kernel/linux.git/Documentation/admin-guide/sysctl, branch v6.19.11

Merge tag 'vfs-6.19-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

2026-01-26T17:30:48+00:00

Pull vfs fixes from Christian Brauner: - Fix the the buggy conversion of fuse_reverse_inval_entry() introduced during the creation rework - Disallow nfs delegation requests for directories by setting simple_nosetlease() - Require an opt-in for getting readdir flag bits outside of S_DT_MASK set in d_type - Fix scheduling delayed writeback work by only scheduling when the dirty time expiry interval is non-zero and cancel the delayed work if the interval is set to zero - Use rounded_jiffies_interval for dirty time work - Check the return value of sb_set_blocksize() for romfs - Wait for batched folios to be stable in __iomap_get_folio() - Use private naming for fuse hash size - Fix the stale dentry cleanup to prevent a race that causes a UAF * tag 'vfs-6.19-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: vfs: document d_dispose_if_unused() fuse: shrink once after all buckets have been scanned fuse: clean up fuse_dentry_tree_work() fuse: add need_resched() before unlocking bucket fuse: make sure dentry is evicted if stale fuse: fix race when disposing stale dentries fuse: use private naming for fuse hash size writeback: use round_jiffies_relative for dirtytime_work iomap: wait for batched folios to be stable in __iomap_get_folio romfs: check sb_set_blocksize() return value docs: clarify that dirtytime_expire_seconds=0 disables writeback writeback: fix 100% CPU usage when dirtytime_expire_interval is 0 readdir: require opt-in for d_type flags vboxsf: don't allow delegations to be set on directories ceph: don't allow delegations to be set on directories gfs2: don't allow delegations to be set on directories 9p: don't allow delegations to be set on directories smb/client: properly disallow delegations on directories nfs: properly disallow delegation requests on directories fuse: fix conversion of fuse_reverse_inval_entry() to start_removing()

Docs/mm/allocation-profiling: describe sysctrl limitations in debug mode

2026-01-20T17:34:26+00:00

When CONFIG_MEM_ALLOC_PROFILING_DEBUG=y, /proc/sys/vm/mem_profiling is read-only to avoid debug warnings in a scenario when an allocation is made while profiling is disabled (allocation does not get an allocation tag), then profiling gets enabled and allocation gets freed (warning due to the allocation missing allocation tag). Link: https://lkml.kernel.org/r/20260116184423.2708363-1-surenb@google.com Fixes: ebdf9ad4ca98 ("memprofiling: documentation") Reported-by: Andrew Morton Signed-off-by: Suren Baghdasaryan Acked-by: SeongJae Park Cc: Jonathan Corbet Cc: Kent Overstreet Cc: Matthew Wilcox (Oracle) Cc: Ran Xiaokai Cc: SeongJae Park Signed-off-by: Andrew Morton

net: add net.core.qdisc_max_burst

2026-01-13T09:12:11+00:00

In blamed commit, I added a check against the temporary queue built in __dev_xmit_skb(). Idea was to drop packets early, before any spinlock was acquired. if (unlikely(defer_count > READ_ONCE(q->limit))) { kfree_skb_reason(skb, SKB_DROP_REASON_QDISC_DROP); return NET_XMIT_DROP; } It turned out that HTB Qdisc has a zero q->limit. HTB limits packets on a per-class basis. Some of our tests became flaky. Add a new sysctl : net.core.qdisc_max_burst to control how many packets can be stored in the temporary lockless queue. Also add a new QDISC_BURST_DROP drop reason to better diagnose future issues. Thanks Neal ! Fixes: 100dfa74cad9 ("net: dev_queue_xmit() llist adoption") Reported-and-bisected-by: Neal Cardwell Signed-off-by: Eric Dumazet Reviewed-by: Neal Cardwell Link: https://patch.msgid.link/20260107104159.3669285-1-edumazet@google.com Signed-off-by: Paolo Abeni

docs: clarify that dirtytime_expire_seconds=0 disables writeback

2026-01-12T10:07:25+00:00

Document that setting vm.dirtytime_expire_seconds to zero disables periodic dirtytime writeback, matching the behavior of the related dirty_writeback_centisecs sysctl which already documents this. Signed-off-by: Laveesh Bansal Link: https://patch.msgid.link/20260106145059.543282-3-laveeshb@laveeshbansal.com Reviewed-by: Jan Kara Signed-off-by: Christian Brauner

Merge tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2025-12-06T22:01:20+00:00

Pull non-MM updates from Andrew Morton: - "panic: sys_info: Refactor and fix a potential issue" (Andy Shevchenko) fixes a build issue and does some cleanup in ib/sys_info.c - "Implement mul_u64_u64_div_u64_roundup()" (David Laight) enhances the 64-bit math code on behalf of a PWM driver and beefs up the test module for these library functions - "scripts/gdb/symbols: make BPF debug info available to GDB" (Ilya Leoshkevich) makes BPF symbol names, sizes, and line numbers available to the GDB debugger - "Enable hung_task and lockup cases to dump system info on demand" (Feng Tang) adds a sysctl which can be used to cause additional info dumping when the hung-task and lockup detectors fire - "lib/base64: add generic encoder/decoder, migrate users" (Kuan-Wei Chiu) adds a general base64 encoder/decoder to lib/ and migrates several users away from their private implementations - "rbree: inline rb_first() and rb_last()" (Eric Dumazet) makes TCP a little faster - "liveupdate: Rework KHO for in-kernel users" (Pasha Tatashin) reworks the KEXEC Handover interfaces in preparation for Live Update Orchestrator (LUO), and possibly for other future clients - "kho: simplify state machine and enable dynamic updates" (Pasha Tatashin) increases the flexibility of KEXEC Handover. Also preparation for LUO - "Live Update Orchestrator" (Pasha Tatashin) is a major new feature targeted at cloud environments. Quoting the cover letter: This series introduces the Live Update Orchestrator, a kernel subsystem designed to facilitate live kernel updates using a kexec-based reboot. This capability is critical for cloud environments, allowing hypervisors to be updated with minimal downtime for running virtual machines. LUO achieves this by preserving the state of selected resources, such as memory, devices and their dependencies, across the kernel transition. As a key feature, this series includes support for preserving memfd file descriptors, which allows critical in-memory data, such as guest RAM or any other large memory region, to be maintained in RAM across the kexec reboot. Mike Rappaport merits a mention here, for his extensive review and testing work. - "kexec: reorganize kexec and kdump sysfs" (Sourabh Jain) moves the kexec and kdump sysfs entries from /sys/kernel/ to /sys/kernel/kexec/ and adds back-compatibility symlinks which can hopefully be removed one day - "kho: fixes for vmalloc restoration" (Mike Rapoport) fixes a BUG which was being hit during KHO restoration of vmalloc() regions * tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (139 commits) calibrate: update header inclusion Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()" vmcoreinfo: track and log recoverable hardware errors kho: fix restoring of contiguous ranges of order-0 pages kho: kho_restore_vmalloc: fix initialization of pages array MAINTAINERS: TPM DEVICE DRIVER: update the W-tag init: replace simple_strtoul with kstrtoul to improve lpj_setup KHO: fix boot failure due to kmemleak access to non-PRESENT pages Documentation/ABI: new kexec and kdump sysfs interface Documentation/ABI: mark old kexec sysfs deprecated kexec: move sysfs entries to /sys/kernel/kexec test_kho: always print restore status kho: free chunks using free_page() instead of kfree() selftests/liveupdate: add kexec test for multiple and empty sessions selftests/liveupdate: add simple kexec-based selftest for LUO selftests/liveupdate: add userspace API selftests docs: add documentation for memfd preservation via LUO mm: memfd_luo: allow preserving memfd liveupdate: luo_file: add private argument to store runtime state mm: shmem: export some functions to internal.h ...

sys_info: add a default kernel sys_info mask

2025-11-20T22:03:43+00:00

Which serves as a global default sys_info mask. When users want the same system information for many error cases (panic, hung, lockup ...), they can chose to set this global knob only once, while not setting up each individual sys_info knobs. This just adds a 'lazy' option, and doesn't change existing kernel behavior as the mask is 0 by default. Link: https://lkml.kernel.org/r/20251113111039.22701-5-feng.tang@linux.alibaba.com Suggested-by: Andrew Morton Signed-off-by: Feng Tang Cc: Jonathan Corbet Cc: Lance Yang Cc: "Paul E . McKenney" Cc: Petr Mladek Cc: Steven Rostedt Signed-off-by: Andrew Morton

watchdog: add sys_info sysctls to dump sys info on system lockup

2025-11-20T22:03:43+00:00

When soft/hard lockup happens, developers may need different kinds of system information (call-stacks, memory info, locks, etc.) to help debugging. Add 'softlockup_sys_info' and 'hardlockup_sys_info' sysctl knobs to take human readable string like "tasks,mem,timers,locks,ftrace,...", and when system lockup happens, all requested information will be printed out. (refer kernel/sys_info.c for more details). Link: https://lkml.kernel.org/r/20251113111039.22701-4-feng.tang@linux.alibaba.com Signed-off-by: Feng Tang Reviewed-by: Petr Mladek Cc: Jonathan Corbet Cc: Lance Yang Cc: "Paul E . McKenney" Cc: Petr Mladek Cc: Steven Rostedt Signed-off-by: Andrew Morton

hung_task: add hung_task_sys_info sysctl to dump sys info on task-hung

2025-11-20T22:03:43+00:00

When task-hung happens, developers may need different kinds of system information (call-stacks, memory info, locks, etc.) to help debugging. Add 'hung_task_sys_info' sysctl knob to take human readable string like "tasks,mem,timers,locks,ftrace,...", and when task-hung happens, all requested information will be dumped. (refer kernel/sys_info.c for more details). Meanwhile, the newly introduced sys_info() call is used to unify some existing info-dumping knobs. [feng.tang@linux.alibaba.com: maintain consistecy established behavior, per Lance and Petr] Link: https://lkml.kernel.org/r/aRncJo1mA5Zk77Hr@U-2FWC9VHC-2323.local Link: https://lkml.kernel.org/r/20251113111039.22701-3-feng.tang@linux.alibaba.com Signed-off-by: Feng Tang Suggested-by: Petr Mladek Reviewed-by: Petr Mladek Reviewed-by: Lance Yang Cc: Jonathan Corbet Cc: "Paul E . McKenney" Cc: Steven Rostedt Signed-off-by: Andrew Morton

docs: panic: correct some sys_ifo names in sysctl doc

2025-11-20T22:03:43+00:00

Patch series "Enable hung_task and lockup cases to dump system info on demand", v2. When working on kernel stability issues: panic, task-hung and soft/hard lockup are frequently met. And to debug them, user may need lots of system information at that time, like task call stacks, lock info, memory info, ftrace dump, etc. panic case already uses sys_info() for this purpose, and has a 'panic_sys_info' sysctl(also support cmdline setup) interface to take human readable string like "tasks,mem,timers,locks,ftrace,..." to control what kinds of information is needed. Which is also helpful to debug task-hung and lockup cases. So this patchset introduces the similar sys_info sysctl interface for task-hung and lockup cases. his is mainly for debugging and the info dumping could be intrusive, like dumping call stack for all tasks when system has huge number of tasks, similarly for ftrace dump (we may add tracing_stop() and tracing_start() around it) Locally these have been used in our bug chasing for stability issues and were helpful. As Andrew suggested, add a configurable global 'kernel_sys_info' knob. When error scenarios like panic/hung-task/lockup etc doesn't setup their own sys_info knob and calls sys_info() with parameter "0", this global knob will take effect. It could be used for other kernel cases like OOM, which may not need one dedicated sys_info knob. This patch (of 4): Some sys_info names wered forgotten to change in patch iterations, while the right names are defined in kernel/sys_info.c. Link: https://lkml.kernel.org/r/20251113111039.22701-1-feng.tang@linux.alibaba.com Link: https://lkml.kernel.org/r/20251113111039.22701-2-feng.tang@linux.alibaba.com Fixes: d747755917bf ("panic: add 'panic_sys_info' sysctl to take human readable string parameter") Signed-off-by: Feng Tang Reviewed-by: Petr Mladek Cc: Jonathan Corbet Cc: Lance Yang Cc: "Paul E . McKenney" Cc: Steven Rostedt Signed-off-by: Andrew Morton

hung_task: panic when there are more than N hung tasks at the same time

2025-11-12T18:00:14+00:00

The hung_task_panic sysctl is currently a blunt instrument: it's all or nothing. Panicking on a single hung task can be an overreaction to a transient glitch. A more reliable indicator of a systemic problem is when multiple tasks hang simultaneously. Extend hung_task_panic to accept an integer threshold, allowing the kernel to panic only when N hung tasks are detected in a single scan. This provides finer control to distinguish between isolated incidents and system-wide failures. The accepted values are: - 0: Don't panic (unchanged) - 1: Panic on the first hung task (unchanged) - N > 1: Panic after N hung tasks are detected in a single scan The original behavior is preserved for values 0 and 1, maintaining full backward compatibility. [lance.yang@linux.dev: new changelog] Link: https://lkml.kernel.org/r/20251015063615.2632-1-lirongqing@baidu.com Signed-off-by: Li RongQing Reviewed-by: Masami Hiramatsu (Google) Reviewed-by: Lance Yang Tested-by: Lance Yang Acked-by: Andrew Jeffery [aspeed_g5_defconfig] Cc: Anshuman Khandual Cc: Arnd Bergmann Cc: David Hildenbrand Cc: Florian Wesphal Cc: Jakub Kacinski Cc: Jason A. Donenfeld Cc: Joel Granados Cc: Joel Stanley Cc: Jonathan Corbet Cc: Kees Cook Cc: Liam Howlett Cc: Lorenzo Stoakes Cc: "Paul E . McKenney" Cc: Pawan Gupta Cc: Petr Mladek Cc: Phil Auld Cc: Randy Dunlap Cc: Russell King Cc: Shuah Khan Cc: Simon Horman Cc: Stanislav Fomichev Cc: Steven Rostedt Signed-off-by: Andrew Morton