kernel/linux.git/Documentation/devicetree/bindings/connector, branch v5.16

dt-bindings: connector: Add pd-disable property

2021-08-13T11:05:51+00:00

Set "pd-disable" property if the Type-C connector has no power delivery support. Reviewed-by: Rob Herring Signed-off-by: Kyle Tso Link: https://lore.kernel.org/r/20210804081917.3390341-2-kyletso@google.com Signed-off-by: Greg Kroah-Hartman

dt-bindings: connector: Add PD rev 2.0 VDO definition

2021-06-04T09:43:01+00:00

Add the VDO definition for USB PD rev 2.0 in the bindings and define a new property snk-vdos-v1 containing legacy VDOs as the responses to the port partner which only supports PD rev 2.0. Reviewed-by: Rob Herring Signed-off-by: Kyle Tso Link: https://lore.kernel.org/r/20210601123151.3441914-3-kyletso@google.com Signed-off-by: Greg Kroah-Hartman

dt-bindings: connector: Add slow-charger-loop definition

2021-04-22T08:56:51+00:00

Allows PMIC charger loops which are slow(i.e. cannot meet the 15ms deadline) to still comply to pSnkStby i.e Maximum power that can be consumed by sink while in Sink Standby state as defined in 7.4.2 Sink Electrical Parameters of USB Power Delivery Specification Revision 3.0, Version 1.2. This patch introduces slow-charger-loop which when set makes the port request PD_P_SNK_STDBY_MW(2.5W i.e 500mA@5V) upon entering SNK_DISCOVERY (instead of 3A or the 1.5A during SNK_DISCOVERY) and the actual currrent limit after RX of PD_CTRL_PSRDY for PD link or during SNK_READY for non-pd link. Acked-by: Rob Herring Signed-off-by: Badhri Jagan Sridharan Link: https://lore.kernel.org/r/20210414142656.63749-3-badhri@google.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2021-02-22T18:05:12+00:00

Pull devicetree updates from Rob Herring: - Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host fdtoverlay - Add kbuild support to build DT overlays (%.dtbo) - Drop NULLifying match table in of_match_device(). In preparation for this, there are several driver cleanups to use (of_)?device_get_match_data(). - Drop pointless wrappers from DT struct device API - Convert USB binding schemas to use graph schema and remove old plain text graph binding doc - Convert spi-nor and v3d GPU bindings to DT schema - Tree wide schema fixes for if/then schemas, array size constraints, and undocumented compatible strings in examples - Handle 'no-map' correctly for already reserved memblock regions * tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits) driver core: platform: Drop of_device_node_put() wrapper of: Remove of_dev_{get,put}() dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt dt-bindings: can: rcar_canfd: Group tuples in pin control properties dt-bindings: power: renesas,apmu: Group tuples in cpus properties dt-bindings: mtd: spi-nor: Convert to DT schema format dt-bindings: Use portable sort for version cmp dt-bindings: ethernet-controller: fix fixed-link specification dt-bindings: irqchip: Add node name to PRUSS INTC dt-bindings: interconnect: Fix the expected number of cells dt-bindings: Fix errors in 'if' schemas dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required dt-bindings: Fix undocumented compatible strings in examples kbuild: Add support to build overlays (%.dtbo) scripts: dtc: Remove the unused fdtdump.c file scripts: dtc: Build fdtoverlay tool scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9 scripts: dtc: Fetch fdtoverlay.c from external DTC project dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings dt-bindings: iio: dac: Fix AD5686 references ...

Documentation: connector: Update the description of sink-vdos

2021-02-12T15:36:56+00:00

Remove the acronym "VDM" and replace it with the full name "Vendor Defined Message". Reviewed-by: Guenter Roeck Signed-off-by: Kyle Tso Link: https://lore.kernel.org/r/20210212073743.665038-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman

dt-bindings: connector: Add SVDM VDO properties

2021-02-09T10:48:55+00:00

Add bindings of VDO properties of USB PD SVDM so that they can be used in device tree. Reviewed-by: Rob Herring Acked-by: Heikki Krogerus Signed-off-by: Kyle Tso Link: https://lore.kernel.org/r/20210205033415.3320439-7-kyletso@google.com Signed-off-by: Greg Kroah-Hartman

dt-bindings: usb-connector: Use OF graph schema

2021-01-12T15:47:04+00:00

Now that we have a graph schema, reference it from the usb-connector schema. Reviewed-by: Laurent Pinchart Link: https://lore.kernel.org/r/20201102203656.220187-3-robh@kernel.org Signed-off-by: Rob Herring

dt-bindings: Fix JSON pointers

2020-12-18T21:14:44+00:00

The correct syntax for JSON pointers begins with a '/' after the '#'. Without a '/', the string should be interpreted as a subschema identifier. The jsonschema module currently doesn't handle subschema identifiers and incorrectly allows JSON pointers to begin without a '/'. Let's fix this before it becomes a problem when jsonschema module is fixed. Converted with: perl -p -i -e 's/yaml#definitions/yaml#\/definitions/g' `find Documentation/devicetree/bindings/ -name "*.yaml"` Cc: Maxime Ripard Cc: Jonathan Cameron Cc: Lars-Peter Clausen Cc: Daniel Thompson Cc: Jingoo Han Cc: Pavel Machek Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Andrew Lunn Cc: Florian Fainelli Cc: Greg Kroah-Hartman Cc: Mark Brown Cc: netdev@vger.kernel.org Acked-By: Vinod Koul Acked-by: Lee Jones Acked-by: Guenter Roeck Acked-by: Sebastian Reichel Acked-by: Florian Fainelli Acked-by: Mark Brown Acked-by: Jakub Kicinski Link: https://lore.kernel.org/r/20201217223429.354283-1-robh@kernel.org Signed-off-by: Rob Herring

Merge tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-12-17T00:27:35+00:00

Pull ARM device tree updates from Arnd Bergmann: "Across all platforms, there is a continued move towards DT schema for validating the dts files. As a result there are bug fixes for mistakes that are found using these schema, in addition to warnings from the dtc compiler. As usual, many changes are for adding support for additional on-chip and on-board components in the machines we already support. The newly supported SoCs for this release are: - MStar Infinity2M, a low-end IP camera chip based on a dual-core Cortex-A7, otherwise similar to the Infinity chip we already support. This is also known as the SigmaStar SSD202D, and we add support for the Honestar ssd201htv2 development kit. - Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller (BMC), in the same family as the NPCM750. This gets used in the Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of which are added as well. - Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own Brahma-B53 CPU. Support is also added for the Asus ROG Rapture GT-AC5300 high-end WiFi router based on this chip. - Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores, meant for faster Chromebooks and tablets. It gets added along with its reference design. - Mediatek MT6779 (Helio P90) is a high-end phone chip from last year's generation, also added along with its reference board. This one is still based on Cortex-A75/A55. - Mediatek MT8167 is a version of the already supported MT8516 chip, both based on Cortex-A35. It gets added along with the "Pumpkin" single board computer, but is likely to also make its way into low-end tablets in the future. For the already supported chips, there are a number of new boards. Interestingly there are more 32-bit machines added this time than 64-bit. Here is a brief list of the new boards: - Three new Mikrotik router variants based on Marvell Prestera 98DX3236, a close relative of the more common Armada XP - A reference board for the Marvell Armada 382 - Three new servers using ASpeed baseboard management controllers, the actual machines being from Bytedance, Facebook and IBM, and one machine using the Nuvoton NPCM750 BMC. - The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412. - The usual set of 32-bit i.MX industrial/embedded hardware: * Protonic WD3 (tractor e-cockpit) * Kamstrup OMNIA Flex Concentrator (smart grid platform) * Van der Laan LANMCU (food storage) * Altesco I6P (vehicle inspection stations) * PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard - DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the aleady supported DHCOM module - Three new Allwinner SoC based single-board computers: * NanoPi R1 (H3 based) * FriendlyArm ZeroPi (H3 based) * Elimo Initium SBC (S3 based) - Ouya Game Console based on Nvidia Tegra 3 - Version 5 of the already supported Zynq Z-Turn MYIR Board - LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which is a repackaged 16-core LX2160A - A series of Kontron i.MX8M Mini baseboard/SoM versions - Espressobin Ultra, a new variant of the popular Armada 3700 based board, - IEI Puzzle-M801, a rackmount network appliance based on Marvell Armada 8040 - Microsoft Lumia 950 XL, a phone - HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and sm8150, respectively - Three new board variants of the "Trogdor" Chromebook (sc7180) - New board variants of the Renesas based "Kingfisher" and "HiHope" reference boards - Kobol Helios64, an open source NAS appliance based on Rockchips RK3399 - Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few carrier boards" * tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits) arm64: dts: sparx5: Add SGPIO devices arm64: dts: sparx5: Add reset support dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver ARM: mstar: SMP support ARM: mstar: Wire up smpctrl for SSD201/SSD202D ARM: mstar: Add smp ctrl registers to infinity2m dtsi ARM: mstar: Add dts for Honestar ssd201htv2 ARM: mstar: Add chip level dtsi for SSD202D ARM: mstar: Add common dtsi for SSD201/SSD202D ARM: mstar: Add infinity2m support dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards dt-bindings: vendor-prefixes: Add honestar vendor prefix dt-bindings: mstar: Add binding details for mstar,smpctrl ARM: mstar: Fill in GPIO controller properties for infinity ARM: mstar: Add gpio controller to MStar base dtsi ARM: zynq: Fix incorrect reference to XM013 instead of XM011 ARM: zynq: Convert at25 binding to new description on zc770-xm013 ARM: zynq: Fix OCM mapping to be aligned with binding on zc702 ARM: zynq: Fix leds subnode name for zc702/zybo-z7 ARM: zynq: Rename bus to be align with simple-bus yaml ...

dt-bindings: connector: add typec-power-opmode property to usb-connector

2020-11-26T13:42:41+00:00

Power operation mode may depends on hardware design, so, add the optional property typec-power-opmode for usb-c connector to select the power operation mode capability. Signed-off-by: Amelie Delaunay Reviewed-by: Rob Herring Signed-off-by: Alexandre Torgue