kernel/linux.git, branch v6.18.56

Linux 6.18.56

2026-10-11T13:26:12+00:00

Link: https://lore.kernel.org/r/20261009140952.119038291@linuxfoundation.org Tested-by: Brett A C Sheffield Tested-by: Peter Schneider Tested-by: Florian Fainelli Tested-by: Ron Economos Tested-by: Wentao Guan Tested-by: Barry K. Nathan Tested-by: Slade Watkins Signed-off-by: Greg Kroah-Hartman

ipv4: free inet_opt and ireq_opt after an RCU grace period

2026-10-11T13:26:12+00:00

commit e3f33b0a1d89d738e2b913dab519226eaf76e15b upstream. tcp_v4_syn_recv_sock() transfers ownership of ireq->ireq_opt to the child socket (newinet->inet_opt) without copying it. Another cpu can concurrently process a retransmitted SYN for the same request socket, and send a SYNACK from tcp_check_req(). tcp_v4_send_synack() and inet_csk_route_req() read ireq->ireq_opt under rcu_read_lock() only, and ip_build_and_send_pkt() and ip_options_build() then read opt->optlen twice. Note that the SYNACK timer itself is not an issue: it holds a reference on its request socket, and inet_csk_reqsk_queue_drop() calls timer_delete_sync() before the child can be freed. Since commit 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table"), request sockets are processed without holding the listener lock, so nothing prevents the child socket from being freed while the SYNACK is still being built. TCP child sockets do not have SOCK_RCU_FREE, and inet_sock_destruct() frees inet_opt with a plain kfree(), leading to a use-after-free in ip_options_build(). A similar issue exists with request socket migration (net.ipv4.tcp_migrate_req=1, or a BPF_SK_REUSEPORT_SELECT_OR_MIGRATE program). reqsk_timer_handler() clones the request socket with inet_reqsk_clone(), so that the old request socket and its clone share the same ireq_opt, then reqsk_migrate_reset() clears the pointer in the old one. Another cpu holding a reference on the old request socket can still be using these options (sending a SYNACK, or creating a child in tcp_v4_syn_recv_sock()) when the clone is freed, and tcp_v4_reqsk_destructor() also uses a plain kfree(). Readers already use RCU, and other paths replacing inet_opt (do_ip_setsockopt(), cipso_v4_sock_setattr()...) already use kfree_rcu(). Use kfree_rcu() in inet_sock_destruct() and tcp_v4_reqsk_destructor() as well. IPv6 is not affected by the first issue, because tcp_v6_syn_recv_sock() duplicates the options. tcp_v6_reqsk_destructor() has the same migration issue with ipv6_opt, which is only set by CALIPSO. This will be addressed in a separate patch. Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table") Fixes: c905dee62232 ("tcp: Migrate TCP_NEW_SYN_RECV requests at retransmitting SYN+ACKs.") Reported-by: Xinyang Ge Signed-off-by: Eric Dumazet Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20261001221253.2964024-1-edumazet@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

iio: adc: adi-axi-adc: Initialize state mutex

2026-10-11T13:26:12+00:00

[ Upstream commit 549b71ce050637dd32678371ad76c445a2f8c9aa ] The AXI ADC register access paths serialize transactions with st->lock, but probe does not initialize it. Initialize the mutex before registering the backend. Fixes: 7ecb8ee5c93b ("iio: adc: adi-axi-adc: support digital interface calibration") Signed-off-by: Janani Sunil Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

iio: adc: adi-axi-adc: Make use of dev_err_probe()

2026-10-11T13:26:12+00:00

[ Upstream commit 634a6316617e2ced7016b002d0b284a1502e9601 ] Be consistent and use dev_err_probe() as in all other places in the .probe() path. While at it, remove the line break in the version condition. Yes, it goes over the 80 column limit but I do think the line break hurts readability in this case. And use a struct device *dev helper for neater code. Signed-off-by: Nuno Sá Signed-off-by: Jonathan Cameron Stable-dep-of: 549b71ce0506 ("iio: adc: adi-axi-adc: Initialize state mutex") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

iio: buffer-dmaengine: fix sg entry iteration when building dma_vecs

2026-10-11T13:26:12+00:00

[ Upstream commit 0d0ffbcc92e30a8d656ad76a6e278fa3400fed85 ] iio_dmaengine_buffer_submit_block() counts scatterlist entries with sg_nents_for_len(), which walks the CPU-side lengths (sg->length), but then consumes the DMA-side fields (sg_dma_address()/sg_dma_len()). After dma_map_sgtable() the two views may differ: an IOMMU can coalesce the mapping so that only the first sgt->nents entries carry valid DMA addresses, with nents < orig_nents. On x86 with an IOMMU enabled, a DMABUF block backed by two 1 MiB system-heap chunks maps to a single 2 MiB IOVA range. The CPU-side count is 2, so the loop reads one entry past the mapped set and emits a garbage vec ({addr = ~0, len = 0}). The DMA engine driver rejects the vec array (prep returns NULL), the fence is signalled with -ENOMEM, which a userspace poller cannot observe, and the block is left in ACTIVE state so every further enqueue of it fails with -EBUSY. The visible symptom is a stream of zero-filled blocks followed by a wedged buffer. Platforms without an IOMMU never hit this because nents == orig_nents. Size the vec array with sgt->nents, i.e. the DMA-mapped view, and stop the fill loop once bytes_used is covered - which is allowed to be smaller than the block size - passing the number of vecs actually filled to dmaengine_prep_peripheral_dma_vec(). One vec per mapped entry is enough since coalescing can only ever reduce the number of entries. A single mapped entry longer than the device's maximum segment size would need more than one, but the DMA API already assumes no single segment exceeds it [1], and splitting a vec down to the hardware descriptor size is the DMA engine driver's job - which both current .device_prep_peripheral_dma_vec() implementations do. [1]: commit ab2cbeb0ed30 ("iommu/dma: Handle SG length overflow better") Assisted-by: Claude:claude-fable-5 Fixes: 7a86d469983a ("iio: buffer-dmaengine: Support new DMABUF based userspace API") Signed-off-by: Michael Hennerich Signed-off-by: Nuno Sá Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron [ sashal: Adjusted context for DMA preparation using DMA_PREP_INTERRUPT directly instead of cyclic transfer flags. ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: mana: Sync page pool RX frags for CPU

2026-10-11T13:26:12+00:00

[ Upstream commit c72a0f09c57f92113df69f9b902d11c9e4b132f5 ] MANA allocates RX buffers from page pool fragments when frag_count is greater than 1. In that case the buffers remain DMA mapped by page pool and the RX completion path does not call dma_unmap_single(). As a result, the implicit sync-for-CPU normally performed by dma_unmap_single() is missing before the packet data is passed to the networking stack. This breaks RX on configurations which require explicit DMA syncing, for example when booted with swiotlb=force. Fix this by recording the page pool page and DMA sync offset when the RX buffer is allocated, and syncing the received packet range for CPU access before handing the RX buffer to the stack. Fixes: 730ff06d3f5c ("net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency.") Cc: stable@vger.kernel.org Reviewed-by: Haiyang Zhang Signed-off-by: Dexuan Cui Link: https://patch.msgid.link/20260702041237.617719-3-decui@microsoft.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: mana: remove double CQ cleanup in mana_create_rxq error path

2026-10-11T13:26:12+00:00

[ Upstream commit 3985c9a56da49af8b2e45cb1fa55c03c89b1d471 ] In mana_create_rxq(), the error cleanup path calls mana_destroy_rxq() followed by mana_deinit_cq(). This is incorrect for two reasons: 1. mana_destroy_rxq() already calls mana_deinit_cq() internally, so the CQ's GDMA queue is destroyed twice. 2. mana_destroy_rxq() frees the rxq via kfree(rxq) before returning. The subsequent mana_deinit_cq(apc, cq) then operates on freed memory since cq points to &rxq->rx_cq, which is embedded in the already-freed rxq structure — a use-after-free. Remove the redundant mana_deinit_cq() call from the error path since mana_destroy_rxq() already handles CQ cleanup. mana_deinit_cq() is itself safe for an uninitialized CQ as it checks for a NULL gdma_cq before proceeding. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Reviewed-by: Haiyang Zhang Signed-off-by: Dipayaan Roy Reviewed-by: Aditya Garg Link: https://patch.msgid.link/20260430035935.1859220-4-dipayanroy@linux.microsoft.com Reviewed-by: Simon Horman Signed-off-by: Paolo Abeni Signed-off-by: Hamza Mahfooz Signed-off-by: Sasha Levin

xen/netfront: drop RX packets with a short Ethernet header

2026-10-11T13:26:12+00:00

commit 089e58805c452e52179482b1025a8e309a57f801 upstream. handle_incoming_queue() pulls pull_to bytes into the head before calling eth_type_trans(). pull_to is the length of the first RX slot, capped at RX_COPY_THRESHOLD, and that length comes from the backend. Nothing checks it against ETH_HLEN. If the first slot is shorter than ETH_HLEN and more slots follow, the head ends up shorter than an Ethernet header while skb->len is longer, and eth_type_trans() BUG()s in __skb_pull(). If the whole packet is shorter than ETH_HLEN, eth_type_trans() reads the header past the end of the data instead. Pull at least ETH_HLEN, and drop the packet if that fails, which also drops packets too short to hold an Ethernet header. This also checks the return value of the pull, which was ignored. Fixes: 0d160211965b ("xen: add virtual network device driver") Cc: stable@vger.kernel.org Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261007-b4-xen-netfront-short-head-v1-1-12d7113a7e4e@toxicpanda.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: usb: qmi_wwan: add Quectel EG120K-EA

2026-10-11T13:26:12+00:00

commit 0f2fd31f63c65c409bd336af3a42d478a9207c1f upstream. Add support for the Quectel EG120K-EA LTE Cat.12 module (USB ID 2c7c:030b). Its QMI interface (interface 4) uses class/subclass/protocol ff/ff/ff like the other recent Quectel modules, so match it the same way. The product ID is shared with the EM060K, which the option driver already knows and uses to claim the serial interfaces. Without a qmi_wwan entry the data interface is left unbound. Tested on a GL.iNet GL-X2000, where the module is soldered down and enumerates at SuperSpeed: cdc-wdm0 and wwan0 appear and ModemManager brings up a data session. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=030b Rev= 5.04 S: Manufacturer=Quectel S: Product=EG120K-EA S: SerialNumber=45546267 C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#=12 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Gilberto Conde Link: https://patch.msgid.link/20260921093426.2870266-1-gilbertorconde@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

KVM: x86: Re-pend GET_NESTED_STATE_PAGES if getting said pages fails

2026-10-11T13:26:12+00:00

[ Upstream commit 10180a277549339020b08000206092c07e0bff5a ] Re-pend GET_NESTED_STATE_PAGES before exiting to userspace if getting the nested pages fails in the KVM_RUN path. If userspace re-runs the vCPU, and vmcs02 holds valid PFNs from the *previous* run of L2, then KVM could re-enter L2 with stale, unpinned PFNs mapped into e.g. the vAPIC page. Note, both SVM and VMX (as of commit 11722439fb20 ("KVM: nVMX: Ensure KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit") ensure the request is cleared on VM-Exit (including the "forced" case), i.e. there is no risk of double-mapping due to emulated VMLAUNCH/VMRESUME/VMRUN *and* the request trying to map the nested pages. Fixes: 671ddc700fd0 ("KVM: nVMX: Don't leak L1 MMIO regions to L2") Cc: stable@vger.kernel.org Reported-by: Jinwoo Lee Closes: https://lore.kernel.org/all/20260813043932.3214460-1-rkskek9254@gmail.com Reported-by: Stefan Teodorescu Link: https://patch.msgid.link/20260921211608.1030158-2-seanjc@google.com Signed-off-by: Sean Christopherson Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman