kernel/linux.git/Documentation/devicetree/bindings/input/touchscreen, branch v5.19

dt-bindings: input: touchscreen: ilitek_ts_i2c: Absorb ili2xxx bindings

2022-05-19T20:54:06+00:00

While Linux uses a different driver, the Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller Device Tree binding documentation is very similar. - Drop the fixed reg value, as some controllers use a different address, - Make reset-gpios optional, as it is not always wired. Signed-off-by: Geert Uytterhoeven Reviewed-by: Rob Herring Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/0c5f06c9d262c1720b40d068b6eefe58ca406601.1638539806.git.geert+renesas@glider.be

dt-bindings: input/touchscreen: bindings for Imagis

2022-03-21T05:00:10+00:00

This patch adds device-tree bindings for the Imagis IST3038C touch screen IC. Reviewed-by: Krzysztof Kozlowski Acked-by: Rob Herring Signed-off-by: Markuss Broks Link: https://lore.kernel.org/r/20220305165330.13061-2-markuss.broks@gmail.com Signed-off-by: Dmitry Torokhov

Merge tag 'v5.16' into next

2022-01-18T02:03:39+00:00

Sync up with mainline to bring in the latest API changes.

dt-bindings: input/ts/zinitix: Convert to YAML, fix and extend

2022-01-09T07:27:03+00:00

This converts the Zinitix BT4xx and BT5xx touchscreen bindings to YAML, fix them up a bit and extends them. We list all the existing BT4xx and BT5xx components with compatible strings. These are all similar, use the same bindings and work in similar ways. We rename the supplies from the erroneous vdd/vddo to the actual supply names vcca/vdd as specified on the actual component. It is long established that supplies shall be named after the supply pin names of a component. The confusion probably stems from that in a certain product the rails to the component were named vdd/vddo. Drop some notes on how OS implementations should avoid confusion by first looking for vddo, and if that exists assume the legacy binding pair and otherwise use vcca/vdd. Add reset-gpios as sometimes manufacturers pulls a GPIO line to the reset line on the chip. Add optional touchscreen-fuzz-x and touchscreen-fuzz-y properties. Reviewed-by: Rob Herring Signed-off-by: Linus Walleij [Fixed dt_schema_check] Signed-off-by: Nikita Travkin Link: https://lore.kernel.org/r/20220106072840.36851-3-nikita@trvn.ru Signed-off-by: Dmitry Torokhov

Merge tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2021-11-08T20:07:52+00:00

Pull MFD updates from Lee Jones: "Removed Drivers: - Remove support for TI TPS80031/TPS80032 PMICs New Device Support: - Add support for Magnetic Reader to TI AM335x - Add support for DA9063_EA to Dialog DA9063 - Add support for SC2730 PMIC to Spreadtrum SC27xx - Add support for MacBookPro16,2 ICL-N UART Intel LPSS PCI - Add support for lots of new PMICS in QCom SPMI PMIC - Add support for ADC to Diolan DLN2 New Functionality: - Add support for Power Off to Rockchip RK817 Fix-ups: - Simplify Regmap passing to child devices in hi6421-spmi-pmic - SPDX licensing updates in ti_am335x_tscadc - Improve error handling in ti_am335x_tscadc - Expedite clock search in ti_am335x_tscadc - Generic simplifications in ti_am335x_tscadc - Use generic macros/defines in ti_am335x_tscadc - Remove unused code in ti_am335x_tscadc, cros_ec_dev - Convert to GPIOD in wcd934x - Add namespacing in ti_am335x_tscadc - Restrict compilation to relevant arches in intel_pmt - Provide better description/documentation in exynos_lpass - Add SPI device ID table in altera-a10sr, motorola-cpcap, sprd-sc27xx-spi - Change IRQ handling in qcom-pm8xxx - Split out I2C and SPI code in arizona - Explicitly include used headers in altera-a10sr - Convert sysfs show() function to in sysfs_emit - Standardise *_exit() and *_remove() return values in mc13xxx, stmpe, tps65912 - Trivial (style/spelling/whitespace) fixups in ti_am335x_tscadc, qcom-spmi-pmic, max77686-private - Device Tree fix-ups in ti,am3359-tscadc, samsung,s2mps11, samsung,s2mpa01, samsung,s5m8767, brcm,misc, brcm,cru, syscon, qcom,tcsr, xylon,logicvc, max77686, x-powers,ac100, x-powers,axp152, x-powers,axp209-gpio, syscon, qcom,spmi-pmic Bug Fixes: - Balance refcounting (get/put) in ti_am335x_tscadc, mfd-core - Fix IRQ trigger type in sec-irq, max77693, max14577 - Repair off-by-one in altera-sysmgr - Add explicit 'select MFD_CORE' to MFD_SIMPLE_MFD_I2C" * tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (95 commits) mfd: simple-mfd-i2c: Select MFD_CORE to fix build error mfd: tps80031: Remove driver mfd: max77686: Correct tab-based alignment of register addresses mfd: wcd934x: Replace legacy gpio interface for gpiod dt-bindings: mfd: qcom: pm8xxx: Add pm8018 compatible mfd: dln2: Add cell for initializing DLN2 ADC mfd: qcom-spmi-pmic: Add missing PMICs supported by socinfo mfd: qcom-spmi-pmic: Document ten more PMICs in the binding mfd: qcom-spmi-pmic: Sort compatibles in the driver mfd: qcom-spmi-pmic: Sort the compatibles in the binding mfd: janz-cmoio: Replace snprintf in show functions with sysfs_emit mfd: altera-a10sr: Include linux/module.h mfd: tps65912: Make tps65912_device_exit() return void mfd: stmpe: Make stmpe_remove() return void mfd: mc13xxx: Make mc13xxx_common_exit() return void dt-bindings: mfd: syscon: Add samsung,exynosautov9-sysreg compatible mfd: altera-sysmgr: Fix a mistake caused by resource_size conversion dt-bindings: gpio: Convert X-Powers AXP209 GPIO binding to a schema dt-bindings: mfd: syscon: Add rk3368 QoS register compatible mfd: arizona: Split of_match table into I2C and SPI versions ...

dt-bindings: touchscreen: ti,am3359-tsc: Remove deprecated text file

2021-10-20T16:07:28+00:00

Now that the three hardware peaces described in this file have been translated in yaml in 3 dedicated files (MFD, touchscreen controller and ADC) it is time to remove this text file. Signed-off-by: Miquel Raynal Acked-by: Jonathan Cameron Acked-by: Rob Herring Acked-by: Dmitry Torokhov Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20211015081506.933180-6-miquel.raynal@bootlin.com

dt-bindings: touchscreen: ti,am3359-tsc: New yaml description

2021-10-20T16:07:14+00:00

This touchscreen controller is already described in a text file: Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt After introducing a proper description of the MFD, this is the second step. The file cannot be removed yet as it also contains an ADC description. Signed-off-by: Miquel Raynal Reviewed-by: Rob Herring Reviewed-by: Jonathan Cameron Acked-by: Dmitry Torokhov Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20211015081506.933180-4-miquel.raynal@bootlin.com

dt-bindings: input: Convert Silead GSL1680 binding to a schema

2021-10-18T19:22:03+00:00

The Silead GSL1680 Touchscreen Controller is supported by Linux thanks to its device tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Cc: Dmitry Torokhov Cc: linux-input@vger.kernel.org Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20211015073006.8939-1-maxime@cerno.tech Signed-off-by: Rob Herring

dt-bindings: input: tsc2005: Convert to YAML schema

2021-08-30T02:15:48+00:00

Convert the TI TSC2004/TSC2005 DT bindings to YAML schema. Signed-off-by: Marek Vasut Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20210620210708.100147-1-marex@denx.de Signed-off-by: Dmitry Torokhov

dt-bindings: input: Convert Pixcir Touchscreen binding to a schema

2021-07-24T00:37:17+00:00

The Pixcir Touchscreen Controller is supported by Linux thanks to its device tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Signed-off-by: Maxime Ripard Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20210721140424.725744-18-maxime@cerno.tech Signed-off-by: Dmitry Torokhov