupts count

2025-11-11T21:20:45+00:00

Update the AST2700 interrupt controller binding to match the actual hardware and the irq-aspeed-intc driver behavior. - Interrupts: First-level INTC banks request multiple interrupt lines to the root GIC, with a maximum of 10 per bank. Second-level INTC banks request only one interrupt line to their parent INTC-IC. Therefore, set the interrupts property to allow a minimum of 1 and a maximum of 10 entries. - #interrupt-cells: Set '#interrupt-cells' to <1> since the aspeed intc driver does not support specifying a trigger type; only the interrupt index is used. Signed-off-by: Ryan Chen Signed-off-by: Thomas Gleixner Acked-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20251030060155.2342604-2-ryan_chen@aspeedtech.com