kernel/linux.git/Documentation/admin-guide/sysctl/net.rst, branch v6.18.21

net: set net.core.rmem_max and net.core.wmem_max to 4 MB

2025-08-21T02:35:00+00:00

SO_RCVBUF and SO_SNDBUF have limited range today, unless distros or system admins change rmem_max and wmem_max. Even iproute2 uses 1 MB SO_RCVBUF which is capped by the kernel. Decouple [rw]mem_max and [rw]mem_default and increase [rw]mem_max to 4 MB. Before: $ sysctl net.core.rmem_default net.core.rmem_max net.core.wmem_default net.core.wmem_max net.core.rmem_default = 212992 net.core.rmem_max = 212992 net.core.wmem_default = 212992 net.core.wmem_max = 212992 After: $ sysctl net.core.rmem_default net.core.rmem_max net.core.wmem_default net.core.wmem_max net.core.rmem_default = 212992 net.core.rmem_max = 4194304 net.core.wmem_default = 212992 net.core.wmem_max = 4194304 Signed-off-by: Eric Dumazet Reviewed-by: Neal Cardwell Link: https://patch.msgid.link/20250819174030.1986278-1-edumazet@google.com Signed-off-by: Jakub Kicinski

ARC: Add eBPF JIT support

2024-05-12T23:51:36+00:00

This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi Link: https://lore.kernel.org/r/20240430145604.38592-1-list+bpf@vahedi.org Signed-off-by: Alexei Starovoitov

net: make SK_MEMORY_PCPU_RESERV tunable

2024-02-28T09:23:08+00:00

This patch adds /proc/sys/net/core/mem_pcpu_rsv sysctl file, to make SK_MEMORY_PCPU_RESERV tunable. Commit 3cd3399dd7a8 ("net: implement per-cpu reserves for memory_allocated") introduced per-cpu forward alloc cache: "Implement a per-cpu cache of +1/-1 MB, to reduce number of changes to sk->sk_prot->memory_allocated, which would otherwise be cause of false sharing." sk_prot->memory_allocated points to global atomic variable: atomic_long_t tcp_memory_allocated ____cacheline_aligned_in_smp; If increasing the per-cpu cache size from 1MB to e.g. 16MB, changes to sk->sk_prot->memory_allocated can be further reduced. Performance may be improved on system with many cores. Signed-off-by: Adam Li Reviewed-by: Christoph Lameter (Ampere) Signed-off-by: David S. Miller

net: increase optmem_max default value

2023-12-15T11:01:26+00:00

For many years, /proc/sys/net/core/optmem_max default value on a 64bit kernel has been 20 KB. Regular usage of TCP tx zerocopy needs a bit more. Google has used 128KB as the default value for 7 years without any problem. Signed-off-by: Eric Dumazet Reviewed-by: Willem de Bruijn Reviewed-by: Willem de Bruijn Acked-by: Neal Cardwell Signed-off-by: David S. Miller

bpf, docs: Add loongarch64 as arch supporting BPF JIT

2023-09-21T22:30:09+00:00

As BPF JIT support for loongarch64 was added about one year ago with commit 5dc615520c4d ("LoongArch: Add BPF JIT support"), it is appropriate to add loongarch64 as arch supporting BPF JIT in bpf and sysctl docs as well. Signed-off-by: Tiezhu Yang Link: https://lore.kernel.org/r/1695111937-19697-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Martin KaFai Lau

Documentation: net: net.core.txrehash is not specific to listening sockets

2023-05-25T11:20:45+00:00

The net.core.txrehash documentation mentions this knob is for listening sockets only, while sk_rethink_txhash can be called on SYN and RTO retransmits on all TCP sockets. Remove the listening socket part. Signed-off-by: Antoine Tenart Reviewed-by: Eric Dumazet Signed-off-by: Paolo Abeni

net: introduce default_rps_mask netns attribute

2023-02-10T01:45:55+00:00

If RPS is enabled, this allows configuring a default rps mask, which is effective since receive queue creation time. A default RPS mask allows the system admin to ensure proper isolation, avoiding races at network namespace or device creation time. The default RPS mask is initially empty, and can be modified via a newly added sysctl entry. Signed-off-by: Paolo Abeni Reviewed-by: Simon Horman Reviewed-by: Eric Dumazet Signed-off-by: Jakub Kicinski

bpf: Use bpf_capable() instead of CAP_SYS_ADMIN for blinding decision

2022-09-16T20:11:57+00:00

The full CAP_SYS_ADMIN requirement for blinding looks too strict nowadays. These days given unprivileged BPF is disabled by default, the main users for constant blinding coming from unprivileged in particular via cBPF -> eBPF migration (e.g. old-style socket filters). Signed-off-by: Yauheni Kaliuta Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20220831090655.156434-1-ykaliuta@redhat.com Link: https://lore.kernel.org/bpf/20220905090149.61221-1-ykaliuta@redhat.com

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-08-25T23:07:42+00:00

drivers/net/ethernet/mellanox/mlx5/core/en_fs.c 21234e3a84c7 ("net/mlx5e: Fix use after free in mlx5e_fs_init()") c7eafc5ed068 ("net/mlx5e: Convert ethtool_steering member of flow_steering struct to pointer") https://lore.kernel.org/all/20220825104410.67d4709c@canb.auug.org.au/ https://lore.kernel.org/all/20220823055533.334471-1-saeed@kernel.org/ Signed-off-by: Jakub Kicinski

Documentation: sysctl: align cells in second content column

2022-08-25T01:42:51+00:00

Stephen Rothwell reported htmldocs warning when merging net-next tree: Documentation/admin-guide/sysctl/net.rst:37: WARNING: Malformed table. Text in column margin in table line 4. ========= =================== = ========== ================== Directory Content Directory Content ========= =================== = ========== ================== 802 E802 protocol mptcp Multipath TCP appletalk Appletalk protocol netfilter Network Filter ax25 AX25 netrom NET/ROM bridge Bridging rose X.25 PLP layer core General parameter tipc TIPC ethernet Ethernet protocol unix Unix domain sockets ipv4 IP version 4 x25 X.25 protocol ipv6 IP version 6 ========= =================== = ========== ================== The warning above is caused by cells in second "Content" column of /proc/sys/net subdirectory table which are in column margin. Align these cells against the column header to fix the warning. Link: https://lore.kernel.org/linux-next/20220823134905.57ed08d5@canb.auug.org.au/ Fixes: 1202cdd665315c ("Remove DECnet support from kernel") Reported-by: Stephen Rothwell Signed-off-by: Bagas Sanjaya Link: https://lore.kernel.org/r/20220824035804.204322-1-bagasdotme@gmail.com Signed-off-by: Jakub Kicinski