Linux kernel stable tree (mirror) https://git.radix-linux.su/kernel/linux.git/atom?h=v6.18.22 2025-10-08T16:44:38+00:00 2025-10-08T16:44:38+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-08T16:44:38+00:00 urn:sha1:99cedb6b8f4101e2780f10b9e76d2f346a1e4316 Pull input updates from Dmitry Torokhov: - Conversions to yaml/json schema and fixes for input-related device tree bindings - New drivers: - Awinic AW86927 haptic chip - Hynitron CST816x series controller - Himax HX852x(ES) touchscreen controller - Fix uinput to not leak kernel memory via a gap in uinput_ff_upload_compat structure - Prevent overflow in pressure calculation in tsc2007 driver causing phantom touches - Make the Atmel maxTouch driver support generic touchscreen configuration (flip, rotate, etc) - Drop support for platform data in tca8418_keypad, pxa27x-keypad, spear-keyboard and twl4030_keypad drivers, they all now rely on generic device properties for configuration - Other assorted changes and fixes * tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits) Input: atmel_mxt_ts - allow reset GPIO to sleep Input: aw86927 - fix error code in probe() Input: psxpad-spi - add a check for the return value of spi_setup() Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak Input: aw86927 - add driver for Awinic AW86927 dt-bindings: input: Add Awinic AW86927 dt-bindings: touchscreen: remove touchscreen.txt dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node dt-bindings: touchscreen: convert eeti bindings to json schema Input: pm8941-pwrkey - disable wakeup for resin by default dt-bindings: input: pm8941-pwrkey: Document wakeup-source property Input: add driver for Hynitron CST816x series dt-bindings: input: touchscreen: add hynitron cst816x series Input: imx6ul_tsc - set glitch threshold by DTS property dt-bindings: touchscreen: fsl,imx6ul-tsc: support glitch thresold dt-bindings: touchscreen: add debounce-delay-us property Input: ps2-gpio - fix typo Input: atmel_mxt_ts - add support for generic touchscreen configurations dt-bindings: input: maxtouch: add common touchscreen properties dt-bindings: touchscreen: convert zet6223 bindings to json schema ... 2025-10-04T23:26:32+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-04T23:26:32+00:00 urn:sha1:6093a688a07da07808f0122f9aa2a3eed250d853 Pull Char/Misc/IIO/Binder updates from Greg KH: "Here is the big set of char/misc/iio and other driver subsystem changes for 6.18-rc1. Loads of different stuff in here, it was a busy development cycle in lots of different subsystems, with over 27k new lines added to the tree. Included in here are: - IIO updates including new drivers, reworking of existing apis, and other goodness in the sensor subsystems - MEI driver updates and additions - NVMEM driver updates - slimbus removal for an unused driver and some other minor updates - coresight driver updates and additions - MHI driver updates - comedi driver updates and fixes - extcon driver updates - interconnect driver additions - eeprom driver updates and fixes - minor UIO driver updates - tiny W1 driver updates But the majority of new code is in the rust bindings and additions, which includes: - misc driver rust binding updates for read/write support, we can now write "normal" misc drivers in rust fully, and the sample driver shows how this can be done. - Initial framework for USB driver rust bindings, which are disabled for now in the build, due to limited support, but coming in through this tree due to dependencies on other rust binding changes that were in here. I'll be enabling these back on in the build in the usb.git tree after -rc1 is out so that developers can continue to work on these in linux-next over the next development cycle. - Android Binder driver implemented in Rust. This is the big one, and was driving a huge majority of the rust binding work over the past years. Right now there are two binder drivers in the kernel, selected only at build time as to which one to use as binder wants to be included in the system at boot time. The binder C maintainers all agreed on this, as eventually, they want the C code to be removed from the tree, but it will take a few releases to get there while both are maintained to ensure that the rust implementation is fully stable and compliant with the existing userspace apis. All of these have been in linux-next for a while" * tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits) rust: usb: keep usb::Device private for now rust: usb: don't retain device context for the interface parent USB: disable rust bindings from the build for now samples: rust: add a USB driver sample rust: usb: add basic USB abstractions coresight: Add label sysfs node support dt-bindings: arm: Add label in the coresight components coresight: tnoc: add new AMBA ID to support Trace Noc V2 coresight: Fix incorrect handling for return value of devm_kzalloc coresight: tpda: fix the logic to setup the element size coresight: trbe: Return NULL pointer for allocation failures coresight: Refactor runtime PM coresight: Make clock sequence consistent coresight: Refactor driver data allocation coresight: Consolidate clock enabling coresight: Avoid enable programming clock duplicately coresight: Appropriately disable trace bus clocks coresight: Appropriately disable programming clocks coresight: etm4x: Support atclk coresight: catu: Support atclk ... 2025-10-02T19:47:25+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-02T19:47:25+00:00 urn:sha1:58809f614e0e3f4e12b489bddf680bfeb31c0a20 Pull drm updates from Dave Airlie: "cross-subsystem: - i2c-hid: Make elan touch controllers power on after panel is enabled - dt bindings for STM32MP25 SoC - pci vgaarb: use screen_info helpers - rust pin-init updates - add MEI driver for late binding firmware update/load uapi: - add ioctl for reassigning GEM handles - provide boot_display attribute on boot-up devices core: - document DRM_MODE_PAGE_FLIP_EVENT - add vendor specific recovery method to drm device wedged uevent gem: - Simplify gpuvm locking ttm: - add interface to populate buffers sched: - Fix race condition in trace code atomic: - Reallow no-op async page flips display: - dp: Fix command length video: - Improve pixel-format handling for struct screen_info rust: - drop Opaque<> from ioctl args - Alloc: - BorrowedPage type and AsPageIter traits - Implement Vmalloc::to_page() and VmallocPageIter - DMA/Scatterlist: - Add dma::DataDirection and type alias for dma_addr_t - Abstraction for struct scatterlist and sg_table - DRM: - simplify use of generics - add DriverFile type alias - drop Object::SIZE - Rust: - pin-init tree merge - Various methods for AsBytes and FromBytes traits gpuvm: - Support madvice in Xe driver gpusvm: - fix hmm_pfn_to_map_order usage in gpusvm bridge: - Improve and fix ref counting on bridge management - cdns-dsi: Various improvements to mode setting - Support Solomon SSD2825 plus DT bindings - Support Waveshare DSI2DPI plus DT bindings - Support Content Protection property - display-connector: Improve DP display detection - Add support for Radxa Ra620 plus DT bindings - adv7511: Provide SPD and HDMI infoframes - it6505: Replace crypto_shash with sha() - synopsys: Add support for DW DPTX Controller plus DT bindings - adv7511: Write full Audio infoframe - ite6263: Support vendor-specific infoframes - simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings panel: - panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64; Support SHP LQ134Z1; Fixes - panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings - Support Samsung AMS561RA01 - Support Hydis HV101HD1 plus DT bindings - ilitek-ili9881c: Refactor mode setting; Add support for Bestar BSD1218-A101KL68 LCD plus DT bindings - lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings - edp: Add support for additonal mt8189 Chromebook panels - lvds: Add DT bindings for EDT ETML0700Z8DHA amdgpu: - add CRIU support for gem objects - RAS updates - VCN SRAM load fixes - EDID read fixes - eDP ALPM support - Documentation updates - Rework PTE flag generation - DCE6 fixes - VCN devcoredump cleanup - MMHUB client id fixes - VCN 5.0.1 RAS support - SMU 13.0.x updates - Expanded PCIe DPC support - Expanded VCN reset support - VPE per queue reset support - give kernel jobs unique id for tracing - pre-populate exported buffers - cyan skillfish updates - make vbios build number available in sysfs - userq updates - HDCP updates - support MMIO remap page as ttm pool - JPEG parser updates - DCE6 DC updates - use devm for i2c buses - GPUVM locking updates - Drop non-DC DCE11 code - improve fallback handling for pixel encoding amdkfd: - SVM/page migration fixes - debugfs fixes - add CRIO support for gem objects - SVM updates radeon: - use dev_warn_once in CS parsers xe: - add madvise interface - add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count and memory attributes - drop L# bank mask reporting from media GT3 on Xe3+. - add SLPC power_profile sysfs interface - add configs attribs to add post/mid context-switch commands - handle firmware reported hardware errors notifying userspace with device wedged uevent - use same dir structure across sysfs/debugfs - cleanup and future proof vram region init - add G-states and PCI link states to debugfs - Add SRIOV support for CCS surfaces on Xe2+ - Enable SRIOV PF mode by default on supported platforms - move flush to common code - extended core workarounds for Xe2/3 - use DRM scheduler for delayed GT TLB invalidations - configs improvements and allow VF device enablement - prep work to expose mmio regions to userspace - VF migration support added - prepare GPU SVM for THP migration - start fixing XE_PAGE_SIZE vs PAGE_SIZE - add PSMI support for hw validation - resize VF bars to max possible size according to number of VFs - Ensure GT is in C0 during resume - pre-populate exported buffers - replace xe_hmm with gpusvm - add more SVM GT stats to debugfs - improve fake pci and WA kunnit handle for new platform testing - Test GuC to GuC comms to add debugging - use attribute groups to simplify sysfs registration - add Late Binding firmware code to interact with MEI i915: - apply multiple JSL/EHL/Gen7/Gen6 workarounds properly - protect against overflow in active_engine() - Use try_cmpxchg64() in __active_lookup() - include GuC registers in error state - get rid of dev->struct_mutex - iopoll: generalize read_poll_timout - lots more display refactoring - Reject HBR3 in any eDP Panel - Prune modes for YUV420 - Display Wa fix, additions, and updates - DP: Fix 2.7 Gbps link training on g4x - DP: Adjust the idle pattern handling - DP: Shuffle the link training code a bit - Don't set/read the DSI C clock divider on GLK - Enable_psr kernel parameter changes - Type-C enabled/disconnected dp-alt sink - Wildcat Lake enabling - DP HDR updates - DRAM detection - wait PSR idle on dsb commit - Remove FBC modulo 4 restriction for ADL-P+ - panic: refactor framebuffer allocation habanalabs: - debug/visibility improvements - vmalloc-backed coherent mmap support - HLDIO infrastructure nova-core: - various register!() macro improvements - minor vbios/firmware fixes/refactoring - advance firmware boot stages; process Booter and patch signatures - process GSP and GSP bootloader - Add r570.144 firmware bindings and update to it - Move GSP boot code to own module - Use new pin-init features to store driver's private data in a single allocation - Update ARef import from sync::aref nova-drm: - Update ARef import from sync::aref tyr: - initial driver skeleton for a rust driver for ARM Mali GPUs - capable of powering up, query metadata and provide it to userspace. msm: - GPU and Core: - in DT bindings describe clocks per GPU type - GMU bandwidth voting for x1-85 - a623/a663 speedbins - cleanup some remaining no-iommu leftovers after VM_BIND conversion - fix GEM obj 32b size truncation - add missing VM_BIND param validation - IFPC for x1-85 and a750 - register xml and gen_header.py sync from mesa - Display: - add missing bindings for display on SC8180X - added DisplayPort MST bindings - conversion from round_rate() to determine_rate() amdxdna: - add IOCTL_AMDXDNA_GET_ARRAY - support user space allocated buffers - streamline PM interfaces - Refactoring wrt. hardware contexts - improve error reporting nouveau: - use GSP firmware by default - improve error reporting - Pre-populate exported buffers ast: - Clean up detection of DRAM config exynos: - add DSIM bridge driver support for Exynos7870 - Document Exynos7870 DSIM compatible in dt-binding panthor: - Print task/pid on errors - Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25 - Improve cache flushing - Fail VM bind if BO has offset renesas: - convert to RUNTIME_PM_OPS rcar-du: - Make number of lanes configurable - Use RUNTIME_PM_OPS - Add support for DSI commands rocket: - Add driver for Rockchip NPU plus DT bindings - Use kfree() and sizeof() correctly - Test DMA status rockchip: - dsi2: Add support for RK3576 plus DT bindings - Add support for RK3588 DPTX output tidss: - Use crtc_ fields for programming display mode - Remove other drivers from aperture pixpaper: - Add support for Mayqueen Pixpaper plus DT bindings v3d: - Support querying nubmer of GPU resets for KHR_robustness stm: - Clean up logging - ltdc: Add support support for STM32MP257F-EV1 plus DT bindings sitronix: - st7571-i2c: Add support for inverted displays and 2-bit grayscale tidss: - Convert to kernel's FIELD_ macros vesadrm: - Support 8-bit palette mode imagination: - Improve power management - Add support for TH1520 GPU - Support Risc-V architectures v3d: - Improve job management and locking vkms: - Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x - Spport YUV with 16-bit components" * tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits) drm/amd: Add name to modes from amdgpu_connector_add_common_modes() drm/amd: Drop some common modes from amdgpu_connector_add_common_modes() drm/amdgpu: update MODULE_PARM_DESC for freesync_video drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes() drm/amd/display: Share dce100_validate_global with DCE6-8 drm/amd/display: Share dce100_validate_bandwidth with DCE6-8 drm/amdgpu: Fix fence signaling race condition in userqueue amd/amdkfd: enhance kfd process check in switch partition amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw drm/amd/display: Reject modes with too high pixel clock on DCE6-10 drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes() drm/amd/display: Only enable common modes for eDP and LVDS drm/amdgpu: remove the redeclaration of variable i drm/amdgpu/userq: assign an error code for invalid userq va drm/amdgpu: revert "rework reserved VMID handling" v2 drm/amdgpu: remove leftover from enforcing isolation by VMID drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails accel/habanalabs: add Infineon version check accel/habanalabs/gaudi2: read preboot status after recovering from dirty state accel/habanalabs: add HL_GET_P_STATE passthrough type ... 2025-10-02T00:32:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-02T00:32:51+00:00 urn:sha1:38057e323657695ec8f814aff0cdd1c7e00d3e9b Pull SoC driver updates from Arnd Bergmann: "Lots of platform specific updates for Qualcomm SoCs, including a new TEE subsystem driver for the Qualcomm QTEE firmware interface. Added support for the Apple A11 SoC in drivers that are shared with the M1/M2 series, among more updates for those. Smaller platform specific driver updates for Renesas, ASpeed, Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs. Driver updates in the cache controller, memory controller and reset controller subsystems. SCMI firmware updates to add more features and improve robustness. This includes support for having multiple SCMI providers in a single system. TEE subsystem support for protected DMA-bufs, allowing hardware to access memory areas that managed by the kernel but remain inaccessible from the CPU in EL1/EL0" * tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits) soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu() soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver soc: fsl: qe: Change GPIO driver to a proper platform driver tee: fix register_shm_helper() pmdomain: apple: Add "apple,t8103-pmgr-pwrstate" dt-bindings: spmi: Add Apple A11 and T2 compatible serial: qcom-geni: Load UART qup Firmware from linux side spi: geni-qcom: Load spi qup Firmware from linux side i2c: qcom-geni: Load i2c qup Firmware from linux side soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem soc: qcom: geni-se: Cleanup register defines and update copyright dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus Documentation: tee: Add Qualcomm TEE driver tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl tee: qcom: add primordial object tee: add Qualcomm TEE driver tee: increase TEE_MAX_ARG_SIZE to 4096 tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF tee: add close_context to TEE driver operation ... 2025-10-02T00:19:38+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-02T00:19:38+00:00 urn:sha1:0f048c878ee32a4259dbf28e0ad8fd0b71ee0085 Pull SoC dt updates from Arnd Bergmann: "There are five sets of new SoCs that get added in existing families, all of them being either upgrades or cut-down versions of the older chips: - Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation of high-end workstations and laptops from Apple. Linux has been working on these for a while but stil requires patches. - Axis Artpec8 is an Armv8 chip based on Samsung Exynos design, unlike the earlier Armv7 Artpec6 from the same company that was part of a separate family of chips. - NXP i.MX91 is a cut-down version of i.MX93, using only a single Cortex-A55 core. - Qualcomm Lemans Auto is a variant of the Lemans SoC that was originally merged under the sa8775p name, the differences being mostly the firmware configuration of the platform. - Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44), RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial bedded SoCs based on Cortex-A55 cores In total, there are 65 new machines, including: - Industrial embedded system and single-board computers based on NXP, Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips. - Reference boards for the newly added Renesas, Qualcomm, NXP and Axis ARMv8 chips as well as Microchip's MPFS RISC-V SoC - Laptops and Workstations using Apple M2 and Qualcomm Snapdragon X1 chips. - Several Samsung phones using Qualcomm Snapdragon chips - Set-top boxes based on Allwinner H313 - Five BMC boards using 32-bit ASpeed SoCs - Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708 (ARMv7) SoCs Two machines get phased out because they were available only in small quantities but never made it into products: one STi407 based reference board, and a Snapdragon 845 based Chromebook. Aside from the newly added machines, a lot of work went into improving hardware support on the existing machines and cleaning up contents for validation" * tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (931 commits) arm64: dts: apm-shadowcat: Drop "apm,xgene2-pcie" compatible arm64: dts: apm-shadowcat: Move slimpro nodes out of "simple-bus" node ARM: dts: microchip: sam9x7: Add qspi controller arm64: dts: qcom: Add MST pixel streams for displayport arm64: dts: qcom: sm6350: correct DP compatibility strings arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU arm64: dts: qcom: qcs8300: Add gpu and gmu nodes arm64: dts: allwinner: h313: Add Amediatech X96Q dt-bindings: arm: sunxi: Add Amediatech X96Q arm64: dts: apple: t8015: Add SPMI node arm64: dts: apple: t8012: Add SPMI node arm64: dts: apple: Add J180d (Mac Pro, M2 Ultra, 2023) device tree arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT arm64: dts: rockchip: update pinctrl names for Radxa E52C arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C arm64: dts: apple: Add J474s, J475c and J475d device trees arm64: dts: apple: Add J414 and J416 Macbook Pro device trees arm64: dts: apple: Add initial t6020/t6021/t6022 DTs ... 2025-10-01T23:58:24+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-01T23:58:24+00:00 urn:sha1:9792d660a4e91d31a6b1af105ae3f1c29107e94b Pull devicetree updates from Rob Herring: "DT core: - Update dtc to upstream version v1.7.2-35-g52f07dcca47c - Add stub for of_get_next_child_with_prefix() - Convert of_msi_map_id() callers to of_msi_xlate() DT bindings: - Convert multiple text board bindings to DT schema format - Add bindings for synaptics,synaptics_i2c touchscreen controller, innolux,n133hse-ea1 and nlt,nl12880bc20-spwg-24 displays, and NXP vf610 reboot controller - Add new Arm Cortex-A320/A520AE/A720AE and C1-Nano/Pro/Premium/Ultra CPUs. Add missing Applied Micro CPU compatibles. Add pu-supply and fsl,soc-operating-points properties for CPU nodes. - Add QCom Glymur PDC and tegra264-agic interrupt controllers - Add samsung,exynos8890-mali GPU to Arm Mali Midgard - Drop Samsung S3C2410 display related bindings - Allow separate DP lane and AUX connections in dp-connector - Add some missing, undocumented vendor prefixes - Add missing '#address-cells' properties in interrupt controller bindings which dtc now warns about - Drop duplicate socfpga-sdram-edac.txt, moxa,moxart-watchdog.txt, fsl/mpic.txt, ti,opa362.txt, and cavium-thunder2.txt legacy text bindings which are already covered by existing schemas. - Various binding fixes for Mediatek platforms in mailbox, regulator, pinctrl, timer, and display - Drop work-around for yamllint quoting of values containing ',' - Various spelling, typo, grammar, and duplicated words fixes in DT bindings and docs - Add binding guidelines for defining properties at top level of schemas, lack of node name ABI, and usage of simple-mfd" * tag 'devicetree-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (81 commits) dt-bindings: arm: altera: Drop socfpga-sdram-edac.txt dt-bindings: gpu: Convert nvidia,gk20a to DT schema dt-bindings: rng: sparc_sun_oracle_rng: convert to DT schema dt-bindings: vendor-prefixes: update regex for properties without a prefix dt-bindings: display: bridge: convert megachips-stdpxxxx-ge-b850v3-fw.txt to yaml scripts: dt_to_config: fix grammar and a typo in --help text dt-bindings: fix spelling, typos, grammar, duplicated words docs: dt: fix grammar and spelling of: base: Add of_get_next_child_with_prefix() stub dt-bindings: trivial-devices: Add compatible string synaptics,synaptics_i2c dt-bindings: soc: mediatek: pwrap: Add power-domains property dt-bindings: pinctrl: mt65xx: Allow gpio-line-names dt-bindings: media: Convert MediaTek mt8173-vpu bindings to DT schema dt-bindings: arm: mediatek: Support mt8183-audiosys variant dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional dt-bindings: regulator: mediatek,mt6331: Add missing compatible dt-bindings: regulator: mediatek,mt6331: Fix various regulator names dt-bindings: regulator: mediatek,mt6332-regulator: Add missing compatible dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing base reg dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing pwm_ch7_2 ... 2025-09-29T02:40:45+00:00 Rob Herring (Arm) robh@kernel.org 2025-09-26T21:47:37+00:00 urn:sha1:129b91fc329604e05f794dc1a18a6da3eb518b4e The contents of arm/altera/socfpga-sdram-edac.txt are already covered by edac/altr,socfpga-ecc-manager.yaml except for the "altr,sdram-edac" compatible string. Add the compatible and drop the old .txt binding doc. Acked-by: Matthew Gerlach <matthew.gerlach@altera.com> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> 2025-09-26T20:53:29+00:00 Markus Heidelberg m.heidelberg@cab.de 2025-09-26T10:57:48+00:00 urn:sha1:d6f57d8c5a5aede34c72382cdbd5b35616e171e6 Signed-off-by: Markus Heidelberg <m.heidelberg@cab.de> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> 2025-09-26T19:50:44+00:00 Julien Massot julien.massot@collabora.com 2025-08-26T07:39:36+00:00 urn:sha1:37020f865aa3c4049266cb34cf83ef299184ae80 Update the mediatek,audsys binding to support the mt8183-audiosys compatible, which uses a different audio controller (mediatek,mt8183-audio.yaml) compared to the legacy mt2701-audio controller. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Julien Massot <julien.massot@collabora.com> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> 2025-09-25T18:36:22+00:00 Dario Binacchi dario.binacchi@amarulasolutions.com 2025-09-25T15:31:34+00:00 urn:sha1:6b4896e404c7053cf09a6f58fd09684262fab6dd Convert Raspberry Pi firmware 7" touchscreen controller device tree binding to json-schema. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250925153144.4082786-2-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>