kernel/linux.git, branch v6.19.7

Linux 6.19.7

2026-03-12T11:13:58+00:00

Tested-by: Brett A C Sheffield Tested-by: Ronald Warsow Tested-by: Jon Hunter Tested-by: Mark Brown Tested-by: Justin M. Forbes Tested-by: Ron Economos Tested-by: Peter Schneider Tested-by: Takeshi Ogasawara Tested-by: Luna Jernberg Tested-by: Shuah Khan Tested-by: Barry K. Nathan Tested-by: Miguel Ojeda Tested-by: Dileep malepu Signed-off-by: Sasha Levin

selftests/bpf: Avoid simplification of crafted bounds test

2026-03-12T11:10:01+00:00

[ Upstream commit 024cea2d647ed8ab942f19544b892d324dba42b4 ] The reg_bounds_crafted tests validate the verifier's range analysis logic. They focus on the actual ranges and thus ignore the tnum. As a consequence, they carry the assumption that the tested cases can be reproduced in userspace without using the tnum information. Unfortunately, the previous change the refinement logic breaks that assumption for one test case: (u64)2147483648 (u32) [4294967294; 0x100000000] The tested bytecode is shown below. Without our previous improvement, on the false branch of the condition, R7 is only known to have u64 range [0xfffffffe; 0x100000000]. With our improvement, and using the tnum information, we can deduce that R7 equals 0x100000000. 19: (bc) w0 = w6 ; R6=0x80000000 20: (bc) w0 = w7 ; R7=scalar(smin=umin=0xfffffffe,smax=umax=0x100000000,smin32=-2,smax32=0,var_off=(0x0; 0x1ffffffff)) 21: (be) if w6 <= w7 goto pc+3 ; R6=0x80000000 R7=0x100000000 R7's tnum is (0; 0x1ffffffff). On the false branch, regs_refine_cond_op refines R7's u32 range to [0; 0x7fffffff]. Then, __reg32_deduce_bounds refines the s32 range to 0 using u32 and finally also sets u32=0. From this, __reg_bound_offset improves the tnum to (0; 0x100000000). Finally, our previous patch uses this new tnum to deduce that it only intersect with u64=[0xfffffffe; 0x100000000] in a single value: 0x100000000. Because the verifier uses the tnum to reach this constant value, the selftest is unable to reproduce it by only simulating ranges. The solution implemented in this patch is to change the test case such that there is more than one overlap value between u64 and the tnum. The max. u64 value is thus changed from 0x100000000 to 0x300000000. Acked-by: Eduard Zingerman Signed-off-by: Paul Chaignon Link: https://lore.kernel.org/r/50641c6a7ef39520595dcafa605692427c1006ec.1772225741.git.paul.chaignon@gmail.com Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin

bpf: collect only live registers in linked regs

2026-03-12T11:10:01+00:00

[ Upstream commit 2658a1720a1944fbaeda937000ad2b3c3dfaf1bb ] Fix an inconsistency between func_states_equal() and collect_linked_regs(): - regsafe() uses check_ids() to verify that cached and current states have identical register id mapping. - func_states_equal() calls regsafe() only for registers computed as live by compute_live_registers(). - clean_live_states() is supposed to remove dead registers from cached states, but it can skip states belonging to an iterator-based loop. - collect_linked_regs() collects all registers sharing the same id, ignoring the marks computed by compute_live_registers(). Linked registers are stored in the state's jump history. - backtrack_insn() marks all linked registers for an instruction as precise whenever one of the linked registers is precise. The above might lead to a scenario: - There is an instruction I with register rY known to be dead at I. - Instruction I is reached via two paths: first A, then B. - On path A: - There is an id link between registers rX and rY. - Checkpoint C is created at I. - Linked register set {rX, rY} is saved to the jump history. - rX is marked as precise at I, causing both rX and rY to be marked precise at C. - On path B: - There is no id link between registers rX and rY, otherwise register states are sub-states of those in C. - Because rY is dead at I, check_ids() returns true. - Current state is considered equal to checkpoint C, propagate_precision() propagates spurious precision mark for register rY along the path B. - Depending on a program, this might hit verifier_bug() in the backtrack_insn(), e.g. if rY ∈ [r1..r5] and backtrack_insn() spots a function call. The reproducer program is in the next patch. This was hit by sched_ext scx_lavd scheduler code. Changes in tests: - verifier_scalar_ids.c selftests need modification to preserve some registers as live for __msg() checks. - exceptions_assert.c adjusted to match changes in the verifier log, R0 is dead after conditional instruction and thus does not get range. - precise.c adjusted to match changes in the verifier log, register r9 is dead after comparison and it's range is not important for test. Reported-by: Emil Tsalapatis Fixes: 0fb3cf6110a5 ("bpf: use register liveness information for func_states_equal") Signed-off-by: Eduard Zingerman Link: https://lore.kernel.org/r/20260306-linked-regs-and-propagate-precision-v1-1-18e859be570d@gmail.com Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin

tracing: Add NULL pointer check to trigger_data_free()

2026-03-12T11:10:01+00:00

[ Upstream commit 457965c13f0837a289c9164b842d0860133f6274 ] If trigger_data_alloc() fails and returns NULL, event_hist_trigger_parse() jumps to the out_free error path. While kfree() safely handles a NULL pointer, trigger_data_free() does not. This causes a NULL pointer dereference in trigger_data_free() when evaluating data->cmd_ops->set_filter. Fix the problem by adding a NULL pointer check to trigger_data_free(). The problem was found by an experimental code review agent based on gemini-3.1-pro while reviewing backports into v6.18.y. Cc: Miaoqian Lin Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Cc: Steven Rostedt (Google) Link: https://patch.msgid.link/20260305193339.2810953-1-linux@roeck-us.net Fixes: 0550069cc25f ("tracing: Properly process error handling in event_hist_trigger_parse()") Assisted-by: Gemini:gemini-3.1-pro Signed-off-by: Guenter Roeck Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin

selftest/arm64: Fix sve2p1_sigill() to hwcap test

2026-03-12T11:10:01+00:00

[ Upstream commit d87c828daa7ead9763416f75cc416496969cf1dc ] The FEAT_SVE2p1 is indicated by ID_AA64ZFR0_EL1.SVEver. However, the BFADD requires the FEAT_SVE_B16B16, which is indicated by ID_AA64ZFR0_EL1.B16B16. This could cause the test to incorrectly fail on a CPU that supports FEAT_SVE2.1 but not FEAT_SVE_B16B16. LD1Q Gather load quadwords which is decoded from SVE encodings and implied by FEAT_SVE2p1. Fixes: c5195b027d29 ("kselftest/arm64: Add SVE 2.1 to hwcap test") Signed-off-by: Yifan Wu Reviewed-by: Mark Brown Signed-off-by: Will Deacon Signed-off-by: Sasha Levin

ata: libata-eh: Fix detection of deferred qc timeouts

2026-03-12T11:10:01+00:00

[ Upstream commit ee0e6e69a772d601e152e5368a1da25d656122a8 ] If the ata_qc_for_each_raw() loop finishes without finding a matching SCSI command for any QC, the variable qc will hold a pointer to the last element examined, which has the tag i == ATA_MAX_QUEUE - 1. This qc can match the port deferred QC (ap->deferred_qc). If that happens, the condition qc == ap->deferred_qc evaluates to true despite the loop not breaking with a match on the SCSI command for this QC. In that case, the error handler mistakenly intercepts a command that has not been issued yet and that has not timed out, and thus erroneously returning a timeout error. Fix the problem by checking for i < ATA_MAX_QUEUE in addition to qc == ap->deferred_qc. The problem was found by an experimental code review agent based on gemini-3.1-pro while reviewing backports into v6.18.y. Assisted-by: Gemini:gemini-3.1-pro Fixes: eddb98ad9364 ("ata: libata-eh: correctly handle deferred qc timeouts") Signed-off-by: Guenter Roeck [cassel: modified commit log as suggested by Damien] Reviewed-by: Damien Le Moal Signed-off-by: Niklas Cassel Signed-off-by: Sasha Levin

accel: ethosu: Fix NPU_OP_ELEMENTWISE validation with scalar

2026-03-12T11:10:00+00:00

[ Upstream commit 838ae99f9a77a5724ee6d4e7b7b1eb079147f888 ] The NPU_OP_ELEMENTWISE instruction uses a scalar value for IFM2 if the IFM2_BROADCAST "scalar" mode is set. It is a bit (7) on the u65 and part of a field (bits 3:0) on the u85. The driver was hardcoded to the u85. Fixes: 5a5e9c0228e6 ("accel: Add Arm Ethos-U NPU driver") Reviewed-and-Tested-by: Anders Roxell Link: https://patch.msgid.link/20260218-ethos-fixes-v1-2-be3fa3ea9a30@kernel.org Signed-off-by: Rob Herring (Arm) Signed-off-by: Sasha Levin

accel: ethosu: Fix job submit error clean-up refcount underflows

2026-03-12T11:10:00+00:00

[ Upstream commit 150bceb3e0a4a30950279d91ea0e8cc69a736742 ] If the job submit fails before adding the job to the scheduler queue such as when the GEM buffer bounds checks fail, then doing a ethosu_job_put() results in a pm_runtime_put_autosuspend() without the corresponding pm_runtime_resume_and_get(). The dma_fence_put()'s are also unnecessary, but seem to be harmless. Split the ethosu_job_cleanup() function into 2 parts for the before and after the job is queued. Fixes: 5a5e9c0228e6 ("accel: Add Arm Ethos-U NPU driver") Reviewed-and-Tested-by: Anders Roxell Link: https://patch.msgid.link/20260218-ethos-fixes-v1-1-be3fa3ea9a30@kernel.org Signed-off-by: Rob Herring (Arm) Signed-off-by: Sasha Levin

xdp: produce a warning when calculated tailroom is negative

2026-03-12T11:10:00+00:00

[ Upstream commit 8821e857759be9db3cde337ad328b71fe5c8a55f ] Many ethernet drivers report xdp Rx queue frag size as being the same as DMA write size. However, the only user of this field, namely bpf_xdp_frags_increase_tail(), clearly expects a truesize. Such difference leads to unspecific memory corruption issues under certain circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses all DMA-writable space in 2 buffers. This would be fine, if only rxq->frag_size was properly set to 4K, but value of 3K results in a negative tailroom, because there is a non-zero page offset. We are supposed to return -EINVAL and be done with it in such case, but due to tailroom being stored as an unsigned int, it is reported to be somewhere near UINT_MAX, resulting in a tail being grown, even if the requested offset is too much (it is around 2K in the abovementioned test). This later leads to all kinds of unspecific calltraces. [ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6 [ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4 [ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000] [ 7340.339230] in xskxceiver[42b5,400000+69000] [ 7340.340300] likely on CPU 6 (core 0, socket 6) [ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe [ 7340.340888] likely on CPU 3 (core 0, socket 3) [ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7 [ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI [ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy) [ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014 [ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80 [ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89 [ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202 [ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010 [ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff [ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0 [ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0 [ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500 [ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000 [ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0 [ 7340.421237] PKRU: 55555554 [ 7340.421623] Call Trace: [ 7340.421987] [ 7340.422309] ? softleaf_from_pte+0x77/0xa0 [ 7340.422855] swap_pte_batch+0xa7/0x290 [ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270 [ 7340.424102] zap_pte_range+0x281/0x580 [ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240 [ 7340.425177] unmap_page_range+0x24d/0x420 [ 7340.425714] unmap_vmas+0xa1/0x180 [ 7340.426185] exit_mmap+0xe1/0x3b0 [ 7340.426644] __mmput+0x41/0x150 [ 7340.427098] exit_mm+0xb1/0x110 [ 7340.427539] do_exit+0x1b2/0x460 [ 7340.427992] do_group_exit+0x2d/0xc0 [ 7340.428477] get_signal+0x79d/0x7e0 [ 7340.428957] arch_do_signal_or_restart+0x34/0x100 [ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0 [ 7340.430159] do_syscall_64+0x188/0x6b0 [ 7340.430672] ? __do_sys_clone3+0xd9/0x120 [ 7340.431212] ? switch_fpu_return+0x4e/0xd0 [ 7340.431761] ? arch_exit_to_user_mode_prepare.isra.0+0xa1/0xc0 [ 7340.432498] ? do_syscall_64+0xbb/0x6b0 [ 7340.433015] ? __handle_mm_fault+0x445/0x690 [ 7340.433582] ? count_memcg_events+0xd6/0x210 [ 7340.434151] ? handle_mm_fault+0x212/0x340 [ 7340.434697] ? do_user_addr_fault+0x2b4/0x7b0 [ 7340.435271] ? clear_bhb_loop+0x30/0x80 [ 7340.435788] ? clear_bhb_loop+0x30/0x80 [ 7340.436299] ? clear_bhb_loop+0x30/0x80 [ 7340.436812] ? clear_bhb_loop+0x30/0x80 [ 7340.437323] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 7340.437973] RIP: 0033:0x7f4161b14169 [ 7340.438468] Code: Unable to access opcode bytes at 0x7f4161b1413f. [ 7340.439242] RSP: 002b:00007ffc6ebfa770 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca [ 7340.440173] RAX: fffffffffffffe00 RBX: 00000000000005a1 RCX: 00007f4161b14169 [ 7340.441061] RDX: 00000000000005a1 RSI: 0000000000000109 RDI: 00007f415bfff990 [ 7340.441943] RBP: 00007ffc6ebfa7a0 R08: 0000000000000000 R09: 00000000ffffffff [ 7340.442824] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 7340.443707] R13: 0000000000000000 R14: 00007f415bfff990 R15: 00007f415bfff6c0 [ 7340.444586] [ 7340.444922] Modules linked in: rfkill intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit libnvdimm kvm_intel vfat fat kvm snd_pcm irqbypass rapl iTCO_wdt snd_timer intel_pmc_bxt iTCO_vendor_support snd ixgbevf virtio_net soundcore i2c_i801 pcspkr libeth_xdp net_failover i2c_smbus lpc_ich failover libeth virtio_balloon joydev 9p fuse loop zram lz4hc_compress lz4_compress 9pnet_virtio 9pnet netfs ghash_clmulni_intel serio_raw qemu_fw_cfg [ 7340.449650] ---[ end trace 0000000000000000 ]--- The issue can be fixed in all in-tree drivers, but we cannot just trust OOT drivers to not do this. Therefore, make tailroom a signed int and produce a warning when it is negative to prevent such mistakes in the future. Fixes: bf25146a5595 ("bpf: add frags support to the bpf_xdp_adjust_tail() API") Reviewed-by: Aleksandr Loktionov Reviewed-by: Toke Høiland-Jørgensen Acked-by: Martin KaFai Lau Signed-off-by: Larysa Zaremba Link: https://patch.msgid.link/20260305111253.2317394-10-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: enetc: use truesize as XDP RxQ info frag_size

2026-03-12T11:10:00+00:00

[ Upstream commit f8e18abf183dbd636a8725532c7f5aa58957de84 ] The only user of frag_size field in XDP RxQ info is bpf_xdp_frags_increase_tail(). It clearly expects truesize instead of DMA write size. Different assumptions in enetc driver configuration lead to negative tailroom. Set frag_size to the same value as frame_sz. Fixes: 2768b2e2f7d2 ("net: enetc: register XDP RX queues with frag_size") Reviewed-by: Aleksandr Loktionov Reviewed-by: Vladimir Oltean Signed-off-by: Larysa Zaremba Link: https://patch.msgid.link/20260305111253.2317394-9-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin