kernel/linux.git/Documentation/devicetree/bindings/clock, branch v6.6.132

dt-bindings: clock: axi-clkgen: include AXI clk

2024-12-09T09:32:22+00:00

[ Upstream commit 47f3f5a82a31527e027929c5cec3dd1ef5ef30f5 ] In order to access the registers of the HW, we need to make sure that the AXI bus clock is enabled. Hence let's increase the number of clocks by one and add clock-names to differentiate between parent clocks and the bus clock. Fixes: 0e646c52cf0e ("clk: Add axi-clkgen driver") Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20241029-axi-clkgen-fix-axiclk-v2-1-bc5e0733ad76@analog.com Reviewed-by: Conor Dooley Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

dt-bindings: clock: versaclock3: Add description for #clock-cells property

2023-09-11T20:23:52+00:00

Add description for "#clock-cells" property to map indexes to the clock output in the Table 3. ("Output Source") in the 5P35023 datasheet (ie: {REF,SE1,SE2,SE3,DIFF1,DIFF2}. Also update the "assigned-clock-rates" in the example. While at it, replace clocks phandle in the example from x1_x2->x1 as X2 is a different 32768 kHz crystal. Suggested-by: Geert Uytterhoeven Signed-off-by: Biju Das Acked-by: Conor Dooley Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20230824104812.147775-2-biju.das.jz@bp.renesas.com Reviewed-by: Geert Uytterhoeven Signed-off-by: Stephen Boyd

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2023-08-31T02:53:39+00:00

Pull clk subsystem updates from Stephen Boyd: "This pull request is full of clk driver changes. In fact, there aren't any changes to the clk framework this time around. That's probably because everyone was on vacation (yours truly included). We did lose a couple clk drivers this time around because nobody was using those devices. That skews the diffstat a bit, but either way, nothing looks out of the ordinary here. The usual suspects are chugging along adding support for more SoCs and fixing bugs. If I had to choose, I'd say the theme for the past few months has been "polish". There's quite a few patches that migrate to devm_platform_ioremap_resource() in here. And there's more than a handful of patches that move the NR_CLKS define from the DT binding header to the driver. There's even patches that migrate drivers to use clk_parent_data and clk_hw to describe clk tree topology. It seems that the spring (summer?) cleaning bug got some folks, or the semiconductor shortage finally hit the software side. New Drivers: - StarFive JH7110 SoC clock drivers - Qualcomm IPQ5018 Global Clock Controller driver - Versa3 clk generator to support 48KHz playback/record with audio codec on RZ/G2L SMARC EVK Removed Drivers: - Remove non-OF mmp clk drivers - Remove OXNAS clk driver Updates: - Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc - Move defines for numbers of clks (NR_CLKS) from DT headers to drivers - Introduce kstrdup_and_replace() and use it - Add PLL rates for Rockchip rk3568 - Add the display clock tree for Rockchip rv1126 - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs - Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource() - Fix function name in a comment in ccu_mmc_timing.c - Parameter name correction for ccu_nkm_round_rate() - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative parent rates when determining clock rates - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi - Support finding closest (as opposed to closest but not higher) clock rate for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0 - Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to the interconnect drivers - Fix various PM runtime bugs across many Qualcomm clk drivers - Migrate Qualcomm MDM9615 is to parent_hw and parent_data - Add network related resets on Qualcomm IPQ4019 - Add a couple missing USB related clocks to Qualcomm IPQ9574 - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are corrected - Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver - Support retention for the Qualcomm SC8280XP display clock controller GDSCs. - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250, while sm8450 is corrected to use floor ops - Correct Qualcomm SM6350 GPU clock controller's clock supplies - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC - Change the delay in the Qualcomm reset controller to fsleep() for correctness - Extend the Qualcomm SM83550 Video clock controller to support SC8280XP - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3, M3-W, and M3-N SoCs - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five - Add the PDM IPC clock for i.MX93 - Add 519.75MHz frequency support for i.MX9 PLL - Simplify the .determine_rate() implementation for i.MX GPR mux - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource() - Add the audio mux clock to i.MX8 - Fix the SPLL2 MULT range for PLLv4 - Update the SPLL2 type in i.MX8ULP - Fix the SAI4 clock on i.MX8MP - Add silicon revision print for i.MX25 on clocks init - Drop the return value from __mx25_clocks_init() - Fix the clock pauses on no-op set_rate for i.MX8M composite clock - Drop restrictions for i.MX PLL14xx and fix its max prediv value - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow glitch free switching" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits) clk: qcom: Fix SM_GPUCC_8450 dependencies clk: lmk04832: Support using PLL1_LD as SPI readback pin clk: lmk04832: Don't disable vco clock on probe fail clk: lmk04832: Set missing parent_names for output clocks clk: mvebu: Convert to devm_platform_ioremap_resource() clk: nuvoton: Convert to devm_platform_ioremap_resource() clk: socfpga: agilex: Convert to devm_platform_ioremap_resource() clk: ti: Use devm_platform_get_and_ioremap_resource() clk: mediatek: Convert to devm_platform_ioremap_resource() clk: hsdk-pll: Convert to devm_platform_ioremap_resource() clk: gemini: Convert to devm_platform_ioremap_resource() clk: fsl-sai: Convert to devm_platform_ioremap_resource() clk: bm1880: Convert to devm_platform_ioremap_resource() clk: axm5516: Convert to devm_platform_ioremap_resource() clk: actions: Convert to devm_platform_ioremap_resource() clk: cdce925: Remove redundant of_match_ptr() clk: pxa910: Move number of clocks to driver source clk: pxa1928: Move number of clocks to driver source clk: pxa168: Move number of clocks to driver source clk: mmp2: Move number of clocks to driver source ...

Merge tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2023-08-30T23:59:03+00:00

Pull devicetree updates from Rob Herring: "DT core: - Add support for generating DT nodes for PCI devices. This is the groundwork for applying overlays to PCI devices containing non-discoverable downstream devices. - DT unittest additions to check reverted changesets, to test for refcount issues, and to test unresolved symbols. Also, various clean-ups of the unittest along the way. - Refactor node and property manipulation functions to better share code with old API and changeset API - Refactor changeset print functions to a common implementation - Move some platform_device specific functions into of_platform.c Bindings: - Treewide fixing of typos - Treewide clean-up of SPDX tags to use 'OR' consistently - Last chunk of dropping unnecessary quotes. With that, the check for unnecessary quotes is enabled in yamllint. - Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi bindings to DT schema format - Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450 Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings - Fixes for Rockchip DWC PCI binding - Ensure all properties are evaluated on USB connector schema - Fix dt-check-compatible script to find of_device_id instances with compiler annotations" * tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits) dt-bindings: usb: Add V3s compatible string for OHCI dt-bindings: usb: Add V3s compatible string for EHCI dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B dt-bindings: vendor-prefixes: document Saef Technology dt-bindings: thermal: lmh: update maintainer address of: unittest: Fix of_unittest_pci_node() kconfig dependencies dt-bindings: crypto: ice: Document sm8450 inline crypto engine dt-bindings: ufs: qcom: Add ICE to sm8450 example dt-bindings: ufs: qcom: Add sm6115 binding dt-bindings: ufs: qcom: Add reg-names property for ICE dt-bindings: yamllint: Enable quoted string check dt-bindings: Drop remaining unneeded quotes of: unittest-data: Fix whitespace - angular brackets of: unittest-data: Fix whitespace - indentation of: unittest-data: Fix whitespace - blank lines of: unittest-data: Convert remaining overlay DTS files to sugar syntax of: overlay: unittest: Add test for unresolved symbol of: unittest: Add separators to of_unittest_overlay_high_level() of: unittest: Cleanup partially-applied overlays of: unittest: Merge of_unittest_apply{,_revert}_overlay_check() ...

Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2023-08-30T23:53:46+00:00

Pull ARM devicetree updates from Arnd Bergmann: "These are the devicetree updates for Arm and RISC-V based SoCs, mainly from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and Starfive. Only a few new SoC got added: - TI AM62P5, a variant of the existing Sitara AM62x family - Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55 SoC. - Qualcomm ipq5018 is used in wireless access points - Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone platform. In total, 29 machines get added, which is low because of the summer break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST, Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of these are development and reference boards. Despite not adding a lot of new machines, there are over 700 patches in total, most of which are cleanups and minor fixes" * tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits) arm64: dts: use capital "OR" for multiple licenses in SPDX ARM: dts: use capital "OR" for multiple licenses in SPDX arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved ARM: dts: qcom: apq8064: add support to gsbi4 uart riscv: dts: change TH1520 files to dual license riscv: dts: thead: add BeagleV Ahead board device tree dt-bindings: riscv: Add BeagleV Ahead board compatibles ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs ARM: dts: stm32: support display on stm32f746-disco board ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco ARM: dts: stm32: add pin map for LTDC on stm32f7 ARM: dts: stm32: add ltdc support on stm32f746 MCU arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Add PDC riscv: dts: starfive: fix jh7110 qspi sort order ...

Merge tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2023-08-30T23:42:21+00:00

Pull ARM SoC driver updates from Arnd Bergmann: "The main change this time was the introduction of the drivers/genpd subsystem that gets split out from drivers/soc to keep common functionality together. The SCMI driver subsystem gets an update to version 3.2 of the specification. There are also updates to memory, reset and other firmware drivers. On the soc driver side, the updates are mostly cleanups across a number of Arm platforms. On driver for loongarch adds power management for DT based systems, another driver is for HiSilicon's Arm server chips with their HCCS system health interface. The remaining updates for the most part add support for additional hardware in existing drivers or contain minor cleanups. Most of these are for the Qualcomm Snapdragon platform" * tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits) bus: fsl-mc: Use common ranges functions soc: kunpeng_hccs: fix some sparse warnings about incorrect type soc: loongson2_pm: add power management support soc: dt-bindings: add loongson-2 pm soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1 genpd: rockchip: Add PD_VO entry for rv1126 bus: ti-sysc: Fix cast to enum warning soc: kunpeng_hccs: add MAILBOX dependency MAINTAINERS: remove OXNAS entry dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated irqchip: irq-versatile-fpga: remove obsolete oxnas compatible soc: qcom: aoss: Tidy up qmp_send() callers soc: qcom: aoss: Format string in qmp_send() soc: qcom: aoss: Move length requirements from caller soc: kunpeng_hccs: fix size_t format string soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX dt-bindings: firmware: qcom: scm: Updating VMID list firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP firmware: imx: scu-irq: add imx_scu_irq_get_status ...

Merge branch 'clk-qcom' into clk-next

2023-08-30T21:39:58+00:00

* clk-qcom: (87 commits) clk: qcom: Fix SM_GPUCC_8450 dependencies clk: qcom: smd-rpm: Set XO rate and CLK_IS_CRITICAL on PCNoC clk: qcom: smd-rpm: Add a way to define bus clocks with rate and flags clk: qcom: gcc-ipq5018: change some variable static clk: qcom: gcc-ipq4019: add missing networking resets dt-bindings: clock: qcom: ipq4019: add missing networking resets clk: qcom: gcc-msm8917: Enable GPLL0_SLEEP_CLK_SRC dt-bindings: clock: gcc-msm8917: Add definition for GPLL0_SLEEP_CLK_SRC clk: qcom: gcc-qdu1000: Update the RCGs ops clk: qcom: gcc-qdu1000: Update the SDCC clock RCG ops clk: qcom: gcc-qdu1000: Add support for GDSCs clk: qcom: gcc-qdu1000: Add gcc_ddrss_ecpri_gsi_clk support clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clock clk: qcom: gcc-qdu1000: Fix clkref clocks handling clk: qcom: gcc-qdu1000: Fix gcc_pcie_0_pipe_clk_src clock handling dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs clk: qcom: ipq5332: drop the gcc_apss_axi_clk_src clock clk: qcom: ipq5332: drop the mem noc clocks clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks ...

Merge branches 'clk-imx', 'clk-samsung', 'clk-annotate', 'clk-marvell' and 'clk-lmk' into clk-next

2023-08-30T21:39:19+00:00

- Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc - Remove non-OF mmp clk drivers - Move number of clks from DT headers to drivers * clk-imx: clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz clk: imx: pll14xx: align pdiv with reference manual clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op clk: imx25: make __mx25_clocks_init return void clk: imx25: print silicon revision during init dt-bindings: clocks: imx8mp: make sai4 a dummy clock clk: imx8mp: fix sai4 clock clk: imx: imx8ulp: update SPLL2 type clk: imx: pllv4: Fix SPLL2 MULT range clk: imx: imx8: add audio clock mux driver dt-bindings: clock: fsl,imx8-acm: Add audio clock mux support clk: imx: clk-imx8qxp-lpcg: Convert to devm_platform_ioremap_resource() clk: imx: clk-gpr-mux: Simplify .determine_rate() clk: imx: Add 519.75MHz frequency support for imx9 pll clk: imx93: Add PDM IPG clk dt-bindings: clock: imx93: Add PDM IPG clk * clk-samsung: dt-bindings: clock: samsung: remove define with number of clocks clk: samsung: exynoautov9: do not define number of clocks in bindings clk: samsung: exynos850: do not define number of clocks in bindings clk: samsung: exynos7885: do not define number of clocks in bindings clk: samsung: exynos5433: do not define number of clocks in bindings clk: samsung: exynos5420: do not define number of clocks in bindings clk: samsung: exynos5410: do not define number of clocks in bindings clk: samsung: exynos5260: do not define number of clocks in bindings clk: samsung: exynos5250: do not define number of clocks in bindings clk: samsung: exynos4: do not define number of clocks in bindings clk: samsung: exynos3250: do not define number of clocks in bindings * clk-annotate: clk: qcom: clk-spmi-pmic-div: Annotate struct spmi_pmic_div_clk_cc with __counted_by clk: Annotate struct clk_hw_onecell_data with __counted_by * clk-marvell: clk: pxa910: Move number of clocks to driver source clk: pxa1928: Move number of clocks to driver source clk: pxa168: Move number of clocks to driver source clk: mmp2: Move number of clocks to driver source clk: mmp: Remove old non-OF clock drivers * clk-lmk: clk: lmk04832: Support using PLL1_LD as SPI readback pin clk: lmk04832: Don't disable vco clock on probe fail clk: lmk04832: Set missing parent_names for output clocks

Merge branches 'clk-versa', 'clk-strdup', 'clk-amlogic', 'clk-allwinner' and 'clk-rockchip' into clk-next

2023-08-30T21:38:19+00:00

- Add Versa3 clk generator to support 48KHz playback/record with audio codec on RZ/G2L SMARC EVK - Introduce kstrdup_and_replace() and use it * clk-versa: clk: vc7: Use i2c_get_match_data() instead of device_get_match_data() clk: vc5: Use i2c_get_match_data() instead of device_get_match_data() clk: versaclock3: Switch to use i2c_driver's probe callback clk: Add support for versa3 clock driver dt-bindings: clock: Add Renesas versa3 clock generator bindings * clk-strdup: clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace() clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace() driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace() lib/string_helpers: Add kstrdup_and_replace() helper * clk-amlogic: (22 commits) dt-bindings: soc: amlogic: document System Control registers dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema clk: meson: axg-audio: move bindings include to main driver clk: meson: meson8b: move bindings include to main driver clk: meson: a1: move bindings include to main driver clk: meson: eeclk: move bindings include to main driver clk: meson: aoclk: move bindings include to main driver dt-bindings: clk: axg-audio-clkc: expose all clock ids dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids dt-bindings: clk: meson8b-clkc: expose all clock ids dt-bindings: clk: g12a-aoclkc: expose all clock ids dt-bindings: clk: g12a-clks: expose all clock ids dt-bindings: clk: axg-clkc: expose all clock ids dt-bindings: clk: gxbb-clkc: expose all clock ids clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS ... * clk-allwinner: clk: sunxi-ng: nkm: Prefer current parent rate clk: sunxi-ng: a64: select closest rate for pll-video0 clk: sunxi-ng: div: Support finding closest rate clk: sunxi-ng: mux: Support finding closest rate clk: sunxi-ng: nkm: Support finding closest rate clk: sunxi-ng: nm: Support finding closest rate clk: sunxi-ng: Add helper function to find closest rate clk: sunxi-ng: Add feature to find closest rate clk: sunxi-ng: a64: allow pll-mipi to set parent's rate clk: sunxi-ng: nkm: consider alternative parent rates when determining rate clk: sunxi-ng: nkm: Use correct parameter name for parent HW clk: sunxi-ng: Modify mismatched function name clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource() * clk-rockchip: clk: rockchip: rv1126: Add PD_VO clock tree clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz clk: rockchip: rk3568: Add PLL rate for 101MHz

Merge branches 'clk-bindings', 'clk-starfive', 'clk-rm', 'clk-renesas' and 'clk-cleanup' into clk-next

2023-08-30T21:37:45+00:00

- Remove OXNAS clk driver * clk-bindings: dt-bindings: clock: versal: Convert the xlnx,zynqmp-clk.txt to yaml dt-bindings: clock: xlnx,versal-clk: drop select:false dt-bindings: clock: versal: Add versal-net compatible string dt-bindings: clock: ast2600: Add I3C and MAC reset definitions dt-bindings: arm: hisilicon,cpuctrl: Merge "hisilicon,hix5hd2-clock" into parent binding * clk-starfive: reset: starfive: jh7110: Add StarFive STG/ISP/VOUT resets support clk: starfive: Simplify .determine_rate() clk: starfive: Add StarFive JH7110 Video-Output clock driver clk: starfive: Add StarFive JH7110 Image-Signal-Process clock driver clk: starfive: Add StarFive JH7110 System-Top-Group clock driver clk: starfive: jh7110-sys: Add PLL clocks source from DTS clk: starfive: Add StarFive JH7110 PLL clock driver dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator dt-bindings: clock: Add StarFive JH7110 Image-Signal-Process clock and reset generator dt-bindings: clock: Add StarFive JH7110 System-Top-Group clock and reset generator dt-bindings: clock: jh7110-syscrg: Add PLL clock inputs dt-bindings: soc: starfive: Add StarFive syscon module dt-bindings: clock: Add StarFive JH7110 PLL clock generator * clk-rm: dt-bindings: clk: oxnas: remove obsolete bindings clk: oxnas: remove obsolete clock driver * clk-renesas: clk: renesas: rcar-gen3: Add ADG clocks clk: renesas: r8a77965: Add 3DGE and ZG support clk: renesas: r8a7796: Add 3DGE and ZG support clk: renesas: r8a7795: Add 3DGE and ZG support clk: renesas: emev2: Remove obsolete clkdev registration clk: renesas: r9a07g043: Add MTU3a clock and reset entry clk: renesas: rzg2l: Simplify .determine_rate() clk: renesas: r9a09g011: Add CSI related clocks clk: renesas: r8a774b1: Add 3DGE and ZG support clk: renesas: r8a774e1: Add 3DGE and ZG support clk: renesas: r8a774a1: Add 3DGE and ZG support clk: renesas: rcar-gen3: Add support for ZG clock * clk-cleanup: clk: mvebu: Convert to devm_platform_ioremap_resource() clk: nuvoton: Convert to devm_platform_ioremap_resource() clk: socfpga: agilex: Convert to devm_platform_ioremap_resource() clk: ti: Use devm_platform_get_and_ioremap_resource() clk: mediatek: Convert to devm_platform_ioremap_resource() clk: hsdk-pll: Convert to devm_platform_ioremap_resource() clk: gemini: Convert to devm_platform_ioremap_resource() clk: fsl-sai: Convert to devm_platform_ioremap_resource() clk: bm1880: Convert to devm_platform_ioremap_resource() clk: axm5516: Convert to devm_platform_ioremap_resource() clk: actions: Convert to devm_platform_ioremap_resource() clk: cdce925: Remove redundant of_match_ptr() drivers: clk: keystone: Fix parameter judgment in _of_pll_clk_init() clk: Explicitly include correct DT includes