kernel/linux.git, branch v6.6.46

Linux 6.6.46

2024-08-14T11:59:04+00:00

Link: https://lore.kernel.org/r/20240812160132.135168257@linuxfoundation.org Tested-by: ChromeOS CQ Test Tested-by: Linux Kernel Functional Testing Tested-by: Peter Schneider Tested-by: Takeshi Ogasawara Tested-by: Mark Brown Tested-by: Florian Fainelli Tested-by: Jon Hunter Tested-by: Ron Economos Signed-off-by: Greg Kroah-Hartman

btrfs: fix double inode unlock for direct IO sync writes

2024-08-14T11:59:04+00:00

commit e0391e92f9ab4fb3dbdeb139c967dcfa7ac4b115 upstream. If we do a direct IO sync write, at btrfs_sync_file(), and we need to skip inode logging or we get an error starting a transaction or an error when flushing delalloc, we end up unlocking the inode when we shouldn't under the 'out_release_extents' label, and then unlock it again at btrfs_direct_write(). Fix that by checking if we have to skip inode unlocking under that label. Reported-by: syzbot+7dbbb74af6291b5a5a8b@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/000000000000dfd631061eaeb4bc@google.com/ Fixes: 939b656bc8ab ("btrfs: fix corruption after buffer fault in during direct IO append write") Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

Revert "selftests: mptcp: simult flows: mark 'unbalanced' tests as flaky"

2024-08-14T11:59:04+00:00

This reverts commit 052c9f0c140c78e5d6826688b5d2f33e19db0ae7. If the test doesn't pass, we can get this error: # ./simult_flows.sh: line 275: mptcp_lib_subtest_is_flaky: command not found This patch is not needed in v6.6: it is there to mark a test as "flaky", but the MPTCP selftests infrastructure in v6.6 doesn't support them. So it looks better to revert this patch. Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman

selftests: mptcp: join: test both signal & subflow

2024-08-14T11:59:04+00:00

commit 4d2868b5d191c74262f7407972d68d1bf3245d6a upstream. It should be quite uncommon to set both the subflow and the signal flags: the initiator of the connection is typically the one creating new subflows, not the other peer, then no need to announce additional local addresses, and use it to create subflows. But some people might be confused about the flags, and set both "just to be sure at least the right one is set". To verify the previous fix, and avoid future regressions, this specific case is now validated: the client announces a new address, and initiates a new subflow from the same address. While working on this, another bug has been noticed, where the client reset the new subflow because an ADD_ADDR echo got received as the 3rd ACK: this new test also explicitly checks that no RST have been sent by the client and server. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk") Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-7-c8a9b036493b@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman

selftests: mptcp: join: ability to invert ADD_ADDR check

2024-08-14T11:59:04+00:00

commit bec1f3b119ebc613d08dfbcdbaef01a79aa7de92 upstream. In the following commit, the client will initiate the ADD_ADDR, instead of the server. We need to way to verify the ADD_ADDR have been correctly sent. Note: the default expected counters for when the port number is given are never changed by the caller, no need to accept them as parameter then. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk") Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-6-c8a9b036493b@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman

mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set

2024-08-14T11:59:04+00:00

commit 85df533a787bf07bf4367ce2a02b822ff1fba1a3 upstream. Up to the 'Fixes' commit, having an endpoint with both the 'signal' and 'subflow' flags, resulted in the creation of a subflow and an address announcement using the address linked to this endpoint. After this commit, only the address announcement was done, ignoring the 'subflow' flag. That's because the same bitmap is used for the two flags. It is OK to keep this single bitmap, the already selected local endpoint simply have to be re-used, but not via select_local_address() not to look at the just modified bitmap. Note that it is unusual to set the two flags together: creating a new subflow using a new local address will implicitly advertise it to the other peer. So in theory, no need to advertise it explicitly as well. Maybe there are use-cases -- the subflow might not reach the other peer that way, we can ask the other peer to try initiating the new subflow without delay -- or very likely the user is confused, and put both flags "just to be sure at least the right one is set". Still, if it is allowed, the kernel should do what has been asked: using this endpoint to announce the address and to create a new subflow from it. An alternative is to forbid the use of the two flags together, but that's probably too late, there are maybe use-cases, and it was working before. This patch will avoid people complaining subflows are not created using the endpoint they added with the 'subflow' and 'signal' flag. Note that with the current patch, the subflow might not be created in some corner cases, e.g. if the 'subflows' limit was reached when sending the ADD_ADDR, but changed later on. It is probably not worth splitting id_avail_bitmap per target ('signal', 'subflow'), which will add another large field to the msk "just" to track (again) endpoints. Anyway, currently when the limits are changed, the kernel doesn't check if new subflows can be created or removed, because we would need to keep track of the received ADD_ADDR, and more. It sounds OK to assume that the limits should be properly configured before establishing new connections. Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk") Cc: stable@vger.kernel.org Suggested-by: Paolo Abeni Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-5-c8a9b036493b@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman

mptcp: pm: don't try to create sf if alloc failed

2024-08-14T11:59:03+00:00

commit cd7c957f936f8cb80d03e5152f4013aae65bd986 upstream. It sounds better to avoid wasting cycles and / or put extreme memory pressure on the system by trying to create new subflows if it was not possible to add a new item in the announce list. While at it, a warning is now printed if the entry was already in the list as it should not happen with the in-kernel path-manager. With this PM, mptcp_pm_alloc_anno_list() should only fail in case of memory pressure. Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Suggested-by: Paolo Abeni Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-4-c8a9b036493b@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman

mptcp: pm: reduce indentation blocks

2024-08-14T11:59:03+00:00

commit c95eb32ced823a00be62202b43966b07b2f20b7f upstream. That will simplify the following commits. No functional changes intended. Suggested-by: Paolo Abeni Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-3-c8a9b036493b@kernel.org Signed-off-by: Jakub Kicinski Stable-dep-of: cd7c957f936f ("mptcp: pm: don't try to create sf if alloc failed") Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman

xfs: fix log recovery buffer allocation for the legacy h_size fixup

2024-08-14T11:59:03+00:00

commit 45cf976008ddef4a9c9a30310c9b4fb2a9a6602a upstream. Commit a70f9fe52daa ("xfs: detect and handle invalid iclog size set by mkfs") added a fixup for incorrect h_size values used for the initial umount record in old xfsprogs versions. Later commit 0c771b99d6c9 ("xfs: clean up calculation of LR header blocks") cleaned up the log reover buffer calculation, but stoped using the fixed up h_size value to size the log recovery buffer, which can lead to an out of bounds access when the incorrect h_size does not come from the old mkfs tool, but a fuzzer. Fix this by open coding xlog_logrec_hblks and taking the fixed h_size into account for this calculation. Fixes: 0c771b99d6c9 ("xfs: clean up calculation of LR header blocks") Reported-by: Sam Sun Signed-off-by: Christoph Hellwig Reviewed-by: Brian Foster Reviewed-by: "Darrick J. Wong" Signed-off-by: Chandan Babu R Signed-off-by: Kevin Berry Signed-off-by: Greg Kroah-Hartman

nouveau: set placement to original placement on uvmm validate.

2024-08-14T11:59:03+00:00

commit 9c685f61722d30a22d55bb8a48f7a48bb2e19bcc upstream. When a buffer is evicted for memory pressure or TTM evict all, the placement is set to the eviction domain, this means the buffer never gets revalidated on the next exec to the correct domain. I think this should be fine to use the initial domain from the object creation, as least with VM_BIND this won't change after init so this should be the correct answer. Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI") Cc: Danilo Krummrich Cc: # v6.6 Signed-off-by: Dave Airlie Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20240515025542.2156774-1-airlied@gmail.com Signed-off-by: Danilo Krummrich Signed-off-by: Greg Kroah-Hartman