kernel/linux.git/Documentation/devicetree/bindings/ata, branch v6.6.131

dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes

2023-09-25T06:51:16+00:00

The PATA child node schema is missing constraints to prevent unknown properties. As none of the users of this common binding extend the child nodes with additional properties, adding "additionalProperties: false" here is sufficient. Signed-off-by: Rob Herring Acked-by: Conor Dooley Signed-off-by: Damien Le Moal

dt-bindings: Fix typos

2023-08-18T16:32:25+00:00

Fix typos in Documentation/devicetree/bindings. The changes are in descriptions or comments where they shouldn't affect functionality. Signed-off-by: Bjorn Helgaas Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org Signed-off-by: Rob Herring

Merge tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

2023-06-30T18:48:16+00:00

Pull ata updates from Damien Le Moal: - Add support for the .remove_new callback to the ata_platform code to simplify device removal interface (Uwe) - Code simplification in ata_dev_revalidate() (Yahu) - Fix code indentation and coding style in the pata_parport protocol modules to avoid warnings from static code analyzers (me) - Clarify ata_eh_qc_retry() behavior with better comments (Niklas) - Simplify and improve ata_change_queue_depth() behavior to have a consistent behavior between libsas managed devices and libata managed devices (e.g. AHCI connected devices) (me) - Cleanup libata-scsi and libata-eh code to use the ata_ncq_enabled() and ata_ncq_supported() helpers instead of open coding flags tests (me) - Cleanup ahci_reset_controller() code (me) - Change the pata_octeon_cf and sata_svw drivers to use of_property_read_reg() to simplify the code (Rob, me) - Remove unnecessary include files from ahci_octeon driver (me) - Modify the DesignWare ahci dt bindings to add support for the Rockchip RK3588 AHCI (Sebastian) * tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (29 commits) dt-bindings: phy: rockchip: rk3588 has two reset lines dt-bindings: ata: dwc-ahci: add Rockchip RK3588 dt-bindings: ata: dwc-ahci: add PHY clocks ata: ahci_octeon: Remove unnecessary include ata: pata_octeon_cf: Add missing header include ata: ahci: Cleanup ahci_reset_controller() ata: Use of_property_read_reg() to parse "reg" ata: libata-scsi: Use ata_ncq_supported in ata_scsi_dev_config() ata: libata-eh: Use ata_ncq_enabled() in ata_eh_speed_down() ata: libata-sata: Improve ata_change_queue_depth() ata: libata-sata: Simplify ata_change_queue_depth() ata: libata-eh: Clarify ata_eh_qc_retry() behavior at call site ata: pata_parport: Fix on26 module code indentation and style ata: pata_parport: Fix on20 module code indentation and style ata: pata_parport: Fix ktti module code indentation and style ata: pata_parport: Fix kbic module code indentation and style ata: pata_parport: Fix friq module code indentation and style ata: pata_parport: Fix fit3 module code indentation and style ata: pata_parport: Fix fit2 module code indentation and style ata: pata_parport: Fix epia module code indentation and style ...

Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2023-06-29T22:07:06+00:00

Pull ARM SoC devicetree updates from Arnd Bergmann: "The biggest change this time is for the 32-bit devicetree files, which are all moved to a new location, using separate subdirectories for each SoC vendor, following the same scheme that is used on arm64, mips and riscv. This has been discussed for many years, but so far we never did this as there was a plan to move the files out of the kernel entirely, which has never happened. The impact of this will be that all external patches no longer apply, and anything depending on the location of the dtb files in the build directory will have to change. The installed files after 'make dtbs_install' keep the current location. There are six added SoCs here that are largely variants of previously added chips. Two other chips are added in a separate branch along with their device drivers. - The Samsung Exynos 4212 makes its return after the Samsung Galaxy Express phone is addded at last. The SoC support was originally added in 2012 but removed again in 2017 as it was unused at the time. - Amlogic C3 is a Cortex-A35 based smart IP camera chip - Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of the still common MSM8916 (Snapdragon 410) phone chip that has been supported for a long time. - Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end laptop chips, used in the Lenovo Flex 5G, which is added along with the reference board. - Qualcomm SDX75 is the latest generation modem chip that is used as a peripherial in phones but can also run a standalone Linux. Unlike the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55. - Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie C910 core, a step up from all previously added rv64 chips. All of the above come with reference board implementations, those included there are 39 new board files, but only five more 32-bit this time, probably a new low: - Marantec Maveo board based on dhcor imx6ull module - Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip - Epson Moverio BT-200 AR glasses based on TI OMAP4 - PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM - ICnova ADB4006 board based on Allwinner A20 On the 64-bit side, there are also fewer addded machines than we had in the recent releases: - Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device. - NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234 - Qualcomm gains support for 6 reference boards on various members of their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top of the various reference platforms for their new chips. - Rockchips support for several newer boards: Indiedroid Nova (rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S (rk3568) - TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin family with AM62 COM, carrier and dev boards Other changes to existing boards contain the usual minor improvements along with - continued updates to clean up dts files based on dtc warnings and binding checks, in particular cache properties and node names - support for devicetree overlays on at91, bcm283x - significant additions to existing SoC support on mediatek, qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1 As usual, a lot more detail is available in the individual merge commits" * tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits) ARM: mvebu: fix unit address on armada-390-db flash ARM: dts: Move .dts files to vendor sub-directories kbuild: Support flat DTBs install ARM: dts: Add .dts files missing from the build ARM: dts: allwinner: Use quoted #include ARM: dts: lan966x: kontron-d10: add PHY interrupts ARM: dts: lan966x: kontron-d10: fix SPI CS ARM: dts: lan966x: kontron-d10: fix board reset ARM: dts: at91: Enable device-tree overlay support for AT91 boards arm: dts: Enable device-tree overlay support for AT91 boards arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller ARM: dts: at91: use generic name for shutdown controller ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML riscv: dts: sort makefile entries by directory riscv: defconfig: enable T-HEAD SoC MAINTAINERS: add entry for T-HEAD RISC-V SoC riscv: dts: thead: add sipeed Lichee Pi 4A board device tree riscv: dts: add initial T-HEAD TH1520 SoC device tree riscv: Add the T-HEAD SoC family Kconfig option ...

dt-bindings: ata: dwc-ahci: add Rockchip RK3588

2023-06-23T00:33:53+00:00

This adds Rockchip RK3588 AHCI binding. In order to narrow down the allowed clocks without bloating the generic binding, the description of Rockchip's AHCI controllers has been moved to its own file. Signed-off-by: Sebastian Reichel Reviewed-by: Serge Semin Reviewed-by: Krzysztof Kozlowski Signed-off-by: Damien Le Moal

dt-bindings: ata: dwc-ahci: add PHY clocks

2023-06-23T00:33:53+00:00

Add PHY transmit and receive clocks as described by the DW SATA AHCI HW manual. Suggested-by: Serge Semin Reviewed-by: Serge Semin Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sebastian Reichel Signed-off-by: Damien Le Moal

Merge tag 'zynqmp-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx into soc/dt

2023-06-20T20:50:16+00:00

arm64: ZynqMP DT changes for v6.5 Various small fixes and cleanups to be aligned with the latest dt-schema. Other major changes are: - Wire mali-400 gpu - Change board name for zcu1275 - Use ethernet-phy-id to handle ETH phy reset properly - Switch to amd.com emails - Update people in DT bindings * tag 'zynqmp-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx: (33 commits) dt-bindings: usb: xilinx: Replace Manish by Piyush dt-bindings: xilinx: Remove Rajan, Jolly and Manish arm64: zynqmp: Used fixed-partitions for QSPI in k26 arm64: zynqmp: Add pmu interrupt-affinity arm64: zynqmp: Set qspi tx-buswidth to 4 arm64: zynqmp: Fix usb node drive strength and slew rate arm64: zynqmp: Describe TI phy as ethernet-phy-id arm64: zynqmp: Switch to amd.com emails arm64: zynqmp: Convert kv260-revA overlay to ASCII text dt-bindings: xilinx: Switch xilinx.com emails to amd.com arm64: xilinx: Use zynqmp prefix for SOM dt overlays arm64: zynqmp: Add phase tags marking arm64: zynqmp: Describe bus-width for SD card on KV260 arm64: zynqmp: Enable AMS on SOM and other zcu10x boards arm64: zynqmp: Enable DP driver for SOMs arm64: zynqmp: Setup clock for DP and DPDMA arm64: zynqmp: Switch to ethernet-phy-id in kv260 arm64: zynqmp: Disable USB3.0 for zc1751-xm016-dc2 arm64: zynqmp: Add pinctrl emmc description to SM-K26 arm64: zynqmp: Add gpio labels for modepin gpio ... Link: https://lore.kernel.org/r/CAHTX3d+2s_KmCnd=x5hydGb+LYoznAzYGTizvqqN2NFmrBurfw@mail.gmail.com Signed-off-by: Arnd Bergmann

Merge tag 'devicetree-fixes-for-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2023-06-13T17:27:56+00:00

Pull devicetree fixes from Rob Herring: - Fix missing of_node_put() in init_overlay_changeset() - Fix schema for qcom,pmic-mpp "qcom,paired" property - Fix 'additionalProperties' in silvaco,i3c-master binding - usage-model.rst: Use documented "arm,primecell" compatible string - Update Damien Le Moal's email address - Fixes in Realtek Bluetooth binding * tag 'devicetree-fixes-for-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: qcom,pmic-mpp: Fix schema for "qcom,paired" dt-bindings: i3c: silvaco,i3c-master: fix missing schema restriction of: overlay: Fix missing of_node_put() in error case of init_overlay_changeset() docs: zh_CN/devicetree: sync usage-model fix docs: dt: fix documented Primecell compatible string dt-bindings: Change Damien Le Moal's contact email dt-bindings: net: realtek-bluetooth: Fix double RTL8723CS in desc dt-bindings: net: realtek-bluetooth: Fix RTL8821CS binding

dt-bindings: Change Damien Le Moal's contact email

2023-06-08T13:31:27+00:00

Change my email address to dlemoal@kernel.org. Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20230514222614.115299-1-dlemoal@kernel.org Signed-off-by: Rob Herring

dt-bindings: xilinx: Switch xilinx.com emails to amd.com

2023-06-05T11:09:19+00:00

@xilinx.com is still working but better to switch to new amd.com after AMD/Xilinx acquisition. Acked-by: Sebastian Reichel Acked-by: Wolfram Sang # for I2C Acked-by: Mark Brown Acked-by: Jassi Brar Acked-by: Damien Le Moal Acked-by: Krzysztof Kozlowski Acked-by: Guenter Roeck Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/f5b2bd1e78407e4128fc8f0b5874ba723e710a88.1684245058.git.michal.simek@amd.com